view tests/test-convert-bzr.t @ 37295:45b39c69fae0

wireproto: separate commands tables for version 1 and 2 commands

We can't easily reuse existing command handlers for version 2
commands because the response types will be different. e.g. many
commands return nodes encoded as hex. Our new wire protocol is
binary safe, so we'll wish to encode nodes as binary.

We /could/ teach each command handler to look at the protocol
handler and change behavior based on the version in use. However,
this would make logic a bit unwieldy over time and would make
it harder to design a unified protocol handler interface. I think
it's better to create a clean break between version 1 and version 2
of commands on the server.

What I imagine happening is we will have separate @wireprotocommand
functions for each protocol generation. Those functions will parse the
request, dispatch to a common function to process it, then generate
the response in its own, transport-specific manner.

This commit establishes a separate table for tracking version 1
commands from version 2 commands. The HTTP server pieces have been
updated to use this new table.

Most commands are marked as both version 1 and version 2, so there is
little practical impact to this change.

A side-effect of this change is we now rely on transport registration
in wireprototypes.TRANSPORTS and certain properties of the protocol
interface. So a test had to be updated to conform.

Differential Revision: https://phab.mercurial-scm.org/D2982

#require bzr

  $ . "$TESTDIR/bzr-definitions"

create and rename on the same file in the same step

  $ mkdir test-createandrename
  $ cd test-createandrename
  $ bzr init -q source

test empty repo conversion (issue3233)

  $ hg convert source source-hg
  initializing destination source-hg repository
  scanning source...
  sorting...
  converting...

back to the rename stuff

  $ cd source
  $ echo a > a
  $ echo c > c
  $ echo e > e
  $ bzr add -q a c e
  $ bzr commit -q -m 'Initial add: a, c, e'
  $ bzr mv a b
  a => b
  $ bzr mv c d
  c => d
  $ bzr mv e f
  e => f
  $ echo a2 >> a
  $ mkdir e
  $ bzr add -q a e
  $ bzr commit -q -m 'rename a into b, create a, rename c into d'
  $ cd ..
  $ hg convert source source-hg
  scanning source...
  sorting...
  converting...
  1 Initial add: a, c, e
  0 rename a into b, create a, rename c into d
  $ glog -R source-hg
  o  1@source "rename a into b, create a, rename c into d" files: a b c d e f
  |
  o  0@source "Initial add: a, c, e" files: a c e
  

manifest

  $ hg manifest -R source-hg -r tip
  a
  b
  d
  f

test --rev option

  $ hg convert -r 1 source source-1-hg
  initializing destination source-1-hg repository
  scanning source...
  sorting...
  converting...
  0 Initial add: a, c, e
  $ glog -R source-1-hg
  o  0@source "Initial add: a, c, e" files: a c e
  

test with filemap

  $ cat > filemap <<EOF
  > exclude a
  > EOF
  $ hg convert --filemap filemap source source-filemap-hg
  initializing destination source-filemap-hg repository
  scanning source...
  sorting...
  converting...
  1 Initial add: a, c, e
  0 rename a into b, create a, rename c into d
  $ hg -R source-filemap-hg manifest -r tip
  b
  d
  f

convert from lightweight checkout

  $ bzr checkout --lightweight source source-light
  $ hg convert -s bzr source-light source-light-hg
  initializing destination source-light-hg repository
  warning: lightweight checkouts may cause conversion failures, try with a regular branch instead.
  $TESTTMP/test-createandrename/source-light does not look like a Bazaar repository
  abort: source-light: missing or unsupported repository
  [255]

extract timestamps that look just like hg's {date|isodate}:
yyyy-mm-dd HH:MM zzzz (no seconds!)
compare timestamps

  $ cd source
  $ bzr log | \
  >   sed '/timestamp/!d;s/.\{15\}\([0-9: -]\{16\}\):.. \(.[0-9]\{4\}\)/\1 \2/' \
  >   > ../bzr-timestamps
  $ cd ..
  $ hg -R source-hg log --template "{date|isodate}\n" > hg-timestamps
  $ cmp bzr-timestamps hg-timestamps || diff -u bzr-timestamps hg-timestamps
  $ cd ..

merge

  $ mkdir test-merge
  $ cd test-merge
  $ cat > helper.py <<EOF
  > import sys
  > from bzrlib import workingtree
  > wt = workingtree.WorkingTree.open('.')
  > 
  > message, stamp = sys.argv[1:]
  > wt.commit(message, timestamp=int(stamp))
  > EOF
  $ bzr init -q source
  $ cd source
  $ echo content > a
  $ echo content2 > b
  $ bzr add -q a b
  $ bzr commit -q -m 'Initial add'
  $ cd ..
  $ bzr branch -q source source-improve
  $ cd source
  $ echo more >> a
  $ $PYTHON ../helper.py 'Editing a' 100
  $ cd ../source-improve
  $ echo content3 >> b
  $ $PYTHON ../helper.py 'Editing b' 200
  $ cd ../source
  $ bzr merge -q ../source-improve
  $ bzr commit -q -m 'Merged improve branch'
  $ cd ..
  $ hg convert --datesort source source-hg
  initializing destination source-hg repository
  scanning source...
  sorting...
  converting...
  3 Initial add
  2 Editing a
  1 Editing b
  0 Merged improve branch
  $ glog -R source-hg
  o    3@source "Merged improve branch" files:
  |\
  | o  2@source-improve "Editing b" files: b
  | |
  o |  1@source "Editing a" files: a
  |/
  o  0@source "Initial add" files: a b
  
  $ cd ..

#if symlink execbit

symlinks and executable files

  $ mkdir test-symlinks
  $ cd test-symlinks
  $ bzr init -q source
  $ cd source
  $ touch program
  $ chmod +x program
  $ ln -s program altname
  $ mkdir d
  $ echo a > d/a
  $ ln -s a syma
  $ bzr add -q altname program syma d/a
  $ bzr commit -q -m 'Initial setup'
  $ touch newprog
  $ chmod +x newprog
  $ rm altname
  $ ln -s newprog altname
  $ chmod -x program
  $ bzr add -q newprog
  $ bzr commit -q -m 'Symlink changed, x bits changed'
  $ cd ..
  $ hg convert source source-hg
  initializing destination source-hg repository
  scanning source...
  sorting...
  converting...
  1 Initial setup
  0 Symlink changed, x bits changed
  $ manifest source-hg 0
  % manifest of 0
  644 @ altname
  644   d/a
  755 * program
  644 @ syma
  $ manifest source-hg tip
  % manifest of tip
  644 @ altname
  644   d/a
  755 * newprog
  644   program
  644 @ syma

test the symlinks can be recreated

  $ cd source-hg
  $ hg up
  5 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg cat syma; echo
  a
  $ cd ../..

#endif

Multiple branches

  $ bzr init-repo -q --no-trees repo
  $ bzr init -q repo/trunk
  $ bzr co repo/trunk repo-trunk
  $ cd repo-trunk
  $ echo a > a
  $ bzr add -q a
  $ bzr ci -qm adda
  $ bzr tag trunk-tag
  Created tag trunk-tag.
  $ bzr switch -b branch
  Tree is up to date at revision 1.
  Switched to branch: *repo/branch/ (glob)
  $ sleep 1
  $ echo b > b
  $ bzr add -q b
  $ bzr ci -qm addb
  $ bzr tag branch-tag
  Created tag branch-tag.
  $ bzr switch --force ../repo/trunk
  Updated to revision 1.
  Switched to branch: */repo/trunk/ (glob)
  $ sleep 1
  $ echo a >> a
  $ bzr ci -qm changea
  $ cd ..
  $ hg convert --datesort repo repo-bzr
  initializing destination repo-bzr repository
  scanning source...
  sorting...
  converting...
  2 adda
  1 addb
  0 changea
  updating tags
  $ (cd repo-bzr; glog)
  o  3@default "update tags" files: .hgtags
  |
  o  2@default "changea" files: a
  |
  | o  1@branch "addb" files: b
  |/
  o  0@default "adda" files: a
  

Test tags (converted identifiers are not stable because bzr ones are
not and get incorporated in extra fields).

  $ hg -R repo-bzr tags
  tip                                3:* (glob)
  branch-tag                         1:* (glob)
  trunk-tag                          0:* (glob)

Nested repositories (issue3254)

  $ bzr init-repo -q --no-trees repo/inner
  $ bzr init -q repo/inner/trunk
  $ bzr co repo/inner/trunk inner-trunk
  $ cd inner-trunk
  $ echo b > b
  $ bzr add -q b
  $ bzr ci -qm addb
  $ cd ..
  $ hg convert --datesort repo noinner-bzr
  initializing destination noinner-bzr repository
  scanning source...
  sorting...
  converting...
  2 adda
  1 addb
  0 changea
  updating tags