view tests/test-hgignore.t @ 37295:45b39c69fae0

wireproto: separate commands tables for version 1 and 2 commands

We can't easily reuse existing command handlers for version 2
commands because the response types will be different. e.g. many
commands return nodes encoded as hex. Our new wire protocol is
binary safe, so we'll wish to encode nodes as binary.

We /could/ teach each command handler to look at the protocol
handler and change behavior based on the version in use. However,
this would make logic a bit unwieldy over time and would make
it harder to design a unified protocol handler interface. I think
it's better to create a clean break between version 1 and version 2
of commands on the server.

What I imagine happening is we will have separate @wireprotocommand
functions for each protocol generation. Those functions will parse the
request, dispatch to a common function to process it, then generate
the response in its own, transport-specific manner.

This commit establishes a separate table for tracking version 1
commands from version 2 commands. The HTTP server pieces have been
updated to use this new table.

Most commands are marked as both version 1 and version 2, so there is
little practical impact to this change.

A side-effect of this change is we now rely on transport registration
in wireprototypes.TRANSPORTS and certain properties of the protocol
interface. So a test had to be updated to conform.

Differential Revision: https://phab.mercurial-scm.org/D2982

  $ hg init ignorerepo
  $ cd ignorerepo

debugignore with no hgignore should be deterministic:
  $ hg debugignore
  <nevermatcher>

Issue562: .hgignore requires newline at end:

  $ touch foo
  $ touch bar
  $ touch baz
  $ cat > makeignore.py <<EOF
  > f = open(".hgignore", "w")
  > f.write("ignore\n")
  > f.write("foo\n")
  > # No EOL here
  > f.write("bar")
  > f.close()
  > EOF

  $ $PYTHON makeignore.py

Should display baz only:

  $ hg status
  ? baz

  $ rm foo bar baz .hgignore makeignore.py

  $ touch a.o
  $ touch a.c
  $ touch syntax
  $ mkdir dir
  $ touch dir/a.o
  $ touch dir/b.o
  $ touch dir/c.o

  $ hg add dir/a.o
  $ hg commit -m 0
  $ hg add dir/b.o

  $ hg status
  A dir/b.o
  ? a.c
  ? a.o
  ? dir/c.o
  ? syntax

  $ echo "*.o" > .hgignore
  $ hg status
  abort: $TESTTMP/ignorerepo/.hgignore: invalid pattern (relre): *.o (glob)
  [255]

Ensure given files are relative to cwd

  $ echo "dir/.*\.o" > .hgignore
  $ hg status -i
  I dir/c.o

  $ hg debugignore dir/c.o dir/missing.o
  dir/c.o is ignored
  (ignore rule in $TESTTMP/ignorerepo/.hgignore, line 1: 'dir/.*\.o') (glob)
  dir/missing.o is ignored
  (ignore rule in $TESTTMP/ignorerepo/.hgignore, line 1: 'dir/.*\.o') (glob)
  $ cd dir
  $ hg debugignore c.o missing.o
  c.o is ignored
  (ignore rule in $TESTTMP/ignorerepo/.hgignore, line 1: 'dir/.*\.o') (glob)
  missing.o is ignored
  (ignore rule in $TESTTMP/ignorerepo/.hgignore, line 1: 'dir/.*\.o') (glob)

For icasefs, inexact matches also work, except for missing files

#if icasefs
  $ hg debugignore c.O missing.O
  c.o is ignored
  (ignore rule in $TESTTMP/ignorerepo/.hgignore, line 1: 'dir/.*\.o') (glob)
  missing.O is not ignored
#endif

  $ cd ..

  $ echo ".*\.o" > .hgignore
  $ hg status
  A dir/b.o
  ? .hgignore
  ? a.c
  ? syntax

Ensure that comments work:

  $ touch 'foo#bar' 'quux#'
#if no-windows
  $ touch 'baz\#wat'
#endif
  $ cat <<'EOF' >> .hgignore
  > # full-line comment
  >   # whitespace-only comment line
  > syntax# pattern, no whitespace, then comment
  > a.c  # pattern, then whitespace, then comment
  > baz\\# # escaped comment character
  > foo\#b # escaped comment character
  > quux\## escaped comment character at end of name
  > EOF
  $ hg status
  A dir/b.o
  ? .hgignore
  $ rm 'foo#bar' 'quux#'
#if no-windows
  $ rm 'baz\#wat'
#endif

Check that '^\.' does not ignore the root directory:

  $ echo "^\." > .hgignore
  $ hg status
  A dir/b.o
  ? a.c
  ? a.o
  ? dir/c.o
  ? syntax

Test that patterns from ui.ignore options are read:

  $ echo > .hgignore
  $ cat >> $HGRCPATH << EOF
  > [ui]
  > ignore.other = $TESTTMP/ignorerepo/.hg/testhgignore
  > EOF
  $ echo "glob:**.o" > .hg/testhgignore
  $ hg status
  A dir/b.o
  ? .hgignore
  ? a.c
  ? syntax

empty out testhgignore
  $ echo > .hg/testhgignore

Test relative ignore path (issue4473):

  $ cat >> $HGRCPATH << EOF
  > [ui]
  > ignore.relative = .hg/testhgignorerel
  > EOF
  $ echo "glob:*.o" > .hg/testhgignorerel
  $ cd dir
  $ hg status
  A dir/b.o
  ? .hgignore
  ? a.c
  ? syntax

  $ cd ..
  $ echo > .hg/testhgignorerel
  $ echo "syntax: glob" > .hgignore
  $ echo "re:.*\.o" >> .hgignore
  $ hg status
  A dir/b.o
  ? .hgignore
  ? a.c
  ? syntax

  $ echo "syntax: invalid" > .hgignore
  $ hg status
  $TESTTMP/ignorerepo/.hgignore: ignoring invalid syntax 'invalid'
  A dir/b.o
  ? .hgignore
  ? a.c
  ? a.o
  ? dir/c.o
  ? syntax

  $ echo "syntax: glob" > .hgignore
  $ echo "*.o" >> .hgignore
  $ hg status
  A dir/b.o
  ? .hgignore
  ? a.c
  ? syntax

  $ echo "relglob:syntax*" > .hgignore
  $ hg status
  A dir/b.o
  ? .hgignore
  ? a.c
  ? a.o
  ? dir/c.o

  $ echo "relglob:*" > .hgignore
  $ hg status
  A dir/b.o

  $ cd dir
  $ hg status .
  A b.o

  $ hg debugignore
  <includematcher includes='(?:(?:|.*/)[^/]*(?:/|$))'>

  $ hg debugignore b.o
  b.o is ignored
  (ignore rule in $TESTTMP/ignorerepo/.hgignore, line 1: '*') (glob)

  $ cd ..

Check patterns that match only the directory

"(fsmonitor !)" below assumes that fsmonitor is enabled with
"walk_on_invalidate = false" (default), which doesn't involve
re-walking whole repository at detection of .hgignore change.

  $ echo "^dir\$" > .hgignore
  $ hg status
  A dir/b.o
  ? .hgignore
  ? a.c
  ? a.o
  ? dir/c.o (fsmonitor !)
  ? syntax

Check recursive glob pattern matches no directories (dir/**/c.o matches dir/c.o)

  $ echo "syntax: glob" > .hgignore
  $ echo "dir/**/c.o" >> .hgignore
  $ touch dir/c.o
  $ mkdir dir/subdir
  $ touch dir/subdir/c.o
  $ hg status
  A dir/b.o
  ? .hgignore
  ? a.c
  ? a.o
  ? syntax
  $ hg debugignore a.c
  a.c is not ignored
  $ hg debugignore dir/c.o
  dir/c.o is ignored
  (ignore rule in $TESTTMP/ignorerepo/.hgignore, line 2: 'dir/**/c.o') (glob)

Check using 'include:' in ignore file

  $ hg purge --all --config extensions.purge=
  $ touch foo.included

  $ echo ".*.included" > otherignore
  $ hg status -I "include:otherignore"
  ? foo.included

  $ echo "include:otherignore" >> .hgignore
  $ hg status
  A dir/b.o
  ? .hgignore
  ? otherignore

Check recursive uses of 'include:'

  $ echo "include:nested/ignore" >> otherignore
  $ mkdir nested
  $ echo "glob:*ignore" > nested/ignore
  $ hg status
  A dir/b.o

  $ cp otherignore goodignore
  $ echo "include:badignore" >> otherignore
  $ hg status
  skipping unreadable pattern file 'badignore': $ENOENT$
  A dir/b.o

  $ mv goodignore otherignore

Check using 'include:' while in a non-root directory

  $ cd ..
  $ hg -R ignorerepo status
  A dir/b.o
  $ cd ignorerepo

Check including subincludes

  $ hg revert -q --all
  $ hg purge --all --config extensions.purge=
  $ echo ".hgignore" > .hgignore
  $ mkdir dir1 dir2
  $ touch dir1/file1 dir1/file2 dir2/file1 dir2/file2
  $ echo "subinclude:dir2/.hgignore" >> .hgignore
  $ echo "glob:file*2" > dir2/.hgignore
  $ hg status
  ? dir1/file1
  ? dir1/file2
  ? dir2/file1

Check including subincludes with regexs

  $ echo "subinclude:dir1/.hgignore" >> .hgignore
  $ echo "regexp:f.le1" > dir1/.hgignore

  $ hg status
  ? dir1/file2
  ? dir2/file1

Check multiple levels of sub-ignores

  $ mkdir dir1/subdir
  $ touch dir1/subdir/subfile1 dir1/subdir/subfile3 dir1/subdir/subfile4
  $ echo "subinclude:subdir/.hgignore" >> dir1/.hgignore
  $ echo "glob:subfil*3" >> dir1/subdir/.hgignore

  $ hg status
  ? dir1/file2
  ? dir1/subdir/subfile4
  ? dir2/file1

Check include subignore at the same level

  $ mv dir1/subdir/.hgignore dir1/.hgignoretwo
  $ echo "regexp:f.le1" > dir1/.hgignore
  $ echo "subinclude:.hgignoretwo" >> dir1/.hgignore
  $ echo "glob:file*2" > dir1/.hgignoretwo

  $ hg status | grep file2
  [1]
  $ hg debugignore dir1/file2
  dir1/file2 is ignored
  (ignore rule in dir2/.hgignore, line 1: 'file*2')

#if windows

Windows paths are accepted on input

  $ rm dir1/.hgignore
  $ echo "dir1/file*" >> .hgignore
  $ hg debugignore "dir1\file2"
  dir1\file2 is ignored
  (ignore rule in $TESTTMP\ignorerepo\.hgignore, line 4: 'dir1/file*')
  $ hg up -qC .

#endif