view hgext/relink.py @ 13802:49b5a1aaf726

bugzilla: add modified XMLRPC mode that uses email to send bug comments.

If Bugzilla has its email interface configured, an email can be used
to update bugs. If the From: address in the email matches a valid user
email, Bugzillas make the update as that user. So comments attached to a
bug appear under the name of the user making the change, and the user
does not receive email about the change, exactly as if they had made
the change via the web interface.

So add a modified XMLRPC mode that uses email to modify bugs. The format
of the mails is documented in the Bugzilla email_in.pl specification.
Briefly, initial non-blank lines in the message body starting
'@<field> = <value> modify bug fields. A blank line signals the end of
the command lines, and the rest of the message is used as bug comment.

Invoke the same Mercurial user to Bugzilla user email mapping
currently used in the MySQL mode.

All other processing - checking the bug numbers, checking user ids, etc.
continues to be done via XMLRPC.

# Mercurial extension to provide 'hg relink' command
#
# Copyright (C) 2007 Brendan Cully <[e-mail]>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.

"""recreates hardlinks between repository clones"""

from mercurial import hg, util
from mercurial.i18n import _
import os, stat

def relink(ui, repo, origin=None, **opts):
    """recreate hardlinks between two repositories

    When repositories are cloned locally, their data files will be
    hardlinked so that they only use the space of a single repository.

    Unfortunately, subsequent pulls into either repository will break
    hardlinks for any files touched by the new changesets, even if
    both repositories end up pulling the same changes.

    Similarly, passing --rev to "hg clone" will fail to use any
    hardlinks, falling back to a complete copy of the source
    repository.

    This command lets you recreate those hardlinks and reclaim that
    wasted space.

    This repository will be relinked to share space with ORIGIN, which
    must be on the same local disk. If ORIGIN is omitted, looks for
    "default-relink", then "default", in [paths].

    Do not attempt any read operations on this repository while the
    command is running. (Both repositories will be locked against
    writes.)
    """
    if not hasattr(util, 'samefile') or not hasattr(util, 'samedevice'):
        raise util.Abort(_('hardlinks are not supported on this system'))
    src = hg.repository(
        hg.remoteui(repo, opts),
        ui.expandpath(origin or 'default-relink', origin or 'default'))
    if not src.local():
        raise util.Abort(_('must specify local origin repository'))
    ui.status(_('relinking %s to %s\n') % (src.store.path, repo.store.path))
    if repo.root == src.root:
        ui.status(_('there is nothing to relink\n'))
        return

    locallock = repo.lock()
    try:
        remotelock = src.lock()
        try:
            candidates = sorted(collect(src, ui))
            targets = prune(candidates, src.store.path, repo.store.path, ui)
            do_relink(src.store.path, repo.store.path, targets, ui)
        finally:
            remotelock.release()
    finally:
        locallock.release()

def collect(src, ui):
    seplen = len(os.path.sep)
    candidates = []
    live = len(src['tip'].manifest())
    # Your average repository has some files which were deleted before
    # the tip revision. We account for that by assuming that there are
    # 3 tracked files for every 2 live files as of the tip version of
    # the repository.
    #
    # mozilla-central as of 2010-06-10 had a ratio of just over 7:5.
    total = live * 3 // 2
    src = src.store.path
    pos = 0
    ui.status(_("tip has %d files, estimated total number of files: %s\n")
              % (live, total))
    for dirpath, dirnames, filenames in os.walk(src):
        dirnames.sort()
        relpath = dirpath[len(src) + seplen:]
        for filename in sorted(filenames):
            if not filename[-2:] in ('.d', '.i'):
                continue
            st = os.stat(os.path.join(dirpath, filename))
            if not stat.S_ISREG(st.st_mode):
                continue
            pos += 1
            candidates.append((os.path.join(relpath, filename), st))
            ui.progress(_('collecting'), pos, filename, _('files'), total)

    ui.progress(_('collecting'), None)
    ui.status(_('collected %d candidate storage files\n') % len(candidates))
    return candidates

def prune(candidates, src, dst, ui):
    def linkfilter(src, dst, st):
        try:
            ts = os.stat(dst)
        except OSError:
            # Destination doesn't have this file?
            return False
        if util.samefile(src, dst):
            return False
        if not util.samedevice(src, dst):
            # No point in continuing
            raise util.Abort(
                _('source and destination are on different devices'))
        if st.st_size != ts.st_size:
            return False
        return st

    targets = []
    total = len(candidates)
    pos = 0
    for fn, st in candidates:
        pos += 1
        srcpath = os.path.join(src, fn)
        tgt = os.path.join(dst, fn)
        ts = linkfilter(srcpath, tgt, st)
        if not ts:
            ui.debug(_('not linkable: %s\n') % fn)
            continue
        targets.append((fn, ts.st_size))
        ui.progress(_('pruning'), pos, fn, _('files'), total)

    ui.progress(_('pruning'), None)
    ui.status(_('pruned down to %d probably relinkable files\n') % len(targets))
    return targets

def do_relink(src, dst, files, ui):
    def relinkfile(src, dst):
        bak = dst + '.bak'
        os.rename(dst, bak)
        try:
            util.os_link(src, dst)
        except OSError:
            os.rename(bak, dst)
            raise
        os.remove(bak)

    CHUNKLEN = 65536
    relinked = 0
    savedbytes = 0

    pos = 0
    total = len(files)
    for f, sz in files:
        pos += 1
        source = os.path.join(src, f)
        tgt = os.path.join(dst, f)
        # Binary mode, so that read() works correctly, especially on Windows
        sfp = file(source, 'rb')
        dfp = file(tgt, 'rb')
        sin = sfp.read(CHUNKLEN)
        while sin:
            din = dfp.read(CHUNKLEN)
            if sin != din:
                break
            sin = sfp.read(CHUNKLEN)
        sfp.close()
        dfp.close()
        if sin:
            ui.debug(_('not linkable: %s\n') % f)
            continue
        try:
            relinkfile(source, tgt)
            ui.progress(_('relinking'), pos, f, _('files'), total)
            relinked += 1
            savedbytes += sz
        except OSError, inst:
            ui.warn('%s: %s\n' % (tgt, str(inst)))

    ui.progress(_('relinking'), None)

    ui.status(_('relinked %d files (%s reclaimed)\n') %
              (relinked, util.bytecount(savedbytes)))

cmdtable = {
    'relink': (
        relink,
        [],
        _('[ORIGIN]')
    )
}