view tests/test-pathconflicts-merge.t @ 37295:45b39c69fae0

wireproto: separate commands tables for version 1 and 2 commands

We can't easily reuse existing command handlers for version 2
commands because the response types will be different. e.g. many
commands return nodes encoded as hex. Our new wire protocol is
binary safe, so we'll wish to encode nodes as binary.

We /could/ teach each command handler to look at the protocol
handler and change behavior based on the version in use. However,
this would make logic a bit unwieldy over time and would make
it harder to design a unified protocol handler interface. I think
it's better to create a clean break between version 1 and version 2
of commands on the server.

What I imagine happening is we will have separate @wireprotocommand
functions for each protocol generation. Those functions will parse the
request, dispatch to a common function to process it, then generate
the response in its own, transport-specific manner.

This commit establishes a separate table for tracking version 1
commands from version 2 commands. The HTTP server pieces have been
updated to use this new table.

Most commands are marked as both version 1 and version 2, so there is
little practical impact to this change.

A side-effect of this change is we now rely on transport registration
in wireprototypes.TRANSPORTS and certain properties of the protocol
interface. So a test had to be updated to conform.

Differential Revision: https://phab.mercurial-scm.org/D2982

Path conflict checking is currently disabled by default because of issue5716.
Turn it on for this test.

  $ cat >> $HGRCPATH << EOF
  > [experimental]
  > merge.checkpathconflicts=True
  > EOF

  $ hg init repo
  $ cd repo
  $ echo base > base
  $ hg add base
  $ hg commit -m "base"
  $ hg bookmark -i base
  $ mkdir a
  $ echo 1 > a/b
  $ hg add a/b
  $ hg commit -m "file"
  $ hg bookmark -i file
  $ echo 2 > a/b
  $ hg commit -m "file2"
  $ hg bookmark -i file2
  $ hg up 0
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved

#if symlink
  $ mkdir a
  $ ln -s c a/b
  $ hg add a/b
  $ hg commit -m "link"
  created new head
#else
  $ hg import -q --bypass - <<EOF
  > # HG changeset patch
  > link
  > 
  > diff --git a/a/b b/a/b
  > new file mode 120000
  > --- /dev/null
  > +++ b/a/b
  > @@ -0,0 +1,1 @@
  > +c
  > \ No newline at end of file
  > EOF
  $ hg up -q
#endif

  $ hg bookmark -i link
  $ hg up 0
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ mkdir -p a/b/c
  $ echo 2 > a/b/c/d
  $ hg add a/b/c/d
  $ hg commit -m "dir"
  created new head
  $ hg bookmark -i dir

Merge - local file conflicts with remote directory

  $ hg up file
  1 files updated, 0 files merged, 1 files removed, 0 files unresolved
  (activating bookmark file)
  $ hg bookmark -i
  $ hg merge --verbose dir
  resolving manifests
  a/b: path conflict - a file or link has the same name as a directory
  the local file has been renamed to a/b~0ed027b96f31
  resolve manually then use 'hg resolve --mark a/b'
  moving a/b to a/b~0ed027b96f31
  getting a/b/c/d
  1 files updated, 0 files merged, 0 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg merge --abort' to abandon
  [1]
  $ hg status
  M a/b/c/d
  A a/b~0ed027b96f31
  R a/b
  $ hg resolve --all
  a/b: path conflict must be resolved manually
  $ hg forget a/b~0ed027b96f31 && rm a/b~0ed027b96f31
  $ hg resolve --mark a/b
  (no more unresolved files)
  $ hg commit -m "merge file and dir (deleted file)"

Merge - local symlink conflicts with remote directory

  $ hg up link
  1 files updated, 0 files merged, 1 files removed, 0 files unresolved
  (activating bookmark link)
  $ hg bookmark -i
  $ hg merge dir
  a/b: path conflict - a file or link has the same name as a directory
  the local file has been renamed to a/b~2ea68033e3be
  resolve manually then use 'hg resolve --mark a/b'
  1 files updated, 0 files merged, 0 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg merge --abort' to abandon
  [1]
  $ hg status
  M a/b/c/d
  A a/b~2ea68033e3be
  R a/b
  $ hg resolve --list
  P a/b
  $ hg resolve --all
  a/b: path conflict must be resolved manually
  $ hg mv a/b~2ea68033e3be a/b.old
  $ hg resolve --mark a/b
  (no more unresolved files)
  $ hg resolve --list
  R a/b
  $ hg commit -m "merge link and dir (renamed link)"

Merge - local directory conflicts with remote file or link

  $ hg up dir
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved
  (activating bookmark dir)
  $ hg bookmark -i
  $ hg merge file
  a/b: path conflict - a file or link has the same name as a directory
  the remote file has been renamed to a/b~0ed027b96f31
  resolve manually then use 'hg resolve --mark a/b'
  1 files updated, 0 files merged, 0 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg merge --abort' to abandon
  [1]
  $ hg status
  A a/b~0ed027b96f31
  $ hg resolve --all
  a/b: path conflict must be resolved manually
  $ hg mv a/b~0ed027b96f31 a/b/old-b
  $ hg resolve --mark a/b
  (no more unresolved files)
  $ hg commit -m "merge dir and file (move file into dir)"
  created new head
  $ hg merge file2
  merging a/b/old-b and a/b to a/b/old-b
  0 files updated, 1 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ cat a/b/old-b
  2
  $ hg commit -m "merge file2 (copytrace tracked rename)"
  $ hg merge link
  a/b: path conflict - a file or link has the same name as a directory
  the remote file has been renamed to a/b~2ea68033e3be
  resolve manually then use 'hg resolve --mark a/b'
  1 files updated, 0 files merged, 0 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg merge --abort' to abandon
  [1]
  $ hg mv a/b~2ea68033e3be a/b.old

#if symlink
  $ readlink.py a/b.old
  a/b.old -> c
#else
  $ cat a/b.old
  c (no-eol)
#endif

  $ hg resolve --mark a/b
  (no more unresolved files)
  $ hg commit -m "merge link (rename link)"