view tests/test-config.t @ 37295:45b39c69fae0

wireproto: separate commands tables for version 1 and 2 commands

We can't easily reuse existing command handlers for version 2
commands because the response types will be different. e.g. many
commands return nodes encoded as hex. Our new wire protocol is
binary safe, so we'll wish to encode nodes as binary.

We /could/ teach each command handler to look at the protocol
handler and change behavior based on the version in use. However,
this would make logic a bit unwieldy over time and would make
it harder to design a unified protocol handler interface. I think
it's better to create a clean break between version 1 and version 2
of commands on the server.

What I imagine happening is we will have separate @wireprotocommand
functions for each protocol generation. Those functions will parse the
request, dispatch to a common function to process it, then generate
the response in its own, transport-specific manner.

This commit establishes a separate table for tracking version 1
commands from version 2 commands. The HTTP server pieces have been
updated to use this new table.

Most commands are marked as both version 1 and version 2, so there is
little practical impact to this change.

A side-effect of this change is we now rely on transport registration
in wireprototypes.TRANSPORTS and certain properties of the protocol
interface. So a test had to be updated to conform.

Differential Revision: https://phab.mercurial-scm.org/D2982

hide outer repo
  $ hg init

Invalid syntax: no value

  $ cat > .hg/hgrc << EOF
  > novaluekey
  > EOF
  $ hg showconfig
  hg: parse error at $TESTTMP/.hg/hgrc:1: novaluekey
  [255]

Invalid syntax: no key

  $ cat > .hg/hgrc << EOF
  > =nokeyvalue
  > EOF
  $ hg showconfig
  hg: parse error at $TESTTMP/.hg/hgrc:1: =nokeyvalue
  [255]

Test hint about invalid syntax from leading white space

  $ cat > .hg/hgrc << EOF
  >  key=value
  > EOF
  $ hg showconfig
  hg: parse error at $TESTTMP/.hg/hgrc:1:  key=value
  unexpected leading whitespace
  [255]

  $ cat > .hg/hgrc << EOF
  >  [section]
  > key=value
  > EOF
  $ hg showconfig
  hg: parse error at $TESTTMP/.hg/hgrc:1:  [section]
  unexpected leading whitespace
  [255]

Reset hgrc

  $ echo > .hg/hgrc

Test case sensitive configuration

  $ cat <<EOF >> $HGRCPATH
  > [Section]
  > KeY = Case Sensitive
  > key = lower case
  > EOF

  $ hg showconfig Section
  Section.KeY=Case Sensitive
  Section.key=lower case

  $ hg showconfig Section -Tjson
  [
   {
    "name": "Section.KeY",
    "source": "*.hgrc:*", (glob)
    "value": "Case Sensitive"
   },
   {
    "name": "Section.key",
    "source": "*.hgrc:*", (glob)
    "value": "lower case"
   }
  ]
  $ hg showconfig Section.KeY -Tjson
  [
   {
    "name": "Section.KeY",
    "source": "*.hgrc:*", (glob)
    "value": "Case Sensitive"
   }
  ]
  $ hg showconfig -Tjson | tail -7
   },
   {
    "name": "*", (glob)
    "source": "*", (glob)
    "value": "*" (glob)
   }
  ]

Test empty config source:

  $ cat <<EOF > emptysource.py
  > def reposetup(ui, repo):
  >     ui.setconfig(b'empty', b'source', b'value')
  > EOF
  $ cp .hg/hgrc .hg/hgrc.orig
  $ cat <<EOF >> .hg/hgrc
  > [extensions]
  > emptysource = `pwd`/emptysource.py
  > EOF

  $ hg config --debug empty.source
  read config from: * (glob)
  none: value
  $ hg config empty.source -Tjson
  [
   {
    "name": "empty.source",
    "source": "",
    "value": "value"
   }
  ]

  $ cp .hg/hgrc.orig .hg/hgrc

Test "%unset"

  $ cat >> $HGRCPATH <<EOF
  > [unsettest]
  > local-hgrcpath = should be unset (HGRCPATH)
  > %unset local-hgrcpath
  > 
  > global = should be unset (HGRCPATH)
  > 
  > both = should be unset (HGRCPATH)
  > 
  > set-after-unset = should be unset (HGRCPATH)
  > EOF

  $ cat >> .hg/hgrc <<EOF
  > [unsettest]
  > local-hgrc = should be unset (.hg/hgrc)
  > %unset local-hgrc
  > 
  > %unset global
  > 
  > both = should be unset (.hg/hgrc)
  > %unset both
  > 
  > set-after-unset = should be unset (.hg/hgrc)
  > %unset set-after-unset
  > set-after-unset = should be set (.hg/hgrc)
  > EOF

  $ hg showconfig unsettest
  unsettest.set-after-unset=should be set (.hg/hgrc)

Test exit code when no config matches

  $ hg config Section.idontexist
  [1]

sub-options in [paths] aren't expanded

  $ cat > .hg/hgrc << EOF
  > [paths]
  > foo = ~/foo
  > foo:suboption = ~/foo
  > EOF

  $ hg showconfig paths
  paths.foo:suboption=~/foo
  paths.foo=$TESTTMP/foo

edit failure

  $ HGEDITOR=false hg config --edit
  abort: edit failed: false exited with status 1
  [255]

config affected by environment variables

  $ EDITOR=e1 VISUAL=e2 hg config --debug | grep 'ui\.editor'
  $VISUAL: ui.editor=e2

  $ VISUAL=e2 hg config --debug --config ui.editor=e3 | grep 'ui\.editor'
  --config: ui.editor=e3

  $ PAGER=p1 hg config --debug | grep 'pager\.pager'
  $PAGER: pager.pager=p1

  $ PAGER=p1 hg config --debug --config pager.pager=p2 | grep 'pager\.pager'
  --config: pager.pager=p2

verify that aliases are evaluated as well

  $ hg init aliastest
  $ cd aliastest
  $ cat > .hg/hgrc << EOF
  > [ui]
  > user = repo user
  > EOF
  $ touch index
  $ unset HGUSER
  $ hg ci -Am test
  adding index
  $ hg log --template '{author}\n'
  repo user
  $ cd ..

alias has lower priority

  $ hg init aliaspriority
  $ cd aliaspriority
  $ cat > .hg/hgrc << EOF
  > [ui]
  > user = alias user
  > username = repo user
  > EOF
  $ touch index
  $ unset HGUSER
  $ hg ci -Am test
  adding index
  $ hg log --template '{author}\n'
  repo user
  $ cd ..