view tests/test-largefiles-wireproto.t @ 37295:45b39c69fae0

wireproto: separate commands tables for version 1 and 2 commands

We can't easily reuse existing command handlers for version 2
commands because the response types will be different. e.g. many
commands return nodes encoded as hex. Our new wire protocol is
binary safe, so we'll wish to encode nodes as binary.

We /could/ teach each command handler to look at the protocol
handler and change behavior based on the version in use. However,
this would make logic a bit unwieldy over time and would make
it harder to design a unified protocol handler interface. I think
it's better to create a clean break between version 1 and version 2
of commands on the server.

What I imagine happening is we will have separate @wireprotocommand
functions for each protocol generation. Those functions will parse the
request, dispatch to a common function to process it, then generate
the response in its own, transport-specific manner.

This commit establishes a separate table for tracking version 1
commands from version 2 commands. The HTTP server pieces have been
updated to use this new table.

Most commands are marked as both version 1 and version 2, so there is
little practical impact to this change.

A side-effect of this change is we now rely on transport registration
in wireprototypes.TRANSPORTS and certain properties of the protocol
interface. So a test had to be updated to conform.

Differential Revision: https://phab.mercurial-scm.org/D2982

#testcases sshv1 sshv2

#if sshv2
  $ cat >> $HGRCPATH << EOF
  > [experimental]
  > sshpeer.advertise-v2 = true
  > sshserver.support-v2 = true
  > EOF
#endif

This file contains testcases that tend to be related to the wire protocol part
of largefiles.

  $ USERCACHE="$TESTTMP/cache"; export USERCACHE
  $ mkdir "${USERCACHE}"
  $ cat >> $HGRCPATH <<EOF
  > [extensions]
  > largefiles=
  > purge=
  > rebase=
  > transplant=
  > [phases]
  > publish=False
  > [largefiles]
  > minsize=2
  > patterns=glob:**.dat
  > usercache=${USERCACHE}
  > [web]
  > allow_archive = zip
  > [hooks]
  > precommit=sh -c "echo \\"Invoking status precommit hook\\"; hg status"
  > EOF


#if serve
vanilla clients not locked out from largefiles servers on vanilla repos
  $ mkdir r1
  $ cd r1
  $ hg init
  $ echo c1 > f1
  $ hg add f1
  $ hg commit -m "m1"
  Invoking status precommit hook
  A f1
  $ cd ..
  $ hg serve -R r1 -d -p $HGPORT --pid-file hg.pid
  $ cat hg.pid >> $DAEMON_PIDS
  $ hg --config extensions.largefiles=! clone http://localhost:$HGPORT r2
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  new changesets b6eb3a2e2efe
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

largefiles clients still work with vanilla servers
  $ hg serve --config extensions.largefiles=! -R r1 -d -p $HGPORT1 --pid-file hg.pid
  $ cat hg.pid >> $DAEMON_PIDS
  $ hg clone http://localhost:$HGPORT1 r3
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  new changesets b6eb3a2e2efe
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
#endif

vanilla clients locked out from largefiles http repos
  $ mkdir r4
  $ cd r4
  $ hg init
  $ echo c1 > f1
  $ hg add --large f1
  $ hg commit -m "m1"
  Invoking status precommit hook
  A f1
  $ cd ..

largefiles can be pushed locally (issue3583)
  $ hg init dest
  $ cd r4
  $ hg outgoing ../dest
  comparing with ../dest
  searching for changes
  changeset:   0:639881c12b4c
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     m1
  
  $ hg push ../dest
  pushing to ../dest
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files

exit code with nothing outgoing (issue3611)
  $ hg outgoing ../dest
  comparing with ../dest
  searching for changes
  no changes found
  [1]
  $ cd ..

#if serve
  $ hg serve -R r4 -d -p $HGPORT2 --pid-file hg.pid
  $ cat hg.pid >> $DAEMON_PIDS
  $ hg --config extensions.largefiles=! clone http://localhost:$HGPORT2 r5
  abort: remote error:
  
  This repository uses the largefiles extension.
  
  Please enable it in your Mercurial config file.
  [255]

used all HGPORTs, kill all daemons
  $ killdaemons.py
#endif

vanilla clients locked out from largefiles ssh repos
  $ hg --config extensions.largefiles=! clone -e "\"$PYTHON\" \"$TESTDIR/dummyssh\"" ssh://user@dummy/r4 r5
  remote: 
  remote: This repository uses the largefiles extension.
  remote: 
  remote: Please enable it in your Mercurial config file.
  remote: 
  remote: -
  abort: remote error
  (check previous remote output)
  [255]

#if serve

largefiles clients refuse to push largefiles repos to vanilla servers
  $ mkdir r6
  $ cd r6
  $ hg init
  $ echo c1 > f1
  $ hg add f1
  $ hg commit -m "m1"
  Invoking status precommit hook
  A f1
  $ cat >> .hg/hgrc <<!
  > [web]
  > push_ssl = false
  > allow_push = *
  > !
  $ cd ..
  $ hg clone r6 r7
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd r7
  $ echo c2 > f2
  $ hg add --large f2
  $ hg commit -m "m2"
  Invoking status precommit hook
  A f2
  $ hg verify --large
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  2 files, 2 changesets, 2 total revisions
  searching 1 changesets for largefiles
  verified existence of 1 revisions of 1 largefiles
  $ hg serve --config extensions.largefiles=! -R ../r6 -d -p $HGPORT --pid-file ../hg.pid
  $ cat ../hg.pid >> $DAEMON_PIDS
  $ hg push http://localhost:$HGPORT
  pushing to http://localhost:$HGPORT/
  searching for changes
  abort: http://localhost:$HGPORT/ does not appear to be a largefile store
  [255]
  $ cd ..

putlfile errors are shown (issue3123)
Corrupt the cached largefile in r7 and move it out of the servers usercache
  $ mv r7/.hg/largefiles/4cdac4d8b084d0b599525cf732437fb337d422a8 .
  $ echo 'client side corruption' > r7/.hg/largefiles/4cdac4d8b084d0b599525cf732437fb337d422a8
  $ rm "$USERCACHE/4cdac4d8b084d0b599525cf732437fb337d422a8"
  $ hg init empty
  $ hg serve -R empty -d -p $HGPORT1 --pid-file hg.pid \
  >   --config 'web.allow_push=*' --config web.push_ssl=False
  $ cat hg.pid >> $DAEMON_PIDS
  $ hg push -R r7 http://localhost:$HGPORT1
  pushing to http://localhost:$HGPORT1/
  searching for changes
  remote: largefiles: failed to put 4cdac4d8b084d0b599525cf732437fb337d422a8 into store: largefile contents do not match hash
  abort: remotestore: could not put $TESTTMP/r7/.hg/largefiles/4cdac4d8b084d0b599525cf732437fb337d422a8 to remote store http://localhost:$HGPORT1/
  [255]
  $ mv 4cdac4d8b084d0b599525cf732437fb337d422a8 r7/.hg/largefiles/4cdac4d8b084d0b599525cf732437fb337d422a8
Push of file that exists on server but is corrupted - magic healing would be nice ... but too magic
  $ echo "server side corruption" > empty/.hg/largefiles/4cdac4d8b084d0b599525cf732437fb337d422a8
  $ hg push -R r7 http://localhost:$HGPORT1
  pushing to http://localhost:$HGPORT1/
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 2 changesets with 2 changes to 2 files
  $ cat empty/.hg/largefiles/4cdac4d8b084d0b599525cf732437fb337d422a8
  server side corruption
  $ rm -rf empty

Push a largefiles repository to a served empty repository
  $ hg init r8
  $ echo c3 > r8/f1
  $ hg add --large r8/f1 -R r8
  $ hg commit -m "m1" -R r8
  Invoking status precommit hook
  A f1
  $ hg init empty
  $ hg serve -R empty -d -p $HGPORT2 --pid-file hg.pid \
  >   --config 'web.allow_push=*' --config web.push_ssl=False
  $ cat hg.pid >> $DAEMON_PIDS
  $ rm "${USERCACHE}"/*
  $ hg push -R r8 http://localhost:$HGPORT2/#default
  pushing to http://localhost:$HGPORT2/
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 1 changesets with 1 changes to 1 files
  $ [ -f "${USERCACHE}"/02a439e5c31c526465ab1a0ca1f431f76b827b90 ]
  $ [ -f empty/.hg/largefiles/02a439e5c31c526465ab1a0ca1f431f76b827b90 ]

Clone over http, no largefiles pulled on clone.

  $ hg clone http://localhost:$HGPORT2/#default http-clone -U
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  new changesets cf03e5bb9936

Archive contains largefiles
  >>> import os
  >>> import urllib2
  >>> u = 'http://localhost:%s/archive/default.zip' % os.environ['HGPORT2']
  >>> with open('archive.zip', 'w') as f:
  ...     f.write(urllib2.urlopen(u).read())
  $ unzip -t archive.zip
  Archive:  archive.zip
      testing: empty-default/.hg_archival.txt*OK (glob)
      testing: empty-default/f1*OK (glob)
  No errors detected in compressed data of archive.zip.

test 'verify' with remotestore:

  $ rm "${USERCACHE}"/02a439e5c31c526465ab1a0ca1f431f76b827b90
  $ mv empty/.hg/largefiles/02a439e5c31c526465ab1a0ca1f431f76b827b90 .
  $ hg -R http-clone verify --large --lfa
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  1 files, 1 changesets, 1 total revisions
  searching 1 changesets for largefiles
  changeset 0:cf03e5bb9936: f1 missing
  verified existence of 1 revisions of 1 largefiles
  [1]
  $ mv 02a439e5c31c526465ab1a0ca1f431f76b827b90 empty/.hg/largefiles/
  $ hg -R http-clone -q verify --large --lfa

largefiles pulled on update - a largefile missing on the server:
  $ mv empty/.hg/largefiles/02a439e5c31c526465ab1a0ca1f431f76b827b90 .
  $ hg -R http-clone up --config largefiles.usercache=http-clone-usercache
  getting changed largefiles
  f1: largefile 02a439e5c31c526465ab1a0ca1f431f76b827b90 not available from http://localhost:$HGPORT2/
  0 largefiles updated, 0 removed
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg -R http-clone st
  ! f1
  $ hg -R http-clone up -Cqr null

largefiles pulled on update - a largefile corrupted on the server:
  $ echo corruption > empty/.hg/largefiles/02a439e5c31c526465ab1a0ca1f431f76b827b90
  $ hg -R http-clone up --config largefiles.usercache=http-clone-usercache
  getting changed largefiles
  f1: data corruption (expected 02a439e5c31c526465ab1a0ca1f431f76b827b90, got 6a7bb2556144babe3899b25e5428123735bb1e27)
  0 largefiles updated, 0 removed
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg -R http-clone st
  ! f1
  $ [ ! -f http-clone/.hg/largefiles/02a439e5c31c526465ab1a0ca1f431f76b827b90 ]
  $ [ ! -f http-clone/f1 ]
  $ [ ! -f http-clone-usercache ]
  $ hg -R http-clone verify --large --lfc
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  1 files, 1 changesets, 1 total revisions
  searching 1 changesets for largefiles
  verified contents of 1 revisions of 1 largefiles
  $ hg -R http-clone up -Cqr null

largefiles pulled on update - no server side problems:
  $ mv 02a439e5c31c526465ab1a0ca1f431f76b827b90 empty/.hg/largefiles/
  $ hg -R http-clone --debug up --config largefiles.usercache=http-clone-usercache --config progress.debug=true
  resolving manifests
   branchmerge: False, force: False, partial: False
   ancestor: 000000000000, local: 000000000000+, remote: cf03e5bb9936
   .hglf/f1: remote created -> g
  getting .hglf/f1
  updating: .hglf/f1 1/1 files (100.00%)
  getting changed largefiles
  using http://localhost:$HGPORT2/
  sending capabilities command
  sending batch command
  getting largefiles: 0/1 files (0.00%)
  getting f1:02a439e5c31c526465ab1a0ca1f431f76b827b90
  sending getlfile command
  found 02a439e5c31c526465ab1a0ca1f431f76b827b90 in store
  1 largefiles updated, 0 removed
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ ls http-clone-usercache/*
  http-clone-usercache/02a439e5c31c526465ab1a0ca1f431f76b827b90

  $ rm -rf empty http-clone*

used all HGPORTs, kill all daemons
  $ killdaemons.py

largefiles should batch verify remote calls

  $ hg init batchverifymain
  $ cd batchverifymain
  $ echo "aaa" >> a
  $ hg add --large a
  $ hg commit -m "a"
  Invoking status precommit hook
  A a
  $ echo "bbb" >> b
  $ hg add --large b
  $ hg commit -m "b"
  Invoking status precommit hook
  A b
  $ cd ..
  $ hg serve -R batchverifymain -d -p $HGPORT --pid-file hg.pid \
  > -A access.log
  $ cat hg.pid >> $DAEMON_PIDS
  $ hg clone --noupdate http://localhost:$HGPORT batchverifyclone
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 2 files
  new changesets 567253b0f523:04d19c27a332
  $ hg -R batchverifyclone verify --large --lfa
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  2 files, 2 changesets, 2 total revisions
  searching 2 changesets for largefiles
  verified existence of 2 revisions of 2 largefiles
  $ tail -1 access.log
  $LOCALIP - - [$LOGDATE$] "GET /?cmd=batch HTTP/1.1" 200 - x-hgarg-1:cmds=statlfile+sha%3D972a1a11f19934401291cc99117ec614933374ce%3Bstatlfile+sha%3Dc801c9cfe94400963fcb683246217d5db77f9a9a x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ (glob)
  $ hg -R batchverifyclone update
  getting changed largefiles
  2 largefiles updated, 0 removed
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved

Clear log file before next test

  $ printf "" > access.log

Verify should check file on remote server only when file is not
available locally.

  $ echo "ccc" >> batchverifymain/c
  $ hg -R batchverifymain status
  ? c
  $ hg -R batchverifymain add --large batchverifymain/c
  $ hg -R batchverifymain commit -m "c"
  Invoking status precommit hook
  A c
  $ hg -R batchverifyclone pull
  pulling from http://localhost:$HGPORT/
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  new changesets 6bba8cb6935d
  (run 'hg update' to get a working copy)
  $ hg -R batchverifyclone verify --lfa
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  3 files, 3 changesets, 3 total revisions
  searching 3 changesets for largefiles
  verified existence of 3 revisions of 3 largefiles
  $ tail -1 access.log
  $LOCALIP - - [$LOGDATE$] "GET /?cmd=batch HTTP/1.1" 200 - x-hgarg-1:cmds=statlfile+sha%3Dc8559c3c9cfb42131794b7d8009230403b9b454c x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ (glob)

  $ killdaemons.py

largefiles should not ask for password again after successful authorization

  $ hg init credentialmain
  $ cd credentialmain
  $ echo "aaa" >> a
  $ hg add --large a
  $ hg commit -m "a"
  Invoking status precommit hook
  A a

Before running server clear the user cache to force clone to download
a large file from the server rather than to get it from the cache

  $ rm "${USERCACHE}"/*

  $ cd ..
  $ cat << EOT > userpass.py
  > import base64
  > from mercurial.hgweb import common
  > def perform_authentication(hgweb, req, op):
  >     auth = req.headers.get('Authorization')
  >     if not auth:
  >         raise common.ErrorResponse(common.HTTP_UNAUTHORIZED, 'who',
  >                 [('WWW-Authenticate', 'Basic Realm="mercurial"')])
  >     if base64.b64decode(auth.split()[1]).split(':', 1) != ['user', 'pass']:
  >         raise common.ErrorResponse(common.HTTP_FORBIDDEN, 'no')
  > def extsetup():
  >     common.permhooks.insert(0, perform_authentication)
  > EOT
  $ hg serve --config extensions.x=userpass.py -R credentialmain \
  >          -d -p $HGPORT --pid-file hg.pid -A access.log
  $ cat hg.pid >> $DAEMON_PIDS
  $ cat << EOF > get_pass.py
  > import getpass
  > def newgetpass(arg):
  >   return "pass"
  > getpass.getpass = newgetpass
  > EOF
  $ hg clone --config ui.interactive=true --config extensions.getpass=get_pass.py \
  >          http://user@localhost:$HGPORT credentialclone
  http authorization required for http://localhost:$HGPORT/
  realm: mercurial
  user: user
  password: requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  new changesets 567253b0f523
  updating to branch default
  getting changed largefiles
  1 largefiles updated, 0 removed
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ killdaemons.py
  $ rm hg.pid access.log

#endif