wireproto: separate commands tables for version 1 and 2 commands
We can't easily reuse existing command handlers for version 2
commands because the response types will be different. e.g. many
commands return nodes encoded as hex. Our new wire protocol is
binary safe, so we'll wish to encode nodes as binary.
We /could/ teach each command handler to look at the protocol
handler and change behavior based on the version in use. However,
this would make logic a bit unwieldy over time and would make
it harder to design a unified protocol handler interface. I think
it's better to create a clean break between version 1 and version 2
of commands on the server.
What I imagine happening is we will have separate @wireprotocommand
functions for each protocol generation. Those functions will parse the
request, dispatch to a common function to process it, then generate
the response in its own, transport-specific manner.
This commit establishes a separate table for tracking version 1
commands from version 2 commands. The HTTP server pieces have been
updated to use this new table.
Most commands are marked as both version 1 and version 2, so there is
little practical impact to this change.
A side-effect of this change is we now rely on transport registration
in wireprototypes.TRANSPORTS and certain properties of the protocol
interface. So a test had to be updated to conform.
Differential Revision: https://phab.mercurial-scm.org/D2982
Tests for the fix extension's behavior around non-trivial history topologies.
Looks for correct incremental fixing and reproduction of parent/child
relationships. We indicate fixed file content by uppercasing it.
$ cat >> $HGRCPATH <<EOF
> [extensions]
> fix =
> [fix]
> uppercase-whole-file:command=sed -e 's/.*/\U&/'
> uppercase-whole-file:fileset=set:**
> EOF
This tests the only behavior that should really be affected by obsolescence, so
we'll test it with evolution off and on. This only changes the revision
numbers, if all is well.
#testcases obsstore-off obsstore-on
#if obsstore-on
$ cat >> $HGRCPATH <<EOF
> [experimental]
> evolution.createmarkers=True
> evolution.allowunstable=True
> EOF
#endif
Setting up the test topology. Scroll down to see the graph produced. We make it
clear which files were modified in each revision. It's enough to test at the
file granularity, because that demonstrates which baserevs were diffed against.
The computation of changed lines is orthogonal and tested separately.
$ hg init repo
$ cd repo
$ printf "aaaa\n" > a
$ hg commit -Am "change A"
adding a
$ printf "bbbb\n" > b
$ hg commit -Am "change B"
adding b
$ printf "cccc\n" > c
$ hg commit -Am "change C"
adding c
$ hg checkout 0
0 files updated, 0 files merged, 2 files removed, 0 files unresolved
$ printf "dddd\n" > d
$ hg commit -Am "change D"
adding d
created new head
$ hg merge -r 2
2 files updated, 0 files merged, 0 files removed, 0 files unresolved
(branch merge, don't forget to commit)
$ printf "eeee\n" > e
$ hg commit -Am "change E"
adding e
$ hg checkout 0
0 files updated, 0 files merged, 4 files removed, 0 files unresolved
$ printf "ffff\n" > f
$ hg commit -Am "change F"
adding f
created new head
$ hg checkout 0
0 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ printf "gggg\n" > g
$ hg commit -Am "change G"
adding g
created new head
$ hg merge -r 5
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
(branch merge, don't forget to commit)
$ printf "hhhh\n" > h
$ hg commit -Am "change H"
adding h
$ hg merge -r 4
4 files updated, 0 files merged, 0 files removed, 0 files unresolved
(branch merge, don't forget to commit)
$ printf "iiii\n" > i
$ hg commit -Am "change I"
adding i
$ hg checkout 2
0 files updated, 0 files merged, 6 files removed, 0 files unresolved
$ printf "jjjj\n" > j
$ hg commit -Am "change J"
adding j
created new head
$ hg checkout 7
3 files updated, 0 files merged, 3 files removed, 0 files unresolved
$ printf "kkkk\n" > k
$ hg add
adding k
$ hg log --graph --template '{rev} {desc}\n'
o 9 change J
|
| o 8 change I
| |\
| | @ 7 change H
| | |\
| | | o 6 change G
| | | |
| | o | 5 change F
| | |/
| o | 4 change E
|/| |
| o | 3 change D
| |/
o | 2 change C
| |
o | 1 change B
|/
o 0 change A
Fix all but the root revision and its four children.
#if obsstore-on
$ hg fix -r '2|4|7|8|9' --working-dir
#else
$ hg fix -r '2|4|7|8|9' --working-dir
saved backup bundle to * (glob)
#endif
The five revisions remain, but the other revisions were fixed and replaced. All
parent pointers have been accurately set to reproduce the previous topology
(though it is rendered in a slightly different order now).
#if obsstore-on
$ hg log --graph --template '{rev} {desc}\n'
o 14 change J
|
| o 13 change I
| |\
| | @ 12 change H
| | |\
| o | | 11 change E
|/| | |
o | | | 10 change C
| | | |
| | | o 6 change G
| | | |
| | o | 5 change F
| | |/
| o / 3 change D
| |/
o / 1 change B
|/
o 0 change A
$ C=10
$ E=11
$ H=12
$ I=13
$ J=14
#else
$ hg log --graph --template '{rev} {desc}\n'
o 9 change J
|
| o 8 change I
| |\
| | @ 7 change H
| | |\
| o | | 6 change E
|/| | |
o | | | 5 change C
| | | |
| | | o 4 change G
| | | |
| | o | 3 change F
| | |/
| o / 2 change D
| |/
o / 1 change B
|/
o 0 change A
$ C=5
$ E=6
$ H=7
$ I=8
$ J=9
#endif
Change C is a root of the set being fixed, so all we fix is what has changed
since its parent. That parent, change B, is its baserev.
$ hg cat -r $C 'set:**'
aaaa
bbbb
CCCC
Change E is a merge with only one parent being fixed. Its baserevs are the
unfixed parent plus the baserevs of the other parent. This evaluates to changes
B and D. We now have to decide what it means to incrementally fix a merge
commit. We choose to fix anything that has changed versus any baserev. Only the
undisturbed content of the common ancestor, change A, is unfixed.
$ hg cat -r $E 'set:**'
aaaa
BBBB
CCCC
DDDD
EEEE
Change H is a merge with neither parent being fixed. This is essentially
equivalent to the previous case because there is still only one baserev for
each parent of the merge.
$ hg cat -r $H 'set:**'
aaaa
FFFF
GGGG
HHHH
Change I is a merge that has four baserevs; two from each parent. We handle
multiple baserevs in the same way regardless of how many came from each parent.
So, fixing change H will fix any files that were not exactly the same in each
baserev.
$ hg cat -r $I 'set:**'
aaaa
BBBB
CCCC
DDDD
EEEE
FFFF
GGGG
HHHH
IIII
Change J is a simple case with one baserev, but its baserev is not its parent,
change C. Its baserev is its grandparent, change B.
$ hg cat -r $J 'set:**'
aaaa
bbbb
CCCC
JJJJ
The working copy was dirty, so it is treated much like a revision. The baserevs
for the working copy are inherited from its parent, change H, because it is
also being fixed.
$ cat *
aaaa
FFFF
GGGG
HHHH
KKKK
Change A was never a baserev because none of its children were to be fixed.
$ cd ..