view tests/test-dirstate-race.t @ 37295:45b39c69fae0

wireproto: separate commands tables for version 1 and 2 commands

We can't easily reuse existing command handlers for version 2
commands because the response types will be different. e.g. many
commands return nodes encoded as hex. Our new wire protocol is
binary safe, so we'll wish to encode nodes as binary.

We /could/ teach each command handler to look at the protocol
handler and change behavior based on the version in use. However,
this would make logic a bit unwieldy over time and would make
it harder to design a unified protocol handler interface. I think
it's better to create a clean break between version 1 and version 2
of commands on the server.

What I imagine happening is we will have separate @wireprotocommand
functions for each protocol generation. Those functions will parse the
request, dispatch to a common function to process it, then generate
the response in its own, transport-specific manner.

This commit establishes a separate table for tracking version 1
commands from version 2 commands. The HTTP server pieces have been
updated to use this new table.

Most commands are marked as both version 1 and version 2, so there is
little practical impact to this change.

A side-effect of this change is we now rely on transport registration
in wireprototypes.TRANSPORTS and certain properties of the protocol
interface. So a test had to be updated to conform.

Differential Revision: https://phab.mercurial-scm.org/D2982

  $ hg init repo
  $ cd repo
  $ echo a > a
  $ hg add a
  $ hg commit -m test

Do we ever miss a sub-second change?:

  $ for i in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20; do
  >     hg co -qC 0
  >     echo b > a
  >     hg st
  > done
  M a
  M a
  M a
  M a
  M a
  M a
  M a
  M a
  M a
  M a
  M a
  M a
  M a
  M a
  M a
  M a
  M a
  M a
  M a
  M a

  $ echo test > b
  $ mkdir dir1
  $ echo test > dir1/c
  $ echo test > d

  $ echo test > e
#if execbit
A directory will typically have the execute bit -- make sure it doesn't get
confused with a file with the exec bit set
  $ chmod +x e
#endif

  $ hg add b dir1 d e
  adding dir1/c
  $ hg commit -m test2

  $ cat >> $TESTTMP/dirstaterace.py << EOF
  > from mercurial import (
  >     context,
  >     extensions,
  > )
  > def extsetup():
  >     extensions.wrapfunction(context.workingctx, '_checklookup', overridechecklookup)
  > def overridechecklookup(orig, self, files):
  >     # make an update that changes the dirstate from underneath
  >     self._repo.ui.system(r"sh '$TESTTMP/dirstaterace.sh'",
  >                          cwd=self._repo.root)
  >     return orig(self, files)
  > EOF

  $ hg debugrebuilddirstate
  $ hg debugdirstate
  n   0         -1 unset               a
  n   0         -1 unset               b
  n   0         -1 unset               d
  n   0         -1 unset               dir1/c
  n   0         -1 unset               e

XXX Note that this returns M for files that got replaced by directories. This is
definitely a bug, but the fix for that is hard and the next status run is fine
anyway.

  $ cat > $TESTTMP/dirstaterace.sh <<EOF
  > rm b && rm -r dir1 && rm d && mkdir d && rm e && mkdir e
  > EOF

  $ hg status --config extensions.dirstaterace=$TESTTMP/dirstaterace.py
  M d
  M e
  ! b
  ! dir1/c
  $ hg debugdirstate
  n 644          2 * a (glob)
  n   0         -1 unset               b
  n   0         -1 unset               d
  n   0         -1 unset               dir1/c
  n   0         -1 unset               e

  $ hg status
  ! b
  ! d
  ! dir1/c
  ! e

  $ rmdir d e
  $ hg update -C -q .

Test that dirstate changes aren't written out at the end of "hg
status", if .hg/dirstate is already changed simultaneously before
acquisition of wlock in workingctx._poststatusfixup().

This avoidance is important to keep consistency of dirstate in race
condition (see issue5584 for detail).

  $ hg parents -q
  1:* (glob)

  $ hg debugrebuilddirstate
  $ hg debugdirstate
  n   0         -1 unset               a
  n   0         -1 unset               b
  n   0         -1 unset               d
  n   0         -1 unset               dir1/c
  n   0         -1 unset               e

  $ cat > $TESTTMP/dirstaterace.sh <<EOF
  > # This script assumes timetable of typical issue5584 case below:
  > #
  > # 1. "hg status" loads .hg/dirstate
  > # 2. "hg status" confirms clean-ness of FILE
  > # 3. "hg update -C 0" updates the working directory simultaneously
  > #    (FILE is removed, and FILE is dropped from .hg/dirstate)
  > # 4. "hg status" acquires wlock
  > #    (.hg/dirstate is re-loaded = no FILE entry in dirstate)
  > # 5. "hg status" marks FILE in dirstate as clean
  > #    (FILE entry is added to in-memory dirstate)
  > # 6. "hg status" writes dirstate changes into .hg/dirstate
  > #    (FILE entry is written into .hg/dirstate)
  > #
  > # To reproduce similar situation easily and certainly, #2 and #3
  > # are swapped.  "hg cat" below ensures #2 on "hg status" side.
  > 
  > hg update -q -C 0
  > hg cat -r 1 b > b
  > EOF

"hg status" below should excludes "e", of which exec flag is set, for
portability of test scenario, because unsure but missing "e" is
treated differently in _checklookup() according to runtime platform.

- "missing(!)" on POSIX, "pctx[f].cmp(self[f])" raises ENOENT
- "modified(M)" on Windows, "self.flags(f) != pctx.flags(f)" is True

  $ hg status --config extensions.dirstaterace=$TESTTMP/dirstaterace.py --debug -X path:e
  skip updating dirstate: identity mismatch
  M a
  ! d
  ! dir1/c

  $ hg parents -q
  0:* (glob)
  $ hg files
  a
  $ hg debugdirstate
  n * * * a (glob)

  $ rm b

#if fsmonitor

Create fsmonitor state.

  $ hg status
  $ f --type .hg/fsmonitor.state
  .hg/fsmonitor.state: file

Test that invalidating fsmonitor state in the middle (which doesn't require the
wlock) causes the fsmonitor update to be skipped.
hg debugrebuilddirstate ensures that the dirstaterace hook will be called, but
it also invalidates the fsmonitor state. So back it up and restore it.

  $ mv .hg/fsmonitor.state .hg/fsmonitor.state.tmp
  $ hg debugrebuilddirstate
  $ mv .hg/fsmonitor.state.tmp .hg/fsmonitor.state

  $ cat > $TESTTMP/dirstaterace.sh <<EOF
  > rm .hg/fsmonitor.state
  > EOF

  $ hg status --config extensions.dirstaterace=$TESTTMP/dirstaterace.py --debug
  skip updating fsmonitor.state: identity mismatch
  $ f .hg/fsmonitor.state
  .hg/fsmonitor.state: file not found

#endif

Set up a rebase situation for issue5581.

  $ echo c2 > a
  $ echo c2 > b
  $ hg add b
  $ hg commit -m c2
  created new head
  $ echo c3 >> a
  $ hg commit -m c3
  $ hg update 2
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo c4 >> a
  $ echo c4 >> b
  $ hg commit -m c4
  created new head

Configure a merge tool that runs status in the middle of the rebase. The goal of
the status call is to trigger a potential bug if fsmonitor's state is written
even though the wlock is held by another process. The output of 'hg status' in
the merge tool goes to /dev/null because we're more interested in the results of
'hg status' run after the rebase.

  $ cat >> $TESTTMP/mergetool-race.sh << EOF
  > echo "custom merge tool"
  > printf "c2\nc3\nc4\n" > \$1
  > hg --cwd "$TESTTMP/repo" status > /dev/null
  > echo "custom merge tool end"
  > EOF
  $ cat >> $HGRCPATH << EOF
  > [extensions]
  > rebase =
  > [merge-tools]
  > test.executable=sh
  > test.args=$TESTTMP/mergetool-race.sh \$output
  > EOF

  $ hg rebase -s . -d 3 --tool test
  rebasing 4:b08445fd6b2a "c4" (tip)
  merging a
  custom merge tool
  custom merge tool end
  saved backup bundle to $TESTTMP/repo/.hg/strip-backup/* (glob)

This hg status should be empty, whether or not fsmonitor is enabled (issue5581).

  $ hg status