view tests/test-convert-p4.t @ 37295:45b39c69fae0

wireproto: separate commands tables for version 1 and 2 commands

We can't easily reuse existing command handlers for version 2
commands because the response types will be different. e.g. many
commands return nodes encoded as hex. Our new wire protocol is
binary safe, so we'll wish to encode nodes as binary.

We /could/ teach each command handler to look at the protocol
handler and change behavior based on the version in use. However,
this would make logic a bit unwieldy over time and would make
it harder to design a unified protocol handler interface. I think
it's better to create a clean break between version 1 and version 2
of commands on the server.

What I imagine happening is we will have separate @wireprotocommand
functions for each protocol generation. Those functions will parse the
request, dispatch to a common function to process it, then generate
the response in its own, transport-specific manner.

This commit establishes a separate table for tracking version 1
commands from version 2 commands. The HTTP server pieces have been
updated to use this new table.

Most commands are marked as both version 1 and version 2, so there is
little practical impact to this change.

A side-effect of this change is we now rely on transport registration
in wireprototypes.TRANSPORTS and certain properties of the protocol
interface. So a test had to be updated to conform.

Differential Revision: https://phab.mercurial-scm.org/D2982

#require p4

  $ echo "[extensions]" >> $HGRCPATH
  $ echo "convert = " >> $HGRCPATH

create p4 depot
  $ P4ROOT=`pwd`/depot; export P4ROOT
  $ P4AUDIT=$P4ROOT/audit; export P4AUDIT
  $ P4JOURNAL=$P4ROOT/journal; export P4JOURNAL
  $ P4LOG=$P4ROOT/log; export P4LOG
  $ P4PORT=localhost:$HGPORT; export P4PORT
  $ P4DEBUG=1; export P4DEBUG

start the p4 server
  $ [ ! -d $P4ROOT ] && mkdir $P4ROOT
  $ p4d -f -J off >$P4ROOT/stdout 2>$P4ROOT/stderr &
  $ echo $! >> $DAEMON_PIDS
  $ trap "echo stopping the p4 server ; p4 admin stop" EXIT

  $ # wait for the server to initialize
  $ while ! p4 ; do
  >    sleep 1
  > done >/dev/null 2>/dev/null

create a client spec
  $ P4CLIENT=hg-p4-import; export P4CLIENT
  $ DEPOTPATH=//depot/test-mercurial-import/...
  $ p4 client -o | sed '/^View:/,$ d' >p4client
  $ echo View: >>p4client
  $ echo " $DEPOTPATH //$P4CLIENT/..." >>p4client
  $ p4 client -i <p4client
  Client hg-p4-import saved.

populate the depot
  $ echo a > a
  $ mkdir b
  $ echo c > b/c
  $ p4 add a b/c
  //depot/test-mercurial-import/a#1 - opened for add
  //depot/test-mercurial-import/b/c#1 - opened for add
  $ p4 submit -d initial
  Submitting change 1.
  Locking 2 files ...
  add //depot/test-mercurial-import/a#1
  add //depot/test-mercurial-import/b/c#1
  Change 1 submitted.

change some files
  $ p4 edit a
  //depot/test-mercurial-import/a#1 - opened for edit
  $ echo aa >> a
  $ p4 submit -d "change a"
  Submitting change 2.
  Locking 1 files ...
  edit //depot/test-mercurial-import/a#2
  Change 2 submitted.

  $ p4 edit b/c
  //depot/test-mercurial-import/b/c#1 - opened for edit
  $ echo cc >> b/c
  $ p4 submit -d "change b/c"
  Submitting change 3.
  Locking 1 files ...
  edit //depot/test-mercurial-import/b/c#2
  Change 3 submitted.

convert
  $ hg convert -s p4 $DEPOTPATH dst
  initializing destination dst repository
  scanning source...
  reading p4 views
  collecting p4 changelists
  1 initial
  2 change a
  3 change b/c
  sorting...
  converting...
  2 initial
  1 change a
  0 change b/c
  $ hg -R dst log --template 'rev={rev} desc="{desc}" tags="{tags}" files="{files}"\n'
  rev=2 desc="change b/c" tags="tip" files="b/c"
  rev=1 desc="change a" tags="" files="a"
  rev=0 desc="initial" tags="" files="a b/c"

change some files
  $ p4 edit a b/c
  //depot/test-mercurial-import/a#2 - opened for edit
  //depot/test-mercurial-import/b/c#2 - opened for edit
  $ echo aaa >> a
  $ echo ccc >> b/c
  $ p4 submit -d "change a b/c"
  Submitting change 4.
  Locking 2 files ...
  edit //depot/test-mercurial-import/a#3
  edit //depot/test-mercurial-import/b/c#3
  Change 4 submitted.

convert again
  $ hg convert -s p4 $DEPOTPATH dst
  scanning source...
  reading p4 views
  collecting p4 changelists
  4 change a b/c
  sorting...
  converting...
  0 change a b/c
  $ hg -R dst log --template 'rev={rev} desc="{desc}" tags="{tags}" files="{files}"\n'
  rev=3 desc="change a b/c" tags="tip" files="a b/c"
  rev=2 desc="change b/c" tags="" files="b/c"
  rev=1 desc="change a" tags="" files="a"
  rev=0 desc="initial" tags="" files="a b/c"

interesting names
  $ echo dddd > "d d"
  $ mkdir " e"
  $ echo fff >" e/ f"
  $ p4 add "d d" " e/ f"
  //depot/test-mercurial-import/d d#1 - opened for add
  //depot/test-mercurial-import/ e/ f#1 - opened for add
  $ p4 submit -d "add d e f"
  Submitting change 5.
  Locking 2 files ...
  add //depot/test-mercurial-import/ e/ f#1
  add //depot/test-mercurial-import/d d#1
  Change 5 submitted.

convert again
  $ hg convert -s p4 $DEPOTPATH dst
  scanning source...
  reading p4 views
  collecting p4 changelists
  5 add d e f
  sorting...
  converting...
  0 add d e f
  $ hg -R dst log --template 'rev={rev} desc="{desc}" tags="{tags}" files="{files}"\n'
  rev=4 desc="add d e f" tags="tip" files=" e/ f d d"
  rev=3 desc="change a b/c" tags="" files="a b/c"
  rev=2 desc="change b/c" tags="" files="b/c"
  rev=1 desc="change a" tags="" files="a"
  rev=0 desc="initial" tags="" files="a b/c"

empty commit message
  $ p4 edit a
  //depot/test-mercurial-import/a#3 - opened for edit
  $ echo aaaaa >> a
  $ p4 submit -d ""
  Submitting change 6.
  Locking 1 files ...
  edit //depot/test-mercurial-import/a#4
  Change 6 submitted.
  $ hg convert -s p4 $DEPOTPATH dst
  scanning source...
  reading p4 views
  collecting p4 changelists
  6 **empty changelist description**
  sorting...
  converting...
  0 

exit trap:
  stopping the p4 server