view tests/test-parseindex2.py @ 37295:45b39c69fae0

wireproto: separate commands tables for version 1 and 2 commands

We can't easily reuse existing command handlers for version 2
commands because the response types will be different. e.g. many
commands return nodes encoded as hex. Our new wire protocol is
binary safe, so we'll wish to encode nodes as binary.

We /could/ teach each command handler to look at the protocol
handler and change behavior based on the version in use. However,
this would make logic a bit unwieldy over time and would make
it harder to design a unified protocol handler interface. I think
it's better to create a clean break between version 1 and version 2
of commands on the server.

What I imagine happening is we will have separate @wireprotocommand
functions for each protocol generation. Those functions will parse the
request, dispatch to a common function to process it, then generate
the response in its own, transport-specific manner.

This commit establishes a separate table for tracking version 1
commands from version 2 commands. The HTTP server pieces have been
updated to use this new table.

Most commands are marked as both version 1 and version 2, so there is
little practical impact to this change.

A side-effect of this change is we now rely on transport registration
in wireprototypes.TRANSPORTS and certain properties of the protocol
interface. So a test had to be updated to conform.

Differential Revision: https://phab.mercurial-scm.org/D2982

"""This unit test primarily tests parsers.parse_index2().

It also checks certain aspects of the parsers module as a whole.
"""

from __future__ import absolute_import, print_function

import struct
import subprocess
import sys

from mercurial.node import (
    nullid,
    nullrev,
)
from mercurial import (
    policy,
)

parsers = policy.importmod(r'parsers')

# original python implementation
def gettype(q):
    return int(q & 0xFFFF)

def offset_type(offset, type):
    return long(long(offset) << 16 | type)

indexformatng = ">Qiiiiii20s12x"

def py_parseindex(data, inline) :
    s = 64
    cache = None
    index = []
    nodemap = {nullid: nullrev}
    n = off = 0

    l = len(data) - s
    append = index.append
    if inline:
        cache = (0, data)
        while off <= l:
            e = struct.unpack(indexformatng, data[off:off + s])
            nodemap[e[7]] = n
            append(e)
            n += 1
            if e[1] < 0:
                break
            off += e[1] + s
    else:
        while off <= l:
            e = struct.unpack(indexformatng, data[off:off + s])
            nodemap[e[7]] = n
            append(e)
            n += 1
            off += s

    e = list(index[0])
    type = gettype(e[0])
    e[0] = offset_type(0, type)
    index[0] = tuple(e)

    # add the magic null revision at -1
    index.append((0, 0, 0, -1, -1, -1, -1, nullid))

    return index, cache

data_inlined = '\x00\x01\x00\x01\x00\x00\x00\x00\x00\x00\x01\x8c' \
    '\x00\x00\x04\x07\x00\x00\x00\x00\x00\x00\x15\x15\xff\xff\xff' \
    '\xff\xff\xff\xff\xff\xebG\x97\xb7\x1fB\x04\xcf\x13V\x81\tw\x1b' \
    'w\xdduR\xda\xc6\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00' \
    'x\x9c\x9d\x93?O\xc30\x10\xc5\xf7|\x8a\xdb\x9a\xa8m\x06\xd8*\x95' \
    '\x81B\xa1\xa2\xa2R\xcb\x86Pd\x9a\x0b5$vd_\x04\xfd\xf6\x9c\xff@' \
    '\x11!\x0b\xd9\xec\xf7\xbbw\xe7gG6\xad6\x04\xdaN\xc0\x92\xa0$)' \
    '\xb1\x82\xa2\xd1%\x16\xa4\x8b7\xa9\xca\xd4-\xb2Y\x02\xfc\xc9' \
    '\xcaS\xf9\xaeX\xed\xb6\xd77Q\x02\x83\xd4\x19\xf5--Y\xea\xe1W' \
    '\xab\xed\x10\xceR\x0f_\xdf\xdf\r\xe1,\xf5\xf0\xcb\xf5 \xceR\x0f' \
    '_\xdc\x0e\x0e\xc3R\x0f_\xae\x96\x9b!\x9e\xa5\x1e\xbf\xdb,\x06' \
    '\xc7q\x9a/\x88\x82\xc3B\xea\xb5\xb4TJ\x93\xb6\x82\x0e\xe16\xe6' \
    'KQ\xdb\xaf\xecG\xa3\xd1 \x01\xd3\x0b_^\xe8\xaa\xa0\xae\xad\xd1' \
    '&\xbef\x1bz\x08\xb0|\xc9Xz\x06\xf6Z\x91\x90J\xaa\x17\x90\xaa' \
    '\xd2\xa6\x11$5C\xcf\xba#\xa0\x03\x02*2\x92-\xfc\xb1\x94\xdf\xe2' \
    '\xae\xb8\'m\x8ey0^\x85\xd3\x82\xb4\xf0`:\x9c\x00\x8a\xfd\x01' \
    '\xb0\xc6\x86\x8b\xdd\xae\x80\xf3\xa9\x9fd\x16\n\x00R%\x1a\x06' \
    '\xe9\xd8b\x98\x1d\xf4\xf3+\x9bf\x01\xd8p\x1b\xf3.\xed\x9f^g\xc3' \
    '^\xd9W81T\xdb\xd5\x04sx|\xf2\xeb\xd6`%?x\xed"\x831\xbf\xf3\xdc' \
    'b\xeb%gaY\xe1\xad\x9f\xb9f\'1w\xa9\xa5a\x83s\x82J\xb98\xbc4\x8b' \
    '\x83\x00\x9f$z\xb8#\xa5\xb1\xdf\x98\xd9\xec\x1b\x89O\xe3Ts\x9a4' \
    '\x17m\x8b\xfc\x8f\xa5\x95\x9a\xfc\xfa\xed,\xe5|\xa1\xfe\x15\xb9' \
    '\xbc\xb2\x93\x1f\xf2\x95\xff\xdf,\x1a\xc5\xe7\x17*\x93Oz:>\x0e'

data_non_inlined = '\x00\x00\x00\x01\x00\x00\x00\x00\x00\x01D\x19' \
    '\x00\x07e\x12\x00\x00\x00\x00\x00\x00\x00\x00\xff\xff\xff\xff' \
    '\xff\xff\xff\xff\xd1\xf4\xbb\xb0\xbe\xfc\x13\xbd\x8c\xd3\x9d' \
    '\x0f\xcd\xd9;\x8c\x07\x8cJ/\x00\x00\x00\x00\x00\x00\x00\x00\x00' \
    '\x00\x00\x00\x00\x00\x00\x01D\x19\x00\x00\x00\x00\x00\xdf\x00' \
    '\x00\x01q\x00\x00\x00\x01\x00\x00\x00\x01\x00\x00\x00\x00\xff' \
    '\xff\xff\xff\xc1\x12\xb9\x04\x96\xa4Z1t\x91\xdfsJ\x90\xf0\x9bh' \
    '\x07l&\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00' \
    '\x00\x01D\xf8\x00\x00\x00\x00\x01\x1b\x00\x00\x01\xb8\x00\x00' \
    '\x00\x01\x00\x00\x00\x02\x00\x00\x00\x01\xff\xff\xff\xff\x02\n' \
    '\x0e\xc6&\xa1\x92\xae6\x0b\x02i\xfe-\xe5\xbao\x05\xd1\xe7\x00' \
    '\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x01F' \
    '\x13\x00\x00\x00\x00\x01\xec\x00\x00\x03\x06\x00\x00\x00\x01' \
    '\x00\x00\x00\x03\x00\x00\x00\x02\xff\xff\xff\xff\x12\xcb\xeby1' \
    '\xb6\r\x98B\xcb\x07\xbd`\x8f\x92\xd9\xc4\x84\xbdK\x00\x00\x00' \
    '\x00\x00\x00\x00\x00\x00\x00\x00\x00'

def parse_index2(data, inline):
    index, chunkcache = parsers.parse_index2(data, inline)
    return list(index), chunkcache

def importparsers(hexversion):
    """Import mercurial.parsers with the given sys.hexversion."""
    # The file parsers.c inspects sys.hexversion to determine the version
    # of the currently-running Python interpreter, so we monkey-patch
    # sys.hexversion to simulate using different versions.
    code = ("import sys; sys.hexversion=%s; "
            "import mercurial.cext.parsers" % hexversion)
    cmd = "python -c \"%s\"" % code
    # We need to do these tests inside a subprocess because parser.c's
    # version-checking code happens inside the module init function, and
    # when using reload() to reimport an extension module, "The init function
    # of extension modules is not called a second time"
    # (from http://docs.python.org/2/library/functions.html?#reload).
    p = subprocess.Popen(cmd, shell=True,
                         stdout=subprocess.PIPE, stderr=subprocess.STDOUT)
    return p.communicate()  # returns stdout, stderr

def printhexfail(testnumber, hexversion, stdout, expected):
    try:
        hexstring = hex(hexversion)
    except TypeError:
        hexstring = None
    print("FAILED: version test #%s with Python %s and patched "
          "sys.hexversion %r (%r):\n Expected %s but got:\n-->'%s'\n" %
          (testnumber, sys.version_info, hexversion, hexstring, expected,
           stdout))

def testversionokay(testnumber, hexversion):
    stdout, stderr = importparsers(hexversion)
    if stdout:
        printhexfail(testnumber, hexversion, stdout, expected="no stdout")

def testversionfail(testnumber, hexversion):
    stdout, stderr = importparsers(hexversion)
    # We include versionerrortext to distinguish from other ImportErrors.
    errtext = "ImportError: %s" % parsers.versionerrortext
    if errtext not in stdout:
        printhexfail(testnumber, hexversion, stdout,
                     expected="stdout to contain %r" % errtext)

def makehex(major, minor, micro):
    return int("%x%02x%02x00" % (major, minor, micro), 16)

def runversiontests():
    """Check the version-detection logic when importing parsers."""
    info = sys.version_info
    major, minor, micro = info[0], info[1], info[2]
    # Test same major-minor versions.
    testversionokay(1, makehex(major, minor, micro))
    testversionokay(2, makehex(major, minor, micro + 1))
    # Test different major-minor versions.
    testversionfail(3, makehex(major + 1, minor, micro))
    testversionfail(4, makehex(major, minor + 1, micro))
    testversionfail(5, "'foo'")

def runtest() :
    # Only test the version-detection logic if it is present.
    try:
        parsers.versionerrortext
    except AttributeError:
        pass
    else:
        runversiontests()

    # Check that parse_index2() raises TypeError on bad arguments.
    try:
        parse_index2(0, True)
    except TypeError:
        pass
    else:
        print("Expected to get TypeError.")

   # Check parsers.parse_index2() on an index file against the original
   # Python implementation of parseindex, both with and without inlined data.

    py_res_1 = py_parseindex(data_inlined, True)
    c_res_1 = parse_index2(data_inlined, True)

    py_res_2 = py_parseindex(data_non_inlined, False)
    c_res_2 = parse_index2(data_non_inlined, False)

    if py_res_1 != c_res_1:
        print("Parse index result (with inlined data) differs!")

    if py_res_2 != c_res_2:
        print("Parse index result (no inlined data) differs!")

    ix = parsers.parse_index2(data_inlined, True)[0]
    for i, r in enumerate(ix):
        if r[7] == nullid:
            i = -1
        try:
            if ix[r[7]] != i:
                print('Reverse lookup inconsistent for %r'
                    % r[7].encode('hex'))
        except TypeError:
            # pure version doesn't support this
            break

    print("done")

runtest()