view rust/rhg/src/error.rs @ 48454:473af5cbc209

rhg: Add support for `rhg status --copies`

Copy sources are collected during `status()` rather than after the fact like
in Python, because `status()` takes a `&mut` exclusive reference to the dirstate map
(in order to potentially mutate it for directory mtimes) and returns `Cow<'_, HgPath>`
that borrow the dirstate map.

Even though with `Cow` only some shared borrows remain, the still extend the same
lifetime of the initial `&mut` so the dirstate map cannot be borrowed again
to access copy sources after the fact:

https://doc.rust-lang.org/nomicon/lifetime-mismatch.html#limits-of-lifetimes

Additionally, collecting copy sources during the dirstate tree traversal that
`status()` already does avoids the cost of another traversal or other lookups
(though I haven’t benchmarked that cost).

Differential Revision: https://phab.mercurial-scm.org/D11899

use crate::ui::utf8_to_local;
use crate::ui::UiError;
use crate::NoRepoInCwdError;
use format_bytes::format_bytes;
use hg::config::{ConfigError, ConfigParseError, ConfigValueParseError};
use hg::dirstate_tree::on_disk::DirstateV2ParseError;
use hg::errors::HgError;
use hg::exit_codes;
use hg::repo::RepoError;
use hg::revlog::revlog::RevlogError;
use hg::utils::files::get_bytes_from_path;
use hg::{DirstateError, DirstateMapError, StatusError};
use std::convert::From;

/// The kind of command error
#[derive(Debug)]
pub enum CommandError {
    /// Exit with an error message and "standard" failure exit code.
    Abort {
        message: Vec<u8>,
        detailed_exit_code: exit_codes::ExitCode,
    },

    /// Exit with a failure exit code but no message.
    Unsuccessful,

    /// Encountered something (such as a CLI argument, repository layout, …)
    /// not supported by this version of `rhg`. Depending on configuration
    /// `rhg` may attempt to silently fall back to Python-based `hg`, which
    /// may or may not support this feature.
    UnsupportedFeature { message: Vec<u8> },
}

impl CommandError {
    pub fn abort(message: impl AsRef<str>) -> Self {
        CommandError::abort_with_exit_code(message, exit_codes::ABORT)
    }

    pub fn abort_with_exit_code(
        message: impl AsRef<str>,
        detailed_exit_code: exit_codes::ExitCode,
    ) -> Self {
        CommandError::Abort {
            // TODO: bytes-based (instead of Unicode-based) formatting
            // of error messages to handle non-UTF-8 filenames etc:
            // https://www.mercurial-scm.org/wiki/EncodingStrategy#Mixing_output
            message: utf8_to_local(message.as_ref()).into(),
            detailed_exit_code: detailed_exit_code,
        }
    }

    pub fn unsupported(message: impl AsRef<str>) -> Self {
        CommandError::UnsupportedFeature {
            message: utf8_to_local(message.as_ref()).into(),
        }
    }
}

/// For now we don’t differenciate between invalid CLI args and valid for `hg`
/// but not supported yet by `rhg`.
impl From<clap::Error> for CommandError {
    fn from(error: clap::Error) -> Self {
        CommandError::unsupported(error.to_string())
    }
}

impl From<HgError> for CommandError {
    fn from(error: HgError) -> Self {
        match error {
            HgError::UnsupportedFeature(message) => {
                CommandError::unsupported(message)
            }
            HgError::Abort {
                message,
                detailed_exit_code,
            } => {
                CommandError::abort_with_exit_code(message, detailed_exit_code)
            }
            _ => CommandError::abort(error.to_string()),
        }
    }
}

impl From<ConfigValueParseError> for CommandError {
    fn from(error: ConfigValueParseError) -> Self {
        CommandError::abort_with_exit_code(
            error.to_string(),
            exit_codes::CONFIG_ERROR_ABORT,
        )
    }
}

impl From<UiError> for CommandError {
    fn from(_error: UiError) -> Self {
        // If we already failed writing to stdout or stderr,
        // writing an error message to stderr about it would be likely to fail
        // too.
        CommandError::abort("")
    }
}

impl From<RepoError> for CommandError {
    fn from(error: RepoError) -> Self {
        match error {
            RepoError::NotFound { at } => CommandError::Abort {
                message: format_bytes!(
                    b"abort: repository {} not found",
                    get_bytes_from_path(at)
                ),
                detailed_exit_code: exit_codes::ABORT,
            },
            RepoError::ConfigParseError(error) => error.into(),
            RepoError::Other(error) => error.into(),
        }
    }
}

impl<'a> From<&'a NoRepoInCwdError> for CommandError {
    fn from(error: &'a NoRepoInCwdError) -> Self {
        let NoRepoInCwdError { cwd } = error;
        CommandError::Abort {
            message: format_bytes!(
                b"abort: no repository found in '{}' (.hg not found)!",
                get_bytes_from_path(cwd)
            ),
            detailed_exit_code: exit_codes::ABORT,
        }
    }
}

impl From<ConfigError> for CommandError {
    fn from(error: ConfigError) -> Self {
        match error {
            ConfigError::Parse(error) => error.into(),
            ConfigError::Other(error) => error.into(),
        }
    }
}

impl From<ConfigParseError> for CommandError {
    fn from(error: ConfigParseError) -> Self {
        let ConfigParseError {
            origin,
            line,
            message,
        } = error;
        let line_message = if let Some(line_number) = line {
            format_bytes!(b":{}", line_number.to_string().into_bytes())
        } else {
            Vec::new()
        };
        CommandError::Abort {
            message: format_bytes!(
                b"config error at {}{}: {}",
                origin,
                line_message,
                message
            ),
            detailed_exit_code: exit_codes::CONFIG_ERROR_ABORT,
        }
    }
}

impl From<(RevlogError, &str)> for CommandError {
    fn from((err, rev): (RevlogError, &str)) -> CommandError {
        match err {
            RevlogError::WDirUnsupported => CommandError::abort(
                "abort: working directory revision cannot be specified",
            ),
            RevlogError::InvalidRevision => CommandError::abort(format!(
                "abort: invalid revision identifier: {}",
                rev
            )),
            RevlogError::AmbiguousPrefix => CommandError::abort(format!(
                "abort: ambiguous revision identifier: {}",
                rev
            )),
            RevlogError::Other(error) => error.into(),
        }
    }
}

impl From<StatusError> for CommandError {
    fn from(error: StatusError) -> Self {
        CommandError::abort(format!("{}", error))
    }
}

impl From<DirstateMapError> for CommandError {
    fn from(error: DirstateMapError) -> Self {
        CommandError::abort(format!("{}", error))
    }
}

impl From<DirstateError> for CommandError {
    fn from(error: DirstateError) -> Self {
        match error {
            DirstateError::Common(error) => error.into(),
            DirstateError::Map(error) => error.into(),
        }
    }
}

impl From<DirstateV2ParseError> for CommandError {
    fn from(error: DirstateV2ParseError) -> Self {
        HgError::from(error).into()
    }
}