wireproto: separate commands tables for version 1 and 2 commands
We can't easily reuse existing command handlers for version 2
commands because the response types will be different. e.g. many
commands return nodes encoded as hex. Our new wire protocol is
binary safe, so we'll wish to encode nodes as binary.
We /could/ teach each command handler to look at the protocol
handler and change behavior based on the version in use. However,
this would make logic a bit unwieldy over time and would make
it harder to design a unified protocol handler interface. I think
it's better to create a clean break between version 1 and version 2
of commands on the server.
What I imagine happening is we will have separate @wireprotocommand
functions for each protocol generation. Those functions will parse the
request, dispatch to a common function to process it, then generate
the response in its own, transport-specific manner.
This commit establishes a separate table for tracking version 1
commands from version 2 commands. The HTTP server pieces have been
updated to use this new table.
Most commands are marked as both version 1 and version 2, so there is
little practical impact to this change.
A side-effect of this change is we now rely on transport registration
in wireprototypes.TRANSPORTS and certain properties of the protocol
interface. So a test had to be updated to conform.
Differential Revision: https://phab.mercurial-scm.org/D2982
Testing the case when there is no infinitepush extension present on the client
side and the server routes each push to bundlestore. This case is very much
similar to CI use case.
Setup
-----
$ . "$TESTDIR/library-infinitepush.sh"
$ cat >> $HGRCPATH <<EOF
> [alias]
> glog = log -GT "{rev}:{node|short} {desc}\n{phase}"
> EOF
$ cp $HGRCPATH $TESTTMP/defaulthgrc
$ hg init repo
$ cd repo
$ setupserver
$ echo "pushtobundlestore = True" >> .hg/hgrc
$ echo "[extensions]" >> .hg/hgrc
$ echo "infinitepush=" >> .hg/hgrc
$ echo initialcommit > initialcommit
$ hg ci -Aqm "initialcommit"
$ hg phase --public .
$ cd ..
$ hg clone repo client -q
$ hg clone repo client2 -q
$ cd client
Pushing a new commit from the client to the server
-----------------------------------------------------
$ echo foobar > a
$ hg ci -Aqm "added a"
$ hg glog
@ 1:6cb0989601f1 added a
| draft
o 0:67145f466344 initialcommit
public
$ hg push
pushing to $TESTTMP/repo
searching for changes
storing changesets on the bundlestore
pushing 1 commit:
6cb0989601f1 added a
$ scratchnodes
6cb0989601f1fb5805238edfb16f3606713d9a0b a4c202c147a9c4bb91bbadb56321fc5f3950f7f2
Understanding how data is stored on the bundlestore in server
-------------------------------------------------------------
There are two things, filebundlestore and index
$ ls ../repo/.hg/scratchbranches
filebundlestore
index
filebundlestore stores the bundles
$ ls ../repo/.hg/scratchbranches/filebundlestore/a4/c2/
a4c202c147a9c4bb91bbadb56321fc5f3950f7f2
index/nodemap stores a map of node id and file in which bundle is stored in filebundlestore
$ ls ../repo/.hg/scratchbranches/index/
nodemap
$ ls ../repo/.hg/scratchbranches/index/nodemap/
6cb0989601f1fb5805238edfb16f3606713d9a0b
$ cd ../repo
Checking that the commit was not applied to revlog on the server
------------------------------------------------------------------
$ hg glog
@ 0:67145f466344 initialcommit
public
Applying the changeset from the bundlestore
--------------------------------------------
$ hg unbundle .hg/scratchbranches/filebundlestore/a4/c2/a4c202c147a9c4bb91bbadb56321fc5f3950f7f2
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files
new changesets 6cb0989601f1
(run 'hg update' to get a working copy)
$ hg glog
o 1:6cb0989601f1 added a
| public
@ 0:67145f466344 initialcommit
public
Pushing more changesets from the local repo
--------------------------------------------
$ cd ../client
$ echo b > b
$ hg ci -Aqm "added b"
$ echo c > c
$ hg ci -Aqm "added c"
$ hg glog
@ 3:bf8a6e3011b3 added c
| draft
o 2:eaba929e866c added b
| draft
o 1:6cb0989601f1 added a
| public
o 0:67145f466344 initialcommit
public
$ hg push
pushing to $TESTTMP/repo
searching for changes
storing changesets on the bundlestore
pushing 2 commits:
eaba929e866c added b
bf8a6e3011b3 added c
Checking that changesets are not applied on the server
------------------------------------------------------
$ hg glog -R ../repo
o 1:6cb0989601f1 added a
| public
@ 0:67145f466344 initialcommit
public
Both of the new changesets are stored in a single bundle-file
$ scratchnodes
6cb0989601f1fb5805238edfb16f3606713d9a0b a4c202c147a9c4bb91bbadb56321fc5f3950f7f2
bf8a6e3011b345146bbbedbcb1ebd4837571492a ee41a41cefb7817cbfb235b4f6e9f27dbad6ca1f
eaba929e866c59bc9a6aada5a9dd2f6990db83c0 ee41a41cefb7817cbfb235b4f6e9f27dbad6ca1f
Pushing more changesets to the server
-------------------------------------
$ echo d > d
$ hg ci -Aqm "added d"
$ echo e > e
$ hg ci -Aqm "added e"
XXX: we should have pushed only the parts which are not in bundlestore
$ hg push
pushing to $TESTTMP/repo
searching for changes
storing changesets on the bundlestore
pushing 4 commits:
eaba929e866c added b
bf8a6e3011b3 added c
1bb96358eda2 added d
b4e4bce66051 added e
Sneak peek into the bundlestore at the server
$ scratchnodes
1bb96358eda285b536c6d1c66846a7cdb2336cea 57e00c0d4f26e2a2a72b751b63d9abc4f3eb28e7
6cb0989601f1fb5805238edfb16f3606713d9a0b a4c202c147a9c4bb91bbadb56321fc5f3950f7f2
b4e4bce660512ad3e71189e14588a70ac8e31fef 57e00c0d4f26e2a2a72b751b63d9abc4f3eb28e7
bf8a6e3011b345146bbbedbcb1ebd4837571492a 57e00c0d4f26e2a2a72b751b63d9abc4f3eb28e7
eaba929e866c59bc9a6aada5a9dd2f6990db83c0 57e00c0d4f26e2a2a72b751b63d9abc4f3eb28e7
Checking if `hg pull` pulls something or `hg incoming` shows something
-----------------------------------------------------------------------
$ hg incoming
comparing with $TESTTMP/repo
searching for changes
no changes found
[1]
$ hg pull
pulling from $TESTTMP/repo
searching for changes
no changes found
Pulling from second client to test `hg pull -r <rev>`
------------------------------------------------------
Pulling the revision which is applied
$ cd ../client2
$ hg pull -r 6cb0989601f1
pulling from $TESTTMP/repo
searching for changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files
new changesets 6cb0989601f1
(run 'hg update' to get a working copy)
$ hg glog
o 1:6cb0989601f1 added a
| public
@ 0:67145f466344 initialcommit
public
Pulling the revision which is in bundlestore
XXX: we should support pulling revisions from bundlestore without client side
wrapping
$ hg pull -r b4e4bce660512ad3e71189e14588a70ac8e31fef
pulling from $TESTTMP/repo
abort: unknown revision 'b4e4bce660512ad3e71189e14588a70ac8e31fef'!
[255]
$ hg glog
o 1:6cb0989601f1 added a
| public
@ 0:67145f466344 initialcommit
public
$ cd ../client
Checking storage of phase information with the bundle on bundlestore
---------------------------------------------------------------------
creating a draft commit
$ cat >> $HGRCPATH <<EOF
> [phases]
> publish = False
> EOF
$ echo f > f
$ hg ci -Aqm "added f"
$ hg glog -r '.^::'
@ 6:9b42578d4447 added f
| draft
o 5:b4e4bce66051 added e
| public
~
$ hg push
pushing to $TESTTMP/repo
searching for changes
storing changesets on the bundlestore
pushing 5 commits:
eaba929e866c added b
bf8a6e3011b3 added c
1bb96358eda2 added d
b4e4bce66051 added e
9b42578d4447 added f
XXX: the phase of 9b42578d4447 should not be changed here
$ hg glog -r .
@ 6:9b42578d4447 added f
| public
~
applying the bundle on the server to check preservation of phase-information
$ cd ../repo
$ scratchnodes
1bb96358eda285b536c6d1c66846a7cdb2336cea 0a6e70ecd5b98d22382f69b93909f557ac6a9927
6cb0989601f1fb5805238edfb16f3606713d9a0b a4c202c147a9c4bb91bbadb56321fc5f3950f7f2
9b42578d44473575994109161430d65dd147d16d 0a6e70ecd5b98d22382f69b93909f557ac6a9927
b4e4bce660512ad3e71189e14588a70ac8e31fef 0a6e70ecd5b98d22382f69b93909f557ac6a9927
bf8a6e3011b345146bbbedbcb1ebd4837571492a 0a6e70ecd5b98d22382f69b93909f557ac6a9927
eaba929e866c59bc9a6aada5a9dd2f6990db83c0 0a6e70ecd5b98d22382f69b93909f557ac6a9927
$ hg unbundle .hg/scratchbranches/filebundlestore/0a/6e/0a6e70ecd5b98d22382f69b93909f557ac6a9927
adding changesets
adding manifests
adding file changes
added 5 changesets with 5 changes to 5 files
new changesets eaba929e866c:9b42578d4447
(run 'hg update' to get a working copy)
$ hg glog
o 6:9b42578d4447 added f
| draft
o 5:b4e4bce66051 added e
| public
o 4:1bb96358eda2 added d
| public
o 3:bf8a6e3011b3 added c
| public
o 2:eaba929e866c added b
| public
o 1:6cb0989601f1 added a
| public
@ 0:67145f466344 initialcommit
public
Checking storage of obsmarkers in the bundlestore
--------------------------------------------------
enabling obsmarkers and rebase extension
$ cat >> $HGRCPATH << EOF
> [experimental]
> evolution = all
> [extensions]
> rebase =
> EOF
$ cd ../client
$ hg phase -r . --draft --force
$ hg rebase -r 6 -d 3
rebasing 6:9b42578d4447 "added f" (tip)
$ hg glog
@ 7:99949238d9ac added f
| draft
| o 5:b4e4bce66051 added e
| | public
| o 4:1bb96358eda2 added d
|/ public
o 3:bf8a6e3011b3 added c
| public
o 2:eaba929e866c added b
| public
o 1:6cb0989601f1 added a
| public
o 0:67145f466344 initialcommit
public
$ hg push -f
pushing to $TESTTMP/repo
searching for changes
storing changesets on the bundlestore
pushing 1 commit:
99949238d9ac added f
XXX: the phase should not have changed here
$ hg glog -r .
@ 7:99949238d9ac added f
| public
~
Unbundling on server to see obsmarkers being applied
$ cd ../repo
$ scratchnodes
1bb96358eda285b536c6d1c66846a7cdb2336cea 0a6e70ecd5b98d22382f69b93909f557ac6a9927
6cb0989601f1fb5805238edfb16f3606713d9a0b a4c202c147a9c4bb91bbadb56321fc5f3950f7f2
99949238d9ac7f2424a33a46dface6f866afd059 090a24fe63f31d3b4bee714447f835c8c362ff57
9b42578d44473575994109161430d65dd147d16d 0a6e70ecd5b98d22382f69b93909f557ac6a9927
b4e4bce660512ad3e71189e14588a70ac8e31fef 0a6e70ecd5b98d22382f69b93909f557ac6a9927
bf8a6e3011b345146bbbedbcb1ebd4837571492a 0a6e70ecd5b98d22382f69b93909f557ac6a9927
eaba929e866c59bc9a6aada5a9dd2f6990db83c0 0a6e70ecd5b98d22382f69b93909f557ac6a9927
$ hg glog
o 6:9b42578d4447 added f
| draft
o 5:b4e4bce66051 added e
| public
o 4:1bb96358eda2 added d
| public
o 3:bf8a6e3011b3 added c
| public
o 2:eaba929e866c added b
| public
o 1:6cb0989601f1 added a
| public
@ 0:67145f466344 initialcommit
public
$ hg unbundle .hg/scratchbranches/filebundlestore/09/0a/090a24fe63f31d3b4bee714447f835c8c362ff57
adding changesets
adding manifests
adding file changes
added 1 changesets with 0 changes to 1 files (+1 heads)
1 new obsolescence markers
obsoleted 1 changesets
new changesets 99949238d9ac
(run 'hg heads' to see heads, 'hg merge' to merge)
$ hg glog
o 7:99949238d9ac added f
| draft
| o 5:b4e4bce66051 added e
| | public
| o 4:1bb96358eda2 added d
|/ public
o 3:bf8a6e3011b3 added c
| public
o 2:eaba929e866c added b
| public
o 1:6cb0989601f1 added a
| public
@ 0:67145f466344 initialcommit
public