view tests/test-fetch.t @ 37295:45b39c69fae0

wireproto: separate commands tables for version 1 and 2 commands

We can't easily reuse existing command handlers for version 2
commands because the response types will be different. e.g. many
commands return nodes encoded as hex. Our new wire protocol is
binary safe, so we'll wish to encode nodes as binary.

We /could/ teach each command handler to look at the protocol
handler and change behavior based on the version in use. However,
this would make logic a bit unwieldy over time and would make
it harder to design a unified protocol handler interface. I think
it's better to create a clean break between version 1 and version 2
of commands on the server.

What I imagine happening is we will have separate @wireprotocommand
functions for each protocol generation. Those functions will parse the
request, dispatch to a common function to process it, then generate
the response in its own, transport-specific manner.

This commit establishes a separate table for tracking version 1
commands from version 2 commands. The HTTP server pieces have been
updated to use this new table.

Most commands are marked as both version 1 and version 2, so there is
little practical impact to this change.

A side-effect of this change is we now rely on transport registration
in wireprototypes.TRANSPORTS and certain properties of the protocol
interface. So a test had to be updated to conform.

Differential Revision: https://phab.mercurial-scm.org/D2982

#require serve

  $ echo "[extensions]" >> $HGRCPATH
  $ echo "fetch=" >> $HGRCPATH

test fetch with default branches only

  $ hg init a
  $ echo a > a/a
  $ hg --cwd a commit -Ama
  adding a
  $ hg clone a b
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg clone a c
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo b > a/b
  $ hg --cwd a commit -Amb
  adding b
  $ hg --cwd a parents -q
  1:d2ae7f538514

should pull one change

  $ hg --cwd b fetch ../a
  pulling from ../a
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  new changesets d2ae7f538514
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg --cwd b parents -q
  1:d2ae7f538514
  $ echo c > c/c
  $ hg --cwd c commit -Amc
  adding c
  $ hg clone c d
  updating to branch default
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg clone c e
  updating to branch default
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved

We cannot use the default commit message if fetching from a local
repo, because the path of the repo will be included in the commit
message, making every commit appear different.
should merge c into a

  $ hg --cwd c fetch -d '0 0' -m 'automated merge' ../a
  pulling from ../a
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (+1 heads)
  new changesets d2ae7f538514
  updating to 2:d2ae7f538514
  1 files updated, 0 files merged, 1 files removed, 0 files unresolved
  merging with 1:d36c0562f908
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  new changeset 3:a323a0c43ec4 merges remote changes with local
  $ ls c
  a
  b
  c
  $ hg serve --cwd a -a localhost -p $HGPORT -d --pid-file=hg.pid
  $ cat a/hg.pid >> "$DAEMON_PIDS"

fetch over http, no auth
(this also tests that editor is invoked if '--edit' is specified)

  $ HGEDITOR=cat hg --cwd d fetch --edit http://localhost:$HGPORT/
  pulling from http://localhost:$HGPORT/
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (+1 heads)
  new changesets d2ae7f538514
  updating to 2:d2ae7f538514
  1 files updated, 0 files merged, 1 files removed, 0 files unresolved
  merging with 1:d36c0562f908
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  Automated merge with http://localhost:$HGPORT/
  
  
  HG: Enter commit message.  Lines beginning with 'HG:' are removed.
  HG: Leave message empty to abort commit.
  HG: --
  HG: user: test
  HG: branch merge
  HG: branch 'default'
  HG: changed c
  new changeset 3:* merges remote changes with local (glob)
  $ hg --cwd d tip --template '{desc}\n'
  Automated merge with http://localhost:$HGPORT/
  $ hg --cwd d status --rev 'tip^1' --rev tip
  A c
  $ hg --cwd d status --rev 'tip^2' --rev tip
  A b

fetch over http with auth (should be hidden in desc)
(this also tests that editor is not invoked if '--edit' is not
specified, even though commit message is not specified explicitly)

  $ HGEDITOR=cat hg --cwd e fetch http://user:password@localhost:$HGPORT/
  pulling from http://user:***@localhost:$HGPORT/
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (+1 heads)
  new changesets d2ae7f538514
  updating to 2:d2ae7f538514
  1 files updated, 0 files merged, 1 files removed, 0 files unresolved
  merging with 1:d36c0562f908
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  new changeset 3:* merges remote changes with local (glob)
  $ hg --cwd e tip --template '{desc}\n'
  Automated merge with http://localhost:$HGPORT/
  $ hg clone a f
  updating to branch default
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg clone a g
  updating to branch default
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo f > f/f
  $ hg --cwd f ci -Amf
  adding f
  $ echo g > g/g
  $ hg --cwd g ci -Amg
  adding g
  $ hg clone -q f h
  $ hg clone -q g i

should merge f into g

  $ hg --cwd g fetch -d '0 0' --switch -m 'automated merge' ../f
  pulling from ../f
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (+1 heads)
  new changesets 6343ca3eff20
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
  merging with 3:6343ca3eff20
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  new changeset 4:f7faa0b7d3c6 merges remote changes with local
  $ rm i/g

should abort, because i is modified

  $ hg --cwd i fetch ../h
  abort: uncommitted changes
  [255]

test fetch with named branches

  $ hg init nbase
  $ echo base > nbase/a
  $ hg -R nbase ci -Am base
  adding a
  $ hg -R nbase branch a
  marked working directory as branch a
  (branches are permanent and global, did you want a bookmark?)
  $ echo a > nbase/a
  $ hg -R nbase ci -m a
  $ hg -R nbase up -C 0
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg -R nbase branch b
  marked working directory as branch b
  $ echo b > nbase/b
  $ hg -R nbase ci -Am b
  adding b

pull in change on foreign branch

  $ hg clone nbase n1
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg clone nbase n2
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg -R n1 up -C a
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo aa > n1/a
  $ hg -R n1 ci -m a1
  $ hg -R n2 up -C b
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg -R n2 fetch -m 'merge' n1
  pulling from n1
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  new changesets 8fdc9284bbc5

parent should be 2 (no automatic update)

  $ hg -R n2 parents --template '{rev}\n'
  2
  $ rm -fr n1 n2

pull in changes on both foreign and local branches

  $ hg clone nbase n1
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg clone nbase n2
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg -R n1 up -C a
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo aa > n1/a
  $ hg -R n1 ci -m a1
  $ hg -R n1 up -C b
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo bb > n1/b
  $ hg -R n1 ci -m b1
  $ hg -R n2 up -C b
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg -R n2 fetch -m 'merge' n1
  pulling from n1
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 2 files
  new changesets 8fdc9284bbc5:3c4a837a864f
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

parent should be 4 (fast forward)

  $ hg -R n2 parents --template '{rev}\n'
  4
  $ rm -fr n1 n2

pull changes on foreign (2 new heads) and local (1 new head) branches
with a local change

  $ hg clone nbase n1
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg clone nbase n2
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg -R n1 up -C a
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo a1 > n1/a
  $ hg -R n1 ci -m a1
  $ hg -R n1 up -C b
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo bb > n1/b
  $ hg -R n1 ci -m b1
  $ hg -R n1 up -C 1
  1 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ echo a2 > n1/a
  $ hg -R n1 ci -m a2
  created new head
  $ hg -R n2 up -C b
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo change >> n2/c
  $ hg -R n2 ci -A -m local
  adding c
  $ hg -R n2 fetch -d '0 0' -m 'merge' n1
  pulling from n1
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 3 changesets with 3 changes to 2 files (+2 heads)
  new changesets d05ce59ff88d:a7954de24e4c
  updating to 5:3c4a837a864f
  1 files updated, 0 files merged, 1 files removed, 0 files unresolved
  merging with 3:1267f84a9ea5
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  new changeset 7:2cf2a1261f21 merges remote changes with local

parent should be 7 (new merge changeset)

  $ hg -R n2 parents --template '{rev}\n'
  7
  $ rm -fr n1 n2

pull in changes on foreign (merge of local branch) and local (2 new
heads) with a local change

  $ hg clone nbase n1
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg clone nbase n2
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg -R n1 up -C a
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg -R n1 merge b
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg -R n1 ci -m merge
  $ hg -R n1 up -C 2
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo c > n1/a
  $ hg -R n1 ci -m c
  $ hg -R n1 up -C 2
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo cc > n1/a
  $ hg -R n1 ci -m cc
  created new head
  $ hg -R n2 up -C b
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo change >> n2/b
  $ hg -R n2 ci -A -m local
  $ hg -R n2 fetch -m 'merge' n1
  pulling from n1
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 3 changesets with 2 changes to 1 files (+2 heads)
  new changesets b84e8d0f020f:3d3bf54f99c0
  not merging with 1 other new branch heads (use "hg heads ." and "hg merge" to merge them)
  [1]

parent should be 3 (fetch did not merge anything)

  $ hg -R n2 parents --template '{rev}\n'
  3
  $ rm -fr n1 n2

pull in change on different branch than dirstate

  $ hg init n1
  $ echo a > n1/a
  $ hg -R n1 ci -Am initial
  adding a
  $ hg clone n1 n2
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo b > n1/a
  $ hg -R n1 ci -m next
  $ hg -R n2 branch topic
  marked working directory as branch topic
  (branches are permanent and global, did you want a bookmark?)
  $ hg -R n2 fetch -m merge n1
  abort: working directory not at branch tip
  (use 'hg update' to check out branch tip)
  [255]

parent should be 0 (fetch did not update or merge anything)

  $ hg -R n2 parents --template '{rev}\n'
  0
  $ rm -fr n1 n2

test fetch with inactive branches

  $ hg init ib1
  $ echo a > ib1/a
  $ hg --cwd ib1 ci -Am base
  adding a
  $ hg --cwd ib1 branch second
  marked working directory as branch second
  (branches are permanent and global, did you want a bookmark?)
  $ echo b > ib1/b
  $ hg --cwd ib1 ci -Am onsecond
  adding b
  $ hg --cwd ib1 branch -f default
  marked working directory as branch default
  $ echo c > ib1/c
  $ hg --cwd ib1 ci -Am newdefault
  adding c
  created new head
  $ hg clone ib1 ib2
  updating to branch default
  3 files updated, 0 files merged, 0 files removed, 0 files unresolved

fetch should succeed

  $ hg --cwd ib2 fetch ../ib1
  pulling from ../ib1
  searching for changes
  no changes found
  $ rm -fr ib1 ib2

test issue1726

  $ hg init i1726r1
  $ echo a > i1726r1/a
  $ hg --cwd i1726r1 ci -Am base
  adding a
  $ hg clone i1726r1 i1726r2
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo b > i1726r1/a
  $ hg --cwd i1726r1 ci -m second
  $ echo c > i1726r2/a
  $ hg --cwd i1726r2 ci -m third
  $ HGMERGE=true hg --cwd i1726r2 fetch ../i1726r1
  pulling from ../i1726r1
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (+1 heads)
  new changesets 7837755a2789
  updating to 2:7837755a2789
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  merging with 1:d1f0c6c48ebd
  merging a
  0 files updated, 1 files merged, 0 files removed, 0 files unresolved
  new changeset 3:* merges remote changes with local (glob)
  $ hg --cwd i1726r2 heads default --template '{rev}\n'
  3

test issue2047

  $ hg -q init i2047a
  $ cd i2047a
  $ echo a > a
  $ hg -q ci -Am a
  $ hg -q branch stable
  $ echo b > b
  $ hg -q ci -Am b
  $ cd ..
  $ hg -q clone -r 0 i2047a i2047b
  $ cd i2047b
  $ hg fetch ../i2047a
  pulling from ../i2047a
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  new changesets c8735224de5c

  $ cd ..