view tests/test-init.t @ 37295:45b39c69fae0

wireproto: separate commands tables for version 1 and 2 commands

We can't easily reuse existing command handlers for version 2
commands because the response types will be different. e.g. many
commands return nodes encoded as hex. Our new wire protocol is
binary safe, so we'll wish to encode nodes as binary.

We /could/ teach each command handler to look at the protocol
handler and change behavior based on the version in use. However,
this would make logic a bit unwieldy over time and would make
it harder to design a unified protocol handler interface. I think
it's better to create a clean break between version 1 and version 2
of commands on the server.

What I imagine happening is we will have separate @wireprotocommand
functions for each protocol generation. Those functions will parse the
request, dispatch to a common function to process it, then generate
the response in its own, transport-specific manner.

This commit establishes a separate table for tracking version 1
commands from version 2 commands. The HTTP server pieces have been
updated to use this new table.

Most commands are marked as both version 1 and version 2, so there is
little practical impact to this change.

A side-effect of this change is we now rely on transport registration
in wireprototypes.TRANSPORTS and certain properties of the protocol
interface. So a test had to be updated to conform.

Differential Revision: https://phab.mercurial-scm.org/D2982

This test tries to exercise the ssh functionality with a dummy script

(enable general delta early)

  $ cat << EOF >> $HGRCPATH
  > [format]
  > usegeneraldelta=yes
  > EOF

  $ checknewrepo()
  > {
  >    name=$1
  >    if [ -d "$name"/.hg/store ]; then
  >    echo store created
  >    fi
  >    if [ -f "$name"/.hg/00changelog.i ]; then
  >    echo 00changelog.i created
  >    fi
  >    cat "$name"/.hg/requires
  > }

creating 'local'

  $ hg init local
  $ checknewrepo local
  store created
  00changelog.i created
  dotencode
  fncache
  generaldelta
  revlogv1
  store
  $ echo this > local/foo
  $ hg ci --cwd local -A -m "init"
  adding foo

test custom revlog chunk cache sizes

  $ hg --config format.chunkcachesize=0 log -R local -pv
  abort: revlog chunk cache size 0 is not greater than 0!
  [255]
  $ hg --config format.chunkcachesize=1023 log -R local -pv
  abort: revlog chunk cache size 1023 is not a power of 2!
  [255]
  $ hg --config format.chunkcachesize=1024 log -R local -pv
  changeset:   0:08b9e9f63b32
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  files:       foo
  description:
  init
  
  
  diff -r 000000000000 -r 08b9e9f63b32 foo
  --- /dev/null	Thu Jan 01 00:00:00 1970 +0000
  +++ b/foo	Thu Jan 01 00:00:00 1970 +0000
  @@ -0,0 +1,1 @@
  +this
  

creating repo with format.usestore=false

  $ hg --config format.usestore=false init old
  $ checknewrepo old
  generaldelta
  revlogv1

creating repo with format.usefncache=false

  $ hg --config format.usefncache=false init old2
  $ checknewrepo old2
  store created
  00changelog.i created
  generaldelta
  revlogv1
  store

creating repo with format.dotencode=false

  $ hg --config format.dotencode=false init old3
  $ checknewrepo old3
  store created
  00changelog.i created
  fncache
  generaldelta
  revlogv1
  store

creating repo with format.dotencode=false

  $ hg --config format.generaldelta=false --config format.usegeneraldelta=false init old4
  $ checknewrepo old4
  store created
  00changelog.i created
  dotencode
  fncache
  revlogv1
  store

test failure

  $ hg init local
  abort: repository local already exists!
  [255]

init+push to remote2

  $ hg init -e "\"$PYTHON\" \"$TESTDIR/dummyssh\"" ssh://user@dummy/remote2
  $ hg incoming -R remote2 local
  comparing with local
  changeset:   0:08b9e9f63b32
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     init
  

  $ hg push -R local -e "\"$PYTHON\" \"$TESTDIR/dummyssh\"" ssh://user@dummy/remote2
  pushing to ssh://user@dummy/remote2
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 1 changesets with 1 changes to 1 files

clone to remote1

  $ hg clone -e "\"$PYTHON\" \"$TESTDIR/dummyssh\"" local ssh://user@dummy/remote1
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 1 changesets with 1 changes to 1 files

The largefiles extension doesn't crash
  $ hg clone -e "\"$PYTHON\" \"$TESTDIR/dummyssh\"" local ssh://user@dummy/remotelf --config extensions.largefiles=
  The fsmonitor extension is incompatible with the largefiles extension and has been disabled. (fsmonitor !)
  The fsmonitor extension is incompatible with the largefiles extension and has been disabled. (fsmonitor !)
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 1 changesets with 1 changes to 1 files

init to existing repo

  $ hg init -e "\"$PYTHON\" \"$TESTDIR/dummyssh\"" ssh://user@dummy/remote1
  abort: repository remote1 already exists!
  abort: could not create remote repo!
  [255]

clone to existing repo

  $ hg clone -e "\"$PYTHON\" \"$TESTDIR/dummyssh\"" local ssh://user@dummy/remote1
  abort: repository remote1 already exists!
  abort: could not create remote repo!
  [255]

output of dummyssh

  $ cat dummylog
  Got arguments 1:user@dummy 2:hg init remote2
  Got arguments 1:user@dummy 2:hg -R remote2 serve --stdio
  Got arguments 1:user@dummy 2:hg -R remote2 serve --stdio
  Got arguments 1:user@dummy 2:hg init remote1
  Got arguments 1:user@dummy 2:hg -R remote1 serve --stdio
  Got arguments 1:user@dummy 2:hg init remotelf
  Got arguments 1:user@dummy 2:hg -R remotelf serve --stdio
  Got arguments 1:user@dummy 2:hg init remote1
  Got arguments 1:user@dummy 2:hg init remote1

comparing repositories

  $ hg tip -q -R local
  0:08b9e9f63b32
  $ hg tip -q -R remote1
  0:08b9e9f63b32
  $ hg tip -q -R remote2
  0:08b9e9f63b32

check names for repositories (clashes with URL schemes, special chars)

  $ for i in bundle file hg http https old-http ssh static-http "with space"; do
  >   printf "hg init \"$i\"... "
  >   hg init "$i"
  >   test -d "$i" -a -d "$i/.hg" && echo "ok" || echo "failed"
  > done
  hg init "bundle"... ok
  hg init "file"... ok
  hg init "hg"... ok
  hg init "http"... ok
  hg init "https"... ok
  hg init "old-http"... ok
  hg init "ssh"... ok
  hg init "static-http"... ok
  hg init "with space"... ok
#if eol-in-paths
/* " " is not a valid name for a directory on Windows */
  $ hg init " "
  $ test -d " "
  $ test -d " /.hg"
#endif

creating 'local/sub/repo'

  $ hg init local/sub/repo
  $ checknewrepo local/sub/repo
  store created
  00changelog.i created
  dotencode
  fncache
  generaldelta
  revlogv1
  store

prepare test of init of url configured from paths

  $ echo '[paths]' >> $HGRCPATH
  $ echo "somewhere = `pwd`/url from paths" >> $HGRCPATH
  $ echo "elsewhere = `pwd`/another paths url" >> $HGRCPATH

init should (for consistency with clone) expand the url

  $ hg init somewhere
  $ checknewrepo "url from paths"
  store created
  00changelog.i created
  dotencode
  fncache
  generaldelta
  revlogv1
  store

verify that clone also expand urls

  $ hg clone somewhere elsewhere
  updating to branch default
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ checknewrepo "another paths url"
  store created
  00changelog.i created
  dotencode
  fncache
  generaldelta
  revlogv1
  store

clone bookmarks

  $ hg -R local bookmark test
  $ hg -R local bookmarks
   * test                      0:08b9e9f63b32
  $ hg clone -e "\"$PYTHON\" \"$TESTDIR/dummyssh\"" local ssh://user@dummy/remote-bookmarks
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 1 changesets with 1 changes to 1 files
  exporting bookmark test
  $ hg -R remote-bookmarks bookmarks
     test                      0:08b9e9f63b32