view tests/test-pager.t @ 37295:45b39c69fae0

wireproto: separate commands tables for version 1 and 2 commands

We can't easily reuse existing command handlers for version 2
commands because the response types will be different. e.g. many
commands return nodes encoded as hex. Our new wire protocol is
binary safe, so we'll wish to encode nodes as binary.

We /could/ teach each command handler to look at the protocol
handler and change behavior based on the version in use. However,
this would make logic a bit unwieldy over time and would make
it harder to design a unified protocol handler interface. I think
it's better to create a clean break between version 1 and version 2
of commands on the server.

What I imagine happening is we will have separate @wireprotocommand
functions for each protocol generation. Those functions will parse the
request, dispatch to a common function to process it, then generate
the response in its own, transport-specific manner.

This commit establishes a separate table for tracking version 1
commands from version 2 commands. The HTTP server pieces have been
updated to use this new table.

Most commands are marked as both version 1 and version 2, so there is
little practical impact to this change.

A side-effect of this change is we now rely on transport registration
in wireprototypes.TRANSPORTS and certain properties of the protocol
interface. So a test had to be updated to conform.

Differential Revision: https://phab.mercurial-scm.org/D2982

  $ cat >> fakepager.py <<EOF
  > import sys
  > printed = False
  > for line in sys.stdin:
  >     sys.stdout.write('paged! %r\n' % line)
  >     printed = True
  > if not printed:
  >     sys.stdout.write('paged empty output!\n')
  > EOF

Enable ui.formatted because pager won't fire without it, and set up
pager and tell it to use our fake pager that lets us see when the
pager was running.
  $ cat >> $HGRCPATH <<EOF
  > [ui]
  > formatted = yes
  > color = no
  > [pager]
  > pager = $PYTHON $TESTTMP/fakepager.py
  > EOF

  $ hg init repo
  $ cd repo
  $ echo a >> a
  $ hg add a
  $ hg ci -m 'add a'
  $ for x in `$PYTHON $TESTDIR/seq.py 1 10`; do
  >   echo a $x >> a
  >   hg ci -m "modify a $x"
  > done

By default diff and log are paged, but id is not:

  $ hg diff -c 2 --pager=yes
  paged! 'diff -r f4be7687d414 -r bce265549556 a\n'
  paged! '--- a/a\tThu Jan 01 00:00:00 1970 +0000\n'
  paged! '+++ b/a\tThu Jan 01 00:00:00 1970 +0000\n'
  paged! '@@ -1,2 +1,3 @@\n'
  paged! ' a\n'
  paged! ' a 1\n'
  paged! '+a 2\n'

  $ hg log --limit 2
  paged! 'changeset:   10:46106edeeb38\n'
  paged! 'tag:         tip\n'
  paged! 'user:        test\n'
  paged! 'date:        Thu Jan 01 00:00:00 1970 +0000\n'
  paged! 'summary:     modify a 10\n'
  paged! '\n'
  paged! 'changeset:   9:6dd8ea7dd621\n'
  paged! 'user:        test\n'
  paged! 'date:        Thu Jan 01 00:00:00 1970 +0000\n'
  paged! 'summary:     modify a 9\n'
  paged! '\n'

  $ hg id
  46106edeeb38 tip

We can control the pager from the config

  $ hg log --limit 1 --config 'ui.paginate=False'
  changeset:   10:46106edeeb38
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     modify a 10
  
  $ hg log --limit 1 --config 'ui.paginate=0'
  changeset:   10:46106edeeb38
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     modify a 10
  
  $ hg log --limit 1 --config 'ui.paginate=1'
  paged! 'changeset:   10:46106edeeb38\n'
  paged! 'tag:         tip\n'
  paged! 'user:        test\n'
  paged! 'date:        Thu Jan 01 00:00:00 1970 +0000\n'
  paged! 'summary:     modify a 10\n'
  paged! '\n'

explicit --pager=on should take precedence over other configurations
(issue5580)

  $ cat >> $HGRCPATH <<EOF
  > [ui]
  > paginate = false
  > EOF
  $ hg log --limit 1 --pager=on
  paged! 'changeset:   10:46106edeeb38\n'
  paged! 'tag:         tip\n'
  paged! 'user:        test\n'
  paged! 'date:        Thu Jan 01 00:00:00 1970 +0000\n'
  paged! 'summary:     modify a 10\n'
  paged! '\n'

  $ cat >> $HGRCPATH <<EOF
  > [ui]
  > # true is default value of ui.paginate
  > paginate = true
  > EOF
  $ hg log --limit 1 --pager=off
  changeset:   10:46106edeeb38
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     modify a 10
  

We can enable the pager on id:

BROKEN: should be paged
  $ hg --config pager.attend-id=yes id
  46106edeeb38 tip

Setting attend-$COMMAND to a false value works, even with pager in
core:
  $ hg --config pager.attend-diff=no diff -c 2
  diff -r f4be7687d414 -r bce265549556 a
  --- a/a	Thu Jan 01 00:00:00 1970 +0000
  +++ b/a	Thu Jan 01 00:00:00 1970 +0000
  @@ -1,2 +1,3 @@
   a
   a 1
  +a 2

Command aliases should have same behavior as main command

  $ hg history --limit 2
  paged! 'changeset:   10:46106edeeb38\n'
  paged! 'tag:         tip\n'
  paged! 'user:        test\n'
  paged! 'date:        Thu Jan 01 00:00:00 1970 +0000\n'
  paged! 'summary:     modify a 10\n'
  paged! '\n'
  paged! 'changeset:   9:6dd8ea7dd621\n'
  paged! 'user:        test\n'
  paged! 'date:        Thu Jan 01 00:00:00 1970 +0000\n'
  paged! 'summary:     modify a 9\n'
  paged! '\n'

Abbreviated command alias should also be paged

  $ hg hist -l 1
  paged! 'changeset:   10:46106edeeb38\n'
  paged! 'tag:         tip\n'
  paged! 'user:        test\n'
  paged! 'date:        Thu Jan 01 00:00:00 1970 +0000\n'
  paged! 'summary:     modify a 10\n'
  paged! '\n'

Attend for an abbreviated command does not work

  $ hg --config pager.attend-ident=true ident
  46106edeeb38 tip

  $ hg --config extensions.pager= --config pager.attend-ident=true ident
  46106edeeb38 tip

Pager should not start if stdout is not a tty.

  $ hg log -l1 -q --config ui.formatted=False
  10:46106edeeb38

Pager should be disabled if pager.pager is empty (otherwise the output would
be silently lost.)

  $ hg log -l1 -q --config pager.pager=
  10:46106edeeb38

Pager with color enabled allows colors to come through by default,
even though stdout is no longer a tty.
  $ cat >> $HGRCPATH <<EOF
  > [ui]
  > color = always
  > [color]
  > mode = ansi
  > EOF
  $ hg log --limit 3
  paged! '\x1b[0;33mchangeset:   10:46106edeeb38\x1b[0m\n'
  paged! 'tag:         tip\n'
  paged! 'user:        test\n'
  paged! 'date:        Thu Jan 01 00:00:00 1970 +0000\n'
  paged! 'summary:     modify a 10\n'
  paged! '\n'
  paged! '\x1b[0;33mchangeset:   9:6dd8ea7dd621\x1b[0m\n'
  paged! 'user:        test\n'
  paged! 'date:        Thu Jan 01 00:00:00 1970 +0000\n'
  paged! 'summary:     modify a 9\n'
  paged! '\n'
  paged! '\x1b[0;33mchangeset:   8:cff05a6312fe\x1b[0m\n'
  paged! 'user:        test\n'
  paged! 'date:        Thu Jan 01 00:00:00 1970 +0000\n'
  paged! 'summary:     modify a 8\n'
  paged! '\n'

#if no-chg
An invalid pager command name is reported sensibly if we don't have to
use shell=True in the subprocess call:
  $ hg log --limit 3 --config pager.pager=this-command-better-never-exist
  missing pager command 'this-command-better-never-exist', skipping pager
  \x1b[0;33mchangeset:   10:46106edeeb38\x1b[0m (esc)
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     modify a 10
  
  \x1b[0;33mchangeset:   9:6dd8ea7dd621\x1b[0m (esc)
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     modify a 9
  
  \x1b[0;33mchangeset:   8:cff05a6312fe\x1b[0m (esc)
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     modify a 8
  
#endif

A complicated pager command gets worse behavior. Bonus points if you can
improve this.
  $ hg log --limit 3 \
  >   --config pager.pager='this-command-better-never-exist --seriously' \
  >  2>/dev/null || true

Pager works with shell aliases.

  $ cat >> $HGRCPATH <<EOF
  > [alias]
  > echoa = !echo a
  > EOF

  $ hg echoa
  a
BROKEN: should be paged
  $ hg --config pager.attend-echoa=yes echoa
  a

Pager works with hg aliases including environment variables.

  $ cat >> $HGRCPATH <<'EOF'
  > [alias]
  > printa = log -T "$A\n" -r 0
  > EOF

  $ A=1 hg --config pager.attend-printa=yes printa
  paged! '1\n'
  $ A=2 hg --config pager.attend-printa=yes printa
  paged! '2\n'

Something that's explicitly attended is still not paginated if the
pager is globally set to off using a flag:
  $ A=2 hg --config pager.attend-printa=yes printa --pager=no
  2

Pager should not override the exit code of other commands

  $ cat >> $TESTTMP/fortytwo.py <<'EOF'
  > from mercurial import commands, registrar
  > cmdtable = {}
  > command = registrar.command(cmdtable)
  > @command(b'fortytwo', [], 'fortytwo', norepo=True)
  > def fortytwo(ui, *opts):
  >     ui.write('42\n')
  >     return 42
  > EOF

  $ cat >> $HGRCPATH <<'EOF'
  > [extensions]
  > fortytwo = $TESTTMP/fortytwo.py
  > EOF

  $ hg fortytwo --pager=on
  paged! '42\n'
  [42]

A command that asks for paging using ui.pager() directly works:
  $ hg blame a
  paged! ' 0: a\n'
  paged! ' 1: a 1\n'
  paged! ' 2: a 2\n'
  paged! ' 3: a 3\n'
  paged! ' 4: a 4\n'
  paged! ' 5: a 5\n'
  paged! ' 6: a 6\n'
  paged! ' 7: a 7\n'
  paged! ' 8: a 8\n'
  paged! ' 9: a 9\n'
  paged! '10: a 10\n'
but not with HGPLAIN
  $ HGPLAIN=1 hg blame a
   0: a
   1: a 1
   2: a 2
   3: a 3
   4: a 4
   5: a 5
   6: a 6
   7: a 7
   8: a 8
   9: a 9
  10: a 10
explicit flags work too:
  $ hg blame --pager=no a
   0: a
   1: a 1
   2: a 2
   3: a 3
   4: a 4
   5: a 5
   6: a 6
   7: a 7
   8: a 8
   9: a 9
  10: a 10

A command with --output option:

  $ hg cat -r0 a
  paged! 'a\n'
  $ hg cat -r0 a --output=-
  paged! 'a\n'
  $ hg cat -r0 a --output=out
  $ rm out

Put annotate in the ignore list for pager:
  $ cat >> $HGRCPATH <<EOF
  > [pager]
  > ignore = annotate
  > EOF
  $ hg blame a
   0: a
   1: a 1
   2: a 2
   3: a 3
   4: a 4
   5: a 5
   6: a 6
   7: a 7
   8: a 8
   9: a 9
  10: a 10

During pushbuffer, pager should not start:
  $ cat > $TESTTMP/pushbufferpager.py <<EOF
  > def uisetup(ui):
  >     ui.pushbuffer()
  >     ui.pager('mycmd')
  >     ui.write('content\n')
  >     ui.write(ui.popbuffer())
  > EOF

  $ echo append >> a
  $ hg --config extensions.pushbuffer=$TESTTMP/pushbufferpager.py status --color=off
  content
  paged! 'M a\n'

Environment variables like LESS and LV are set automatically:
  $ cat > $TESTTMP/printlesslv.py <<EOF
  > from __future__ import absolute_import
  > import os
  > import sys
  > sys.stdin.read()
  > for name in ['LESS', 'LV']:
  >     sys.stdout.write(('%s=%s\n') % (name, os.environ.get(name, '-')))
  > sys.stdout.flush()
  > EOF

  $ cat >> $HGRCPATH <<EOF
  > [alias]
  > noop = log -r 0 -T ''
  > [ui]
  > formatted=1
  > [pager]
  > pager = $PYTHON $TESTTMP/printlesslv.py
  > EOF
  $ unset LESS
  $ unset LV
  $ hg noop --pager=on
  LESS=FRX
  LV=-c
  $ LESS=EFGH hg noop --pager=on
  LESS=EFGH
  LV=-c