view hgext/blackbox.py @ 37295:45b39c69fae0

wireproto: separate commands tables for version 1 and 2 commands

We can't easily reuse existing command handlers for version 2
commands because the response types will be different. e.g. many
commands return nodes encoded as hex. Our new wire protocol is
binary safe, so we'll wish to encode nodes as binary.

We /could/ teach each command handler to look at the protocol
handler and change behavior based on the version in use. However,
this would make logic a bit unwieldy over time and would make
it harder to design a unified protocol handler interface. I think
it's better to create a clean break between version 1 and version 2
of commands on the server.

What I imagine happening is we will have separate @wireprotocommand
functions for each protocol generation. Those functions will parse the
request, dispatch to a common function to process it, then generate
the response in its own, transport-specific manner.

This commit establishes a separate table for tracking version 1
commands from version 2 commands. The HTTP server pieces have been
updated to use this new table.

Most commands are marked as both version 1 and version 2, so there is
little practical impact to this change.

A side-effect of this change is we now rely on transport registration
in wireprototypes.TRANSPORTS and certain properties of the protocol
interface. So a test had to be updated to conform.

Differential Revision: https://phab.mercurial-scm.org/D2982

# blackbox.py - log repository events to a file for post-mortem debugging
#
# Copyright 2010 Nicolas Dumazet
# Copyright 2013 Facebook, Inc.
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.

"""log repository events to a blackbox for debugging

Logs event information to .hg/blackbox.log to help debug and diagnose problems.
The events that get logged can be configured via the blackbox.track config key.

Examples::

  [blackbox]
  track = *
  # dirty is *EXPENSIVE* (slow);
  # each log entry indicates `+` if the repository is dirty, like :hg:`id`.
  dirty = True
  # record the source of log messages
  logsource = True

  [blackbox]
  track = command, commandfinish, commandexception, exthook, pythonhook

  [blackbox]
  track = incoming

  [blackbox]
  # limit the size of a log file
  maxsize = 1.5 MB
  # rotate up to N log files when the current one gets too big
  maxfiles = 3

"""

from __future__ import absolute_import

import errno
import re

from mercurial.i18n import _
from mercurial.node import hex

from mercurial import (
    encoding,
    registrar,
    ui as uimod,
    util,
)
from mercurial.utils import (
    dateutil,
    procutil,
)

# Note for extension authors: ONLY specify testedwith = 'ships-with-hg-core' for
# extensions which SHIP WITH MERCURIAL. Non-mainline extensions should
# be specifying the version(s) of Mercurial they are tested with, or
# leave the attribute unspecified.
testedwith = 'ships-with-hg-core'

cmdtable = {}
command = registrar.command(cmdtable)

configtable = {}
configitem = registrar.configitem(configtable)

configitem('blackbox', 'dirty',
    default=False,
)
configitem('blackbox', 'maxsize',
    default='1 MB',
)
configitem('blackbox', 'logsource',
    default=False,
)
configitem('blackbox', 'maxfiles',
    default=7,
)
configitem('blackbox', 'track',
    default=lambda: ['*'],
)

lastui = None

def _openlogfile(ui, vfs):
    def rotate(oldpath, newpath):
        try:
            vfs.unlink(newpath)
        except OSError as err:
            if err.errno != errno.ENOENT:
                ui.debug("warning: cannot remove '%s': %s\n" %
                         (newpath, err.strerror))
        try:
            if newpath:
                vfs.rename(oldpath, newpath)
        except OSError as err:
            if err.errno != errno.ENOENT:
                ui.debug("warning: cannot rename '%s' to '%s': %s\n" %
                         (newpath, oldpath, err.strerror))

    maxsize = ui.configbytes('blackbox', 'maxsize')
    name = 'blackbox.log'
    if maxsize > 0:
        try:
            st = vfs.stat(name)
        except OSError:
            pass
        else:
            if st.st_size >= maxsize:
                path = vfs.join(name)
                maxfiles = ui.configint('blackbox', 'maxfiles')
                for i in xrange(maxfiles - 1, 1, -1):
                    rotate(oldpath='%s.%d' % (path, i - 1),
                           newpath='%s.%d' % (path, i))
                rotate(oldpath=path,
                       newpath=maxfiles > 0 and path + '.1')
    return vfs(name, 'a')

def wrapui(ui):
    class blackboxui(ui.__class__):
        @property
        def _bbvfs(self):
            vfs = None
            repo = getattr(self, '_bbrepo', None)
            if repo:
                vfs = repo.vfs
                if not vfs.isdir('.'):
                    vfs = None
            return vfs

        @util.propertycache
        def track(self):
            return self.configlist('blackbox', 'track')

        def debug(self, *msg, **opts):
            super(blackboxui, self).debug(*msg, **opts)
            if self.debugflag:
                self.log('debug', '%s', ''.join(msg))

        def log(self, event, *msg, **opts):
            global lastui
            super(blackboxui, self).log(event, *msg, **opts)

            if not '*' in self.track and not event in self.track:
                return

            if self._bbvfs:
                ui = self
            else:
                # certain ui instances exist outside the context of
                # a repo, so just default to the last blackbox that
                # was seen.
                ui = lastui

            if not ui:
                return
            vfs = ui._bbvfs
            if not vfs:
                return

            repo = getattr(ui, '_bbrepo', None)
            if not lastui or repo:
                lastui = ui
            if getattr(ui, '_bbinlog', False):
                # recursion and failure guard
                return
            ui._bbinlog = True
            default = self.configdate('devel', 'default-date')
            date = dateutil.datestr(default, '%Y/%m/%d %H:%M:%S')
            user = procutil.getuser()
            pid = '%d' % procutil.getpid()
            formattedmsg = msg[0] % msg[1:]
            rev = '(unknown)'
            changed = ''
            if repo:
                ctx = repo[None]
                parents = ctx.parents()
                rev = ('+'.join([hex(p.node()) for p in parents]))
                if (ui.configbool('blackbox', 'dirty') and
                    ctx.dirty(missing=True, merge=False, branch=False)):
                    changed = '+'
            if ui.configbool('blackbox', 'logsource'):
                src = ' [%s]' % event
            else:
                src = ''
            try:
                fmt = '%s %s @%s%s (%s)%s> %s'
                args = (date, user, rev, changed, pid, src, formattedmsg)
                with _openlogfile(ui, vfs) as fp:
                    fp.write(fmt % args)
            except (IOError, OSError) as err:
                self.debug('warning: cannot write to blackbox.log: %s\n' %
                           encoding.strtolocal(err.strerror))
                # do not restore _bbinlog intentionally to avoid failed
                # logging again
            else:
                ui._bbinlog = False

        def setrepo(self, repo):
            self._bbrepo = repo

    ui.__class__ = blackboxui
    uimod.ui = blackboxui

def uisetup(ui):
    wrapui(ui)

def reposetup(ui, repo):
    # During 'hg pull' a httppeer repo is created to represent the remote repo.
    # It doesn't have a .hg directory to put a blackbox in, so we don't do
    # the blackbox setup for it.
    if not repo.local():
        return

    if util.safehasattr(ui, 'setrepo'):
        ui.setrepo(repo)

        # Set lastui even if ui.log is not called. This gives blackbox a
        # fallback place to log.
        global lastui
        if lastui is None:
            lastui = ui

    repo._wlockfreeprefix.add('blackbox.log')

@command('^blackbox',
    [('l', 'limit', 10, _('the number of events to show')),
    ],
    _('hg blackbox [OPTION]...'))
def blackbox(ui, repo, *revs, **opts):
    '''view the recent repository events
    '''

    if not repo.vfs.exists('blackbox.log'):
        return

    limit = opts.get(r'limit')
    fp = repo.vfs('blackbox.log', 'r')
    lines = fp.read().split('\n')

    count = 0
    output = []
    for line in reversed(lines):
        if count >= limit:
            break

        # count the commands by matching lines like: 2013/01/23 19:13:36 root>
        if re.match('^\d{4}/\d{2}/\d{2} \d{2}:\d{2}:\d{2} .*> .*', line):
            count += 1
        output.append(line)

    ui.status('\n'.join(reversed(output)))