wireproto: separate commands tables for version 1 and 2 commands
We can't easily reuse existing command handlers for version 2
commands because the response types will be different. e.g. many
commands return nodes encoded as hex. Our new wire protocol is
binary safe, so we'll wish to encode nodes as binary.
We /could/ teach each command handler to look at the protocol
handler and change behavior based on the version in use. However,
this would make logic a bit unwieldy over time and would make
it harder to design a unified protocol handler interface. I think
it's better to create a clean break between version 1 and version 2
of commands on the server.
What I imagine happening is we will have separate @wireprotocommand
functions for each protocol generation. Those functions will parse the
request, dispatch to a common function to process it, then generate
the response in its own, transport-specific manner.
This commit establishes a separate table for tracking version 1
commands from version 2 commands. The HTTP server pieces have been
updated to use this new table.
Most commands are marked as both version 1 and version 2, so there is
little practical impact to this change.
A side-effect of this change is we now rely on transport registration
in wireprototypes.TRANSPORTS and certain properties of the protocol
interface. So a test had to be updated to conform.
Differential Revision: https://phab.mercurial-scm.org/D2982
$ hg init t
$ cd t
$ echo 1 > foo
$ hg ci -Am1 # 0
adding foo
$ hg branch branchA
marked working directory as branch branchA
(branches are permanent and global, did you want a bookmark?)
$ echo a1 > foo
$ hg ci -ma1 # 1
$ cd ..
$ hg init tt
$ cd tt
$ hg pull ../t
pulling from ../t
requesting all changes
adding changesets
adding manifests
adding file changes
added 2 changesets with 2 changes to 1 files
new changesets 495a0ec48aaf:50e089d141b7
(run 'hg update' to get a working copy)
$ hg up branchA
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cd ../t
$ echo a2 > foo
$ hg ci -ma2 # 2
Create branch B:
$ hg up 0
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg branch branchB
marked working directory as branch branchB
$ echo b1 > foo
$ hg ci -mb1 # 3
$ cd ../tt
A new branch is there
$ hg pull -u ../t
pulling from ../t
searching for changes
adding changesets
adding manifests
adding file changes
added 2 changesets with 2 changes to 1 files (+1 heads)
new changesets 9f878dea0b96:5be59ce5067b
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
Develop both branches:
$ cd ../t
$ hg up branchA
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ echo a3 > foo
$ hg ci -ma3 # 4
$ hg up branchB
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ echo b2 > foo
$ hg ci -mb2 # 5
$ cd ../tt
Should succeed, no new heads:
$ hg pull -u ../t
pulling from ../t
searching for changes
adding changesets
adding manifests
adding file changes
added 2 changesets with 2 changes to 1 files
new changesets 7c8fe7e20c32:453e93fa00a5
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
Add a head on other branch:
$ cd ../t
$ hg up branchA
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ echo a4 > foo
$ hg ci -ma4 # 6
$ hg up branchB
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ echo b3.1 > foo
$ hg ci -m b3.1 # 7
$ hg up 5
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ echo b3.2 > foo
$ hg ci -m b3.2 # 8
created new head
$ cd ../tt
Should succeed because there is only one head on our branch:
$ hg pull -u ../t
pulling from ../t
searching for changes
adding changesets
adding manifests
adding file changes
added 3 changesets with 3 changes to 1 files (+1 heads)
new changesets da3a8a0161c6:b61cab8fe4e8
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cd ../t
$ hg up -C branchA
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ echo a5.1 > foo
$ hg ci -ma5.1 # 9
$ hg up 6
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ echo a5.2 > foo
$ hg ci -ma5.2 # 10
created new head
$ hg up 7
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ echo b4.1 > foo
$ hg ci -m b4.1 # 11
$ hg up -C 8
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ echo b4.2 > foo
$ hg ci -m b4.2 # 12
$ cd ../tt
$ hg pull -u ../t
pulling from ../t
searching for changes
adding changesets
adding manifests
adding file changes
added 4 changesets with 4 changes to 1 files (+1 heads)
new changesets 0c4d148ae29e:ecfc3f4a6fd9
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
updated to "d740e1a584e7: a5.2"
1 other heads for branch "branchA"
Make changes on new branch on tt
$ hg up 6
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg branch branchC
marked working directory as branch branchC
$ echo b1 > bar
$ hg ci -Am "commit on branchC on tt"
adding bar
Make changes on default branch on t
$ cd ../t
$ hg up -C default
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ echo a1 > bar
$ hg ci -Am "commit on default on t"
adding bar
Pull branchC from tt
$ hg pull ../tt
pulling from ../tt
searching for changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files (+1 heads)
new changesets 7d8ffa4c0b22
(run 'hg heads' to see heads)
Make changes on default and branchC on tt
$ cd ../tt
$ hg pull ../t
pulling from ../t
searching for changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files (+1 heads)
new changesets 2b94b54b6b5f
(run 'hg heads' to see heads)
$ hg up -C default
2 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ echo a1 > bar1
$ hg ci -Am "commit on default on tt"
adding bar1
$ hg up branchC
2 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ echo a1 > bar2
$ hg ci -Am "commit on branchC on tt"
adding bar2
Make changes on default and branchC on t
$ cd ../t
$ hg up default
0 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ echo a1 > bar3
$ hg ci -Am "commit on default on t"
adding bar3
$ hg up branchC
2 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ echo a1 > bar4
$ hg ci -Am "commit on branchC on tt"
adding bar4
Pull from tt
$ hg pull ../tt
pulling from ../tt
searching for changes
adding changesets
adding manifests
adding file changes
added 2 changesets with 2 changes to 2 files (+2 heads)
new changesets eed40c14b407:e634733b0309
(run 'hg heads .' to see heads, 'hg merge' to merge)
$ cd ..