view tests/test-progress.t @ 37295:45b39c69fae0

wireproto: separate commands tables for version 1 and 2 commands

We can't easily reuse existing command handlers for version 2
commands because the response types will be different. e.g. many
commands return nodes encoded as hex. Our new wire protocol is
binary safe, so we'll wish to encode nodes as binary.

We /could/ teach each command handler to look at the protocol
handler and change behavior based on the version in use. However,
this would make logic a bit unwieldy over time and would make
it harder to design a unified protocol handler interface. I think
it's better to create a clean break between version 1 and version 2
of commands on the server.

What I imagine happening is we will have separate @wireprotocommand
functions for each protocol generation. Those functions will parse the
request, dispatch to a common function to process it, then generate
the response in its own, transport-specific manner.

This commit establishes a separate table for tracking version 1
commands from version 2 commands. The HTTP server pieces have been
updated to use this new table.

Most commands are marked as both version 1 and version 2, so there is
little practical impact to this change.

A side-effect of this change is we now rely on transport registration
in wireprototypes.TRANSPORTS and certain properties of the protocol
interface. So a test had to be updated to conform.

Differential Revision: https://phab.mercurial-scm.org/D2982

  $ cat > loop.py <<EOF
  > from __future__ import absolute_import
  > import time
  > from mercurial import commands, registrar
  > 
  > cmdtable = {}
  > command = registrar.command(cmdtable)
  > 
  > class incrementingtime(object):
  >     def __init__(self):
  >         self._time = 0.0
  >     def __call__(self):
  >         self._time += 0.25
  >         return self._time
  > time.time = incrementingtime()
  > 
  > @command(b'loop',
  >     [('', 'total', '', 'override for total'),
  >     ('', 'nested', False, 'show nested results'),
  >     ('', 'parallel', False, 'show parallel sets of results')],
  >     'hg loop LOOPS',
  >     norepo=True)
  > def loop(ui, loops, **opts):
  >     loops = int(loops)
  >     total = None
  >     if loops >= 0:
  >         total = loops
  >     if opts.get('total', None):
  >         total = int(opts.get('total'))
  >     nested = False
  >     if opts.get('nested', None):
  >         nested = True
  >     loops = abs(loops)
  > 
  >     for i in range(loops):
  >         ui.progress(topiclabel, i, getloopitem(i), 'loopnum', total)
  >         if opts.get('parallel'):
  >             ui.progress('other', i, 'other.%d' % i, 'othernum', total)
  >         if nested:
  >             nested_steps = 2
  >             if i and i % 4 == 0:
  >                 nested_steps = 5
  >             for j in range(nested_steps):
  >                 ui.progress(
  >                   'nested', j, 'nested.%d' % j, 'nestnum', nested_steps)
  >             ui.progress(
  >               'nested', None, 'nested.done', 'nestnum', nested_steps)
  >     ui.progress(topiclabel, None, 'loop.done', 'loopnum', total)
  > 
  > topiclabel = 'loop'
  > def getloopitem(i):
  >     return 'loop.%d' % i
  > 
  > EOF

  $ cp $HGRCPATH $HGRCPATH.orig
  $ echo "[extensions]" >> $HGRCPATH
  $ echo "progress=" >> $HGRCPATH
  $ echo "loop=`pwd`/loop.py" >> $HGRCPATH
  $ echo "[progress]" >> $HGRCPATH
  $ echo "format = topic bar number" >> $HGRCPATH
  $ echo "assume-tty=1" >> $HGRCPATH
  $ echo "width=60" >> $HGRCPATH

test default params, display nothing because of delay

  $ hg -y loop 3
  $ echo "delay=0" >> $HGRCPATH
  $ echo "refresh=0" >> $HGRCPATH

test with delay=0, refresh=0

  $ hg -y loop 3
  \r (no-eol) (esc)
  loop [                                                ] 0/3\r (no-eol) (esc)
  loop [===============>                                ] 1/3\r (no-eol) (esc)
  loop [===============================>                ] 2/3\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
no progress with --quiet
  $ hg -y loop 3 --quiet

test plain mode exception
  $ HGPLAINEXCEPT=progress hg -y loop 1
  \r (no-eol) (esc)
  loop [                                                ] 0/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)

test nested short-lived topics (which shouldn't display with nestdelay):

  $ hg -y loop 3 --nested
  \r (no-eol) (esc)
  loop [                                                ] 0/3\r (no-eol) (esc)
  loop [===============>                                ] 1/3\r (no-eol) (esc)
  loop [===============================>                ] 2/3\r (no-eol) (esc)
                                                              \r (no-eol) (esc)

Test nested long-lived topic which has the same name as a short-lived
peer. We shouldn't get stuck showing the short-lived inner steps, and
should go back to skipping the inner steps when the slow nested step
finishes.

  $ hg -y loop 7 --nested
  \r (no-eol) (esc)
  loop [                                                ] 0/7\r (no-eol) (esc)
  loop [=====>                                          ] 1/7\r (no-eol) (esc)
  loop [============>                                   ] 2/7\r (no-eol) (esc)
  loop [===================>                            ] 3/7\r (no-eol) (esc)
  loop [==========================>                     ] 4/7\r (no-eol) (esc)
  nested [==========================>                   ] 3/5\r (no-eol) (esc)
  nested [===================================>          ] 4/5\r (no-eol) (esc)
  loop [=================================>              ] 5/7\r (no-eol) (esc)
  loop [========================================>       ] 6/7\r (no-eol) (esc)
                                                              \r (no-eol) (esc)


  $ hg --config progress.changedelay=0 -y loop 3 --nested
  \r (no-eol) (esc)
  loop [                                                ] 0/3\r (no-eol) (esc)
  nested [                                              ] 0/2\r (no-eol) (esc)
  nested [======================>                       ] 1/2\r (no-eol) (esc)
  loop [===============>                                ] 1/3\r (no-eol) (esc)
  nested [                                              ] 0/2\r (no-eol) (esc)
  nested [======================>                       ] 1/2\r (no-eol) (esc)
  loop [===============================>                ] 2/3\r (no-eol) (esc)
  nested [                                              ] 0/2\r (no-eol) (esc)
  nested [======================>                       ] 1/2\r (no-eol) (esc)
                                                              \r (no-eol) (esc)


test two topics being printed in parallel (as when we're doing a local
--pull clone, where you get the unbundle and bundle progress at the
same time):
  $ hg loop 3 --parallel
  \r (no-eol) (esc)
  loop [                                                ] 0/3\r (no-eol) (esc)
  loop [===============>                                ] 1/3\r (no-eol) (esc)
  loop [===============================>                ] 2/3\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
test refresh is taken in account

  $ hg -y --config progress.refresh=100 loop 3

test format options 1

  $ hg -y --config 'progress.format=number topic item+2' loop 2
  \r (no-eol) (esc)
  0/2 loop lo\r (no-eol) (esc)
  1/2 loop lo\r (no-eol) (esc)
                                                              \r (no-eol) (esc)

test format options 2

  $ hg -y --config 'progress.format=number item-3 bar' loop 2
  \r (no-eol) (esc)
  0/2 p.0 [                                                 ]\r (no-eol) (esc)
  1/2 p.1 [=======================>                         ]\r (no-eol) (esc)
                                                              \r (no-eol) (esc)

test format options and indeterminate progress

  $ hg -y --config 'progress.format=number item bar' loop -- -2
  \r (no-eol) (esc)
  0 loop.0               [ <=>                              ]\r (no-eol) (esc)
  1 loop.1               [  <=>                             ]\r (no-eol) (esc)
                                                              \r (no-eol) (esc)

make sure things don't fall over if count > total

  $ hg -y loop --total 4 6
  \r (no-eol) (esc)
  loop [                                                ] 0/4\r (no-eol) (esc)
  loop [===========>                                    ] 1/4\r (no-eol) (esc)
  loop [=======================>                        ] 2/4\r (no-eol) (esc)
  loop [===================================>            ] 3/4\r (no-eol) (esc)
  loop [===============================================>] 4/4\r (no-eol) (esc)
  loop [ <=>                                            ] 5/4\r (no-eol) (esc)
                                                              \r (no-eol) (esc)

test immediate progress completion

  $ hg -y loop 0

test delay time estimates

#if no-chg

  $ cp $HGRCPATH.orig $HGRCPATH
  $ echo "[extensions]" >> $HGRCPATH
  $ echo "mocktime=$TESTDIR/mocktime.py" >> $HGRCPATH
  $ echo "progress=" >> $HGRCPATH
  $ echo "loop=`pwd`/loop.py" >> $HGRCPATH
  $ echo "[progress]" >> $HGRCPATH
  $ echo "assume-tty=1" >> $HGRCPATH
  $ echo "delay=25" >> $HGRCPATH
  $ echo "width=60" >> $HGRCPATH

  $ MOCKTIME=11 hg -y loop 8
  \r (no-eol) (esc)
  loop [=========>                                ] 2/8 1m07s\r (no-eol) (esc)
  loop [===============>                            ] 3/8 56s\r (no-eol) (esc)
  loop [=====================>                      ] 4/8 45s\r (no-eol) (esc)
  loop [==========================>                 ] 5/8 34s\r (no-eol) (esc)
  loop [================================>           ] 6/8 23s\r (no-eol) (esc)
  loop [=====================================>      ] 7/8 12s\r (no-eol) (esc)
                                                              \r (no-eol) (esc)

  $ MOCKTIME=10000 hg -y loop 4
  \r (no-eol) (esc)
  loop [                                                ] 0/4\r (no-eol) (esc)
  loop [=========>                                ] 1/4 8h21m\r (no-eol) (esc)
  loop [====================>                     ] 2/4 5h34m\r (no-eol) (esc)
  loop [==============================>           ] 3/4 2h47m\r (no-eol) (esc)
                                                              \r (no-eol) (esc)

  $ MOCKTIME=1000000 hg -y loop 4
  \r (no-eol) (esc)
  loop [                                                ] 0/4\r (no-eol) (esc)
  loop [=========>                                ] 1/4 5w00d\r (no-eol) (esc)
  loop [====================>                     ] 2/4 3w03d\r (no-eol) (esc)
  loop [=============================>           ] 3/4 11d14h\r (no-eol) (esc)
                                                              \r (no-eol) (esc)


  $ MOCKTIME=14000000 hg -y loop 4
  \r (no-eol) (esc)
  loop [                                                ] 0/4\r (no-eol) (esc)
  loop [=========>                                ] 1/4 1y18w\r (no-eol) (esc)
  loop [===================>                     ] 2/4 46w03d\r (no-eol) (esc)
  loop [=============================>           ] 3/4 23w02d\r (no-eol) (esc)
                                                              \r (no-eol) (esc)

Non-linear progress:

  $ MOCKTIME='20 20 20 20 20 20 20 20 20 20 500 500 500 500 500 20 20 20 20 20' hg -y loop 20
  \r (no-eol) (esc)
  loop [=>                                      ]  1/20 6m21s\r (no-eol) (esc)
  loop [===>                                    ]  2/20 6m01s\r (no-eol) (esc)
  loop [=====>                                  ]  3/20 5m41s\r (no-eol) (esc)
  loop [=======>                                ]  4/20 5m21s\r (no-eol) (esc)
  loop [=========>                              ]  5/20 5m01s\r (no-eol) (esc)
  loop [===========>                            ]  6/20 4m41s\r (no-eol) (esc)
  loop [=============>                          ]  7/20 4m21s\r (no-eol) (esc)
  loop [===============>                        ]  8/20 4m01s\r (no-eol) (esc)
  loop [================>                      ]  9/20 25m40s\r (no-eol) (esc)
  loop [===================>                    ] 10/20 1h06m\r (no-eol) (esc)
  loop [=====================>                  ] 11/20 1h13m\r (no-eol) (esc)
  loop [=======================>                ] 12/20 1h07m\r (no-eol) (esc)
  loop [========================>              ] 13/20 58m19s\r (no-eol) (esc)
  loop [===========================>            ] 14/20 7m09s\r (no-eol) (esc)
  loop [=============================>          ] 15/20 3m38s\r (no-eol) (esc)
  loop [===============================>        ] 16/20 2m15s\r (no-eol) (esc)
  loop [=================================>      ] 17/20 1m27s\r (no-eol) (esc)
  loop [====================================>     ] 18/20 52s\r (no-eol) (esc)
  loop [======================================>   ] 19/20 25s\r (no-eol) (esc)
                                                              \r (no-eol) (esc)

Time estimates should not fail when there's no end point:
  $ MOCKTIME=11 hg -y loop -- -4
  \r (no-eol) (esc)
  loop [ <=>                                              ] 2\r (no-eol) (esc)
  loop [  <=>                                             ] 3\r (no-eol) (esc)
                                                              \r (no-eol) (esc)

#endif

test line trimming by '[progress] width', when progress topic contains
multi-byte characters, of which length of byte sequence and columns in
display are different from each other.

  $ cp $HGRCPATH.orig $HGRCPATH
  $ cat >> $HGRCPATH <<EOF
  > [extensions]
  > progress=
  > loop=`pwd`/loop.py
  > [progress]
  > assume-tty = 1
  > delay = 0
  > refresh = 0
  > EOF

  $ rm -f loop.pyc
  $ cat >> loop.py <<EOF
  > # use non-ascii characters as topic label of progress
  > # 2 x 4 = 8 columns, but 3 x 4 = 12 bytes
  > topiclabel = u'\u3042\u3044\u3046\u3048'.encode('utf-8')
  > EOF

  $ cat >> $HGRCPATH <<EOF
  > [progress]
  > format = topic number
  > width= 12
  > EOF

  $ hg --encoding utf-8 -y loop --total 3 3
  \r (no-eol) (esc)
  \xe3\x81\x82\xe3\x81\x84\xe3\x81\x86\xe3\x81\x88 0/3\r (no-eol) (esc)
  \xe3\x81\x82\xe3\x81\x84\xe3\x81\x86\xe3\x81\x88 1/3\r (no-eol) (esc)
  \xe3\x81\x82\xe3\x81\x84\xe3\x81\x86\xe3\x81\x88 2/3\r (no-eol) (esc)
              \r (no-eol) (esc)

test calculation of bar width, when progress topic contains multi-byte
characters, of which length of byte sequence and columns in display
are different from each other.

  $ cat >> $HGRCPATH <<EOF
  > [progress]
  > format = topic bar
  > width= 21
  > # progwidth should be 9 (= 21 - (8+1) - 3)
  > EOF

  $ hg --encoding utf-8 -y loop --total 3 3
  \r (no-eol) (esc)
  \xe3\x81\x82\xe3\x81\x84\xe3\x81\x86\xe3\x81\x88 [         ]\r (no-eol) (esc)
  \xe3\x81\x82\xe3\x81\x84\xe3\x81\x86\xe3\x81\x88 [==>      ]\r (no-eol) (esc)
  \xe3\x81\x82\xe3\x81\x84\xe3\x81\x86\xe3\x81\x88 [=====>   ]\r (no-eol) (esc)
                       \r (no-eol) (esc)

test trimming progress items, when they contain multi-byte characters,
of which length of byte sequence and columns in display are different
from each other.

  $ rm -f loop.pyc
  $ rm -Rf __pycache__
  $ cat >> loop.py <<EOF
  > # use non-ascii characters as loop items of progress
  > loopitems = [
  >     u'\u3042\u3044'.encode('utf-8'), # 2 x 2 = 4 columns
  >     u'\u3042\u3044\u3046'.encode('utf-8'), # 2 x 3 = 6 columns
  >     u'\u3042\u3044\u3046\u3048'.encode('utf-8'), # 2 x 4 = 8 columns
  > ]
  > def getloopitem(i):
  >     return loopitems[i % len(loopitems)]
  > EOF

  $ cat >> $HGRCPATH <<EOF
  > [progress]
  > # trim at tail side
  > format = item+6
  > EOF

  $ hg --encoding utf-8 -y loop --total 3 3
  \r (no-eol) (esc)
  \xe3\x81\x82\xe3\x81\x84  \r (no-eol) (esc)
  \xe3\x81\x82\xe3\x81\x84\xe3\x81\x86\r (no-eol) (esc)
  \xe3\x81\x82\xe3\x81\x84\xe3\x81\x86\r (no-eol) (esc)
                       \r (no-eol) (esc)

  $ cat >> $HGRCPATH <<EOF
  > [progress]
  > # trim at left side
  > format = item-6
  > EOF

  $ hg --encoding utf-8 -y loop --total 3 3
  \r (no-eol) (esc)
  \xe3\x81\x82\xe3\x81\x84  \r (no-eol) (esc)
  \xe3\x81\x82\xe3\x81\x84\xe3\x81\x86\r (no-eol) (esc)
  \xe3\x81\x84\xe3\x81\x86\xe3\x81\x88\r (no-eol) (esc)
                       \r (no-eol) (esc)