view hgext/win32text.py @ 37295:45b39c69fae0

wireproto: separate commands tables for version 1 and 2 commands

We can't easily reuse existing command handlers for version 2
commands because the response types will be different. e.g. many
commands return nodes encoded as hex. Our new wire protocol is
binary safe, so we'll wish to encode nodes as binary.

We /could/ teach each command handler to look at the protocol
handler and change behavior based on the version in use. However,
this would make logic a bit unwieldy over time and would make
it harder to design a unified protocol handler interface. I think
it's better to create a clean break between version 1 and version 2
of commands on the server.

What I imagine happening is we will have separate @wireprotocommand
functions for each protocol generation. Those functions will parse the
request, dispatch to a common function to process it, then generate
the response in its own, transport-specific manner.

This commit establishes a separate table for tracking version 1
commands from version 2 commands. The HTTP server pieces have been
updated to use this new table.

Most commands are marked as both version 1 and version 2, so there is
little practical impact to this change.

A side-effect of this change is we now rely on transport registration
in wireprototypes.TRANSPORTS and certain properties of the protocol
interface. So a test had to be updated to conform.

Differential Revision: https://phab.mercurial-scm.org/D2982

# win32text.py - LF <-> CRLF/CR translation utilities for Windows/Mac users
#
#  Copyright 2005, 2007-2009 Matt Mackall <[e-mail]> and others
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.

'''perform automatic newline conversion (DEPRECATED)

  Deprecation: The win32text extension requires each user to configure
  the extension again and again for each clone since the configuration
  is not copied when cloning.

  We have therefore made the ``eol`` as an alternative. The ``eol``
  uses a version controlled file for its configuration and each clone
  will therefore use the right settings from the start.

To perform automatic newline conversion, use::

  [extensions]
  win32text =
  [encode]
  ** = cleverencode:
  # or ** = macencode:

  [decode]
  ** = cleverdecode:
  # or ** = macdecode:

If not doing conversion, to make sure you do not commit CRLF/CR by accident::

  [hooks]
  pretxncommit.crlf = python:hgext.win32text.forbidcrlf
  # or pretxncommit.cr = python:hgext.win32text.forbidcr

To do the same check on a server to prevent CRLF/CR from being
pushed or pulled::

  [hooks]
  pretxnchangegroup.crlf = python:hgext.win32text.forbidcrlf
  # or pretxnchangegroup.cr = python:hgext.win32text.forbidcr
'''

from __future__ import absolute_import

import re
from mercurial.i18n import _
from mercurial.node import (
    short,
)
from mercurial import (
    registrar,
)
from mercurial.utils import (
    stringutil,
)

# Note for extension authors: ONLY specify testedwith = 'ships-with-hg-core' for
# extensions which SHIP WITH MERCURIAL. Non-mainline extensions should
# be specifying the version(s) of Mercurial they are tested with, or
# leave the attribute unspecified.
testedwith = 'ships-with-hg-core'

configtable = {}
configitem = registrar.configitem(configtable)

configitem('win32text', 'warn',
    default=True,
)

# regexp for single LF without CR preceding.
re_single_lf = re.compile('(^|[^\r])\n', re.MULTILINE)

newlinestr = {'\r\n': 'CRLF', '\r': 'CR'}
filterstr = {'\r\n': 'clever', '\r': 'mac'}

def checknewline(s, newline, ui=None, repo=None, filename=None):
    # warn if already has 'newline' in repository.
    # it might cause unexpected eol conversion.
    # see issue 302:
    #   https://bz.mercurial-scm.org/302
    if newline in s and ui and filename and repo:
        ui.warn(_('WARNING: %s already has %s line endings\n'
                  'and does not need EOL conversion by the win32text plugin.\n'
                  'Before your next commit, please reconsider your '
                  'encode/decode settings in \nMercurial.ini or %s.\n') %
                (filename, newlinestr[newline], repo.vfs.join('hgrc')))

def dumbdecode(s, cmd, **kwargs):
    checknewline(s, '\r\n', **kwargs)
    # replace single LF to CRLF
    return re_single_lf.sub('\\1\r\n', s)

def dumbencode(s, cmd):
    return s.replace('\r\n', '\n')

def macdumbdecode(s, cmd, **kwargs):
    checknewline(s, '\r', **kwargs)
    return s.replace('\n', '\r')

def macdumbencode(s, cmd):
    return s.replace('\r', '\n')

def cleverdecode(s, cmd, **kwargs):
    if not stringutil.binary(s):
        return dumbdecode(s, cmd, **kwargs)
    return s

def cleverencode(s, cmd):
    if not stringutil.binary(s):
        return dumbencode(s, cmd)
    return s

def macdecode(s, cmd, **kwargs):
    if not stringutil.binary(s):
        return macdumbdecode(s, cmd, **kwargs)
    return s

def macencode(s, cmd):
    if not stringutil.binary(s):
        return macdumbencode(s, cmd)
    return s

_filters = {
    'dumbdecode:': dumbdecode,
    'dumbencode:': dumbencode,
    'cleverdecode:': cleverdecode,
    'cleverencode:': cleverencode,
    'macdumbdecode:': macdumbdecode,
    'macdumbencode:': macdumbencode,
    'macdecode:': macdecode,
    'macencode:': macencode,
    }

def forbidnewline(ui, repo, hooktype, node, newline, **kwargs):
    halt = False
    seen = set()
    # we try to walk changesets in reverse order from newest to
    # oldest, so that if we see a file multiple times, we take the
    # newest version as canonical. this prevents us from blocking a
    # changegroup that contains an unacceptable commit followed later
    # by a commit that fixes the problem.
    tip = repo['tip']
    for rev in xrange(repo.changelog.tiprev(), repo[node].rev() - 1, -1):
        c = repo[rev]
        for f in c.files():
            if f in seen or f not in tip or f not in c:
                continue
            seen.add(f)
            data = c[f].data()
            if not stringutil.binary(data) and newline in data:
                if not halt:
                    ui.warn(_('attempt to commit or push text file(s) '
                              'using %s line endings\n') %
                              newlinestr[newline])
                ui.warn(_('in %s: %s\n') % (short(c.node()), f))
                halt = True
    if halt and hooktype == 'pretxnchangegroup':
        crlf = newlinestr[newline].lower()
        filter = filterstr[newline]
        ui.warn(_('\nTo prevent this mistake in your local repository,\n'
                  'add to Mercurial.ini or .hg/hgrc:\n'
                  '\n'
                  '[hooks]\n'
                  'pretxncommit.%s = python:hgext.win32text.forbid%s\n'
                  '\n'
                  'and also consider adding:\n'
                  '\n'
                  '[extensions]\n'
                  'win32text =\n'
                  '[encode]\n'
                  '** = %sencode:\n'
                  '[decode]\n'
                  '** = %sdecode:\n') % (crlf, crlf, filter, filter))
    return halt

def forbidcrlf(ui, repo, hooktype, node, **kwargs):
    return forbidnewline(ui, repo, hooktype, node, '\r\n', **kwargs)

def forbidcr(ui, repo, hooktype, node, **kwargs):
    return forbidnewline(ui, repo, hooktype, node, '\r', **kwargs)

def reposetup(ui, repo):
    if not repo.local():
        return
    for name, fn in _filters.iteritems():
        repo.adddatafilter(name, fn)

def extsetup(ui):
    # deprecated config: win32text.warn
    if ui.configbool('win32text', 'warn'):
        ui.warn(_("win32text is deprecated: "
                  "https://mercurial-scm.org/wiki/Win32TextExtension\n"))