view tests/test-convert-svn-sink.t @ 37295:45b39c69fae0

wireproto: separate commands tables for version 1 and 2 commands

We can't easily reuse existing command handlers for version 2
commands because the response types will be different. e.g. many
commands return nodes encoded as hex. Our new wire protocol is
binary safe, so we'll wish to encode nodes as binary.

We /could/ teach each command handler to look at the protocol
handler and change behavior based on the version in use. However,
this would make logic a bit unwieldy over time and would make
it harder to design a unified protocol handler interface. I think
it's better to create a clean break between version 1 and version 2
of commands on the server.

What I imagine happening is we will have separate @wireprotocommand
functions for each protocol generation. Those functions will parse the
request, dispatch to a common function to process it, then generate
the response in its own, transport-specific manner.

This commit establishes a separate table for tracking version 1
commands from version 2 commands. The HTTP server pieces have been
updated to use this new table.

Most commands are marked as both version 1 and version 2, so there is
little practical impact to this change.

A side-effect of this change is we now rely on transport registration
in wireprototypes.TRANSPORTS and certain properties of the protocol
interface. So a test had to be updated to conform.

Differential Revision: https://phab.mercurial-scm.org/D2982

#require svn13

  $ svnupanddisplay()
  > {
  >     (
  >        cd $1;
  >        svn up -q;
  >        svn st -v | sed 's/  */ /g' | sort
  >        limit=''
  >        if [ $2 -gt 0 ]; then
  >            limit="--limit=$2"
  >        fi
  >        svn log --xml -v $limit | $PYTHON "$TESTDIR/svnxml.py"
  >     )
  > }

  $ cat >> $HGRCPATH <<EOF
  > [extensions]
  > convert =
  > EOF

  $ hg init a

Add

  $ echo a > a/a
  $ mkdir -p a/d1/d2
  $ echo b > a/d1/d2/b
  $ hg --cwd a ci -d '0 0' -A -m 'add a file'
  adding a
  adding d1/d2/b

Modify

  $ svn-safe-append.py a a/a
  $ hg --cwd a ci -d '1 0' -m 'modify a file'
  $ hg --cwd a tip -q
  1:e0e2b8a9156b

  $ hg convert -d svn a
  assuming destination a-hg
  initializing svn repository 'a-hg'
  initializing svn working copy 'a-hg-wc'
  scanning source...
  sorting...
  converting...
  1 add a file
  0 modify a file
  $ svnupanddisplay a-hg-wc 2
   2 1 test d1
   2 1 test d1/d2
   2 1 test d1/d2/b
   2 2 test .
   2 2 test a
  revision: 2
  author: test
  msg: modify a file
   M /a
  revision: 1
  author: test
  msg: add a file
   A /a
   A /d1
   A /d1/d2
   A /d1/d2/b
  $ ls a a-hg-wc
  a:
  a
  d1
  
  a-hg-wc:
  a
  d1
  $ cmp a/a a-hg-wc/a

Rename

  $ hg --cwd a mv a b
  $ hg --cwd a ci -d '2 0' -m 'rename a file'
  $ hg --cwd a tip -q
  2:eb5169441d43

  $ hg convert -d svn a
  assuming destination a-hg
  initializing svn working copy 'a-hg-wc'
  scanning source...
  sorting...
  converting...
  0 rename a file
  $ svnupanddisplay a-hg-wc 1
   3 1 test d1
   3 1 test d1/d2
   3 1 test d1/d2/b
   3 3 test .
   3 3 test b
  revision: 3
  author: test
  msg: rename a file
   D /a
   A /b (from /a@2)
  $ ls a a-hg-wc
  a:
  b
  d1
  
  a-hg-wc:
  b
  d1

Copy

  $ hg --cwd a cp b c

  $ hg --cwd a ci -d '3 0' -m 'copy a file'
  $ hg --cwd a tip -q
  3:60effef6ab48

  $ hg convert -d svn a
  assuming destination a-hg
  initializing svn working copy 'a-hg-wc'
  scanning source...
  sorting...
  converting...
  0 copy a file
  $ svnupanddisplay a-hg-wc 1
   4 1 test d1
   4 1 test d1/d2
   4 1 test d1/d2/b
   4 3 test b
   4 4 test .
   4 4 test c
  revision: 4
  author: test
  msg: copy a file
   A /c (from /b@3)
  $ ls a a-hg-wc
  a:
  b
  c
  d1
  
  a-hg-wc:
  b
  c
  d1

  $ hg --cwd a rm b

Remove

  $ hg --cwd a ci -d '4 0' -m 'remove a file'
  $ hg --cwd a tip -q
  4:87bbe3013fb6

  $ hg convert -d svn a
  assuming destination a-hg
  initializing svn working copy 'a-hg-wc'
  scanning source...
  sorting...
  converting...
  0 remove a file
  $ svnupanddisplay a-hg-wc 1
   5 1 test d1
   5 1 test d1/d2
   5 1 test d1/d2/b
   5 4 test c
   5 5 test .
  revision: 5
  author: test
  msg: remove a file
   D /b
  $ ls a a-hg-wc
  a:
  c
  d1
  
  a-hg-wc:
  c
  d1

Executable

#if execbit
  $ chmod +x a/c
#else
  $ echo fake >> a/c
#endif
  $ hg --cwd a ci -d '5 0' -m 'make a file executable'
#if execbit
  $ hg --cwd a tip -q
  5:ff42e473c340
#else
  $ hg --cwd a tip -q
  5:817a700c8cf1
#endif

  $ hg convert -d svn a
  assuming destination a-hg
  initializing svn working copy 'a-hg-wc'
  scanning source...
  sorting...
  converting...
  0 make a file executable
  $ svnupanddisplay a-hg-wc 1
   6 1 test d1
   6 1 test d1/d2
   6 1 test d1/d2/b
   6 6 test .
   6 6 test c
  revision: 6
  author: test
  msg: make a file executable
   M /c
#if execbit
  $ test -x a-hg-wc/c
#endif

#if symlink

Symlinks

  $ ln -s a/missing a/link
  $ hg --cwd a commit -Am 'add symlink'
  adding link
  $ hg --cwd a mv link newlink
  $ hg --cwd a commit -m 'move symlink'
  $ hg convert -d svn a a-svnlink
  initializing svn repository 'a-svnlink'
  initializing svn working copy 'a-svnlink-wc'
  scanning source...
  sorting...
  converting...
  7 add a file
  6 modify a file
  5 rename a file
  4 copy a file
  3 remove a file
  2 make a file executable
  1 add symlink
  0 move symlink
  $ svnupanddisplay a-svnlink-wc 1
   8 1 test d1
   8 1 test d1/d2
   8 1 test d1/d2/b
   8 6 test c
   8 8 test .
   8 8 test newlink
  revision: 8
  author: test
  msg: move symlink
   D /link
   A /newlink (from /link@7)

Make sure our changes don't affect the rest of the test cases

  $ hg --cwd a up 5
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ hg --cwd a --config extensions.strip= strip -r 6
  saved backup bundle to $TESTTMP/a/.hg/strip-backup/bd4f7b7a7067-ed505e42-backup.hg

#endif

Convert with --full adds and removes files that didn't change

  $ touch a/f
  $ hg -R a ci -Aqmf
  $ echo "rename c d" > filemap
  $ hg convert -d svn a --filemap filemap --full
  assuming destination a-hg
  initializing svn working copy 'a-hg-wc'
  scanning source...
  sorting...
  converting...
  0 f
  $ svnupanddisplay a-hg-wc 1
   7 7 test .
   7 7 test d
   7 7 test f
  revision: 7
  author: test
  msg: f
   D /c
   A /d
   D /d1
   A /f

  $ rm -rf a a-hg a-hg-wc


Executable in new directory

  $ hg init a

  $ mkdir a/d1
  $ echo a > a/d1/a
#if execbit
  $ chmod +x a/d1/a
#else
  $ echo fake >> a/d1/a
#endif
  $ hg --cwd a ci -d '0 0' -A -m 'add executable file in new directory'
  adding d1/a

  $ hg convert -d svn a
  assuming destination a-hg
  initializing svn repository 'a-hg'
  initializing svn working copy 'a-hg-wc'
  scanning source...
  sorting...
  converting...
  0 add executable file in new directory
  $ svnupanddisplay a-hg-wc 1
   1 1 test .
   1 1 test d1
   1 1 test d1/a
  revision: 1
  author: test
  msg: add executable file in new directory
   A /d1
   A /d1/a
#if execbit
  $ test -x a-hg-wc/d1/a
#endif

Copy to new directory

  $ mkdir a/d2
  $ hg --cwd a cp d1/a d2/a
  $ hg --cwd a ci -d '1 0' -A -m 'copy file to new directory'

  $ hg convert -d svn a
  assuming destination a-hg
  initializing svn working copy 'a-hg-wc'
  scanning source...
  sorting...
  converting...
  0 copy file to new directory
  $ svnupanddisplay a-hg-wc 1
   2 1 test d1
   2 1 test d1/a
   2 2 test .
   2 2 test d2
   2 2 test d2/a
  revision: 2
  author: test
  msg: copy file to new directory
   A /d2
   A /d2/a (from /d1/a@1)

Branchy history

  $ hg init b
  $ echo base > b/b
  $ hg --cwd b ci -d '0 0' -Ambase
  adding b

  $ svn-safe-append.py left-1 b/b
  $ echo left-1 > b/left-1
  $ hg --cwd b ci -d '1 0' -Amleft-1
  adding left-1

  $ svn-safe-append.py left-2 b/b
  $ echo left-2 > b/left-2
  $ hg --cwd b ci -d '2 0' -Amleft-2
  adding left-2

  $ hg --cwd b up 0
  1 files updated, 0 files merged, 2 files removed, 0 files unresolved

  $ svn-safe-append.py right-1 b/b
  $ echo right-1 > b/right-1
  $ hg --cwd b ci -d '3 0' -Amright-1
  adding right-1
  created new head

  $ svn-safe-append.py right-2 b/b
  $ echo right-2 > b/right-2
  $ hg --cwd b ci -d '4 0' -Amright-2
  adding right-2

  $ hg --cwd b up -C 2
  3 files updated, 0 files merged, 2 files removed, 0 files unresolved
  $ hg --cwd b merge
  merging b
  warning: conflicts while merging b! (edit, then use 'hg resolve --mark')
  2 files updated, 0 files merged, 0 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg merge --abort' to abandon
  [1]
  $ hg --cwd b revert -r 2 b
  $ hg --cwd b resolve -m b
  (no more unresolved files)
  $ hg --cwd b ci -d '5 0' -m 'merge'

Expect 4 changes

  $ hg convert -d svn b
  assuming destination b-hg
  initializing svn repository 'b-hg'
  initializing svn working copy 'b-hg-wc'
  scanning source...
  sorting...
  converting...
  5 base
  4 left-1
  3 left-2
  2 right-1
  1 right-2
  0 merge

  $ svnupanddisplay b-hg-wc 0
   4 2 test left-1
   4 3 test b
   4 3 test left-2
   4 4 test .
   4 4 test right-1
   4 4 test right-2
  revision: 4
  author: test
  msg: merge
   A /right-1
   A /right-2
  revision: 3
  author: test
  msg: left-2
   M /b
   A /left-2
  revision: 2
  author: test
  msg: left-1
   M /b
   A /left-1
  revision: 1
  author: test
  msg: base
   A /b

Tags are not supported, but must not break conversion

  $ rm -rf a a-hg a-hg-wc
  $ hg init a
  $ echo a > a/a
  $ hg --cwd a ci -d '0 0' -A -m 'Add file a'
  adding a
  $ hg --cwd a tag -d '1 0' -m 'Tagged as v1.0' v1.0

  $ hg convert -d svn a
  assuming destination a-hg
  initializing svn repository 'a-hg'
  initializing svn working copy 'a-hg-wc'
  scanning source...
  sorting...
  converting...
  1 Add file a
  0 Tagged as v1.0
  writing Subversion tags is not yet implemented
  $ svnupanddisplay a-hg-wc 2
   2 1 test a
   2 2 test .
   2 2 test .hgtags
  revision: 2
  author: test
  msg: Tagged as v1.0
   A /.hgtags
  revision: 1
  author: test
  msg: Add file a
   A /a
  $ rm -rf a a-hg a-hg-wc