config: explicitly track the use of the standard default value
We introduce a small object used to detect that no specific default value has
been passed to 'ui.config'. We need this explicit special value since "None" is
a valid and common default value.
The end goal here is to make progress on a centralised and explicit declaration
of the available config option. A first good usecase for this are "default"
value. Before starting looking further down this alley we needs to rework the
handling of default value in the 'ui' object to have all configxyz methods going
through the same logic. This is the first changeset on this trek.
$ cat >> $HGRCPATH <<EOF
> [extensions]
> rebase=
> histedit=
>
> [alias]
> tglog = log -G --template "{rev}: '{desc}' {branches}\n"
> EOF
$ hg init a
$ cd a
$ echo C1 > C1
$ hg ci -Am C1
adding C1
$ echo C2 > C2
$ hg ci -Am C2
adding C2
$ cd ..
$ hg clone a b
updating to branch default
2 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg clone a c
updating to branch default
2 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cd b
$ echo L1 > L1
$ hg ci -Am L1
adding L1
$ cd ../a
$ echo R1 > R1
$ hg ci -Am R1
adding R1
$ cd ../b
Now b has one revision to be pulled from a:
$ hg pull --rebase
pulling from $TESTTMP/a (glob)
searching for changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files (+1 heads)
rebasing 2:ff8d69a621f9 "L1"
saved backup bundle to $TESTTMP/b/.hg/strip-backup/ff8d69a621f9-160fa373-backup.hg (glob)
$ hg tglog
@ 3: 'L1'
|
o 2: 'R1'
|
o 1: 'C2'
|
o 0: 'C1'
Re-run:
$ hg pull --rebase
pulling from $TESTTMP/a (glob)
searching for changes
no changes found
Abort pull early if working dir is not clean:
$ echo L1-mod > L1
$ hg pull --rebase
abort: uncommitted changes
(cannot pull with rebase: please commit or shelve your changes first)
[255]
$ hg update --clean --quiet
Abort pull early if another operation (histedit) is in progress:
$ hg histedit . -q --commands - << EOF
> edit d80cc2da061e histedit: generate unfinished state
> EOF
Editing (d80cc2da061e), you may commit or record as needed now.
(hg histedit --continue to resume)
[1]
$ hg pull --rebase
abort: histedit in progress
(use 'hg histedit --continue' or 'hg histedit --abort')
[255]
$ hg histedit --abort --quiet
Abort pull early with pending uncommitted merge:
$ cd ..
$ hg clone --noupdate c d
$ cd d
$ hg tglog
o 1: 'C2'
|
o 0: 'C1'
$ hg update --quiet 0
$ echo M1 > M1
$ hg commit --quiet -Am M1
$ hg update --quiet 1
$ hg merge 2
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
(branch merge, don't forget to commit)
$ hg pull --rebase
abort: outstanding uncommitted merge
(cannot pull with rebase: please commit or shelve your changes first)
[255]
$ hg update --clean --quiet
Abort pull early with unclean subrepo:
$ echo s = s > .hgsub
$ hg add .hgsub
$ hg init s
$ hg commit -m "generated a subrepo"
$ echo a > s/a
$ hg -R s add s/a
$ hg pull --rebase
abort: uncommitted changes in subrepository 's'
(cannot pull with rebase: please commit or shelve your changes first)
[255]
Invoke pull --rebase and nothing to rebase:
$ cd ../c
$ hg book norebase
$ hg pull --rebase
pulling from $TESTTMP/a (glob)
searching for changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files
nothing to rebase - updating instead
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
updating bookmark norebase
$ hg tglog -l 1
@ 2: 'R1'
|
~
pull --rebase --update should ignore --update:
$ hg pull --rebase --update
pulling from $TESTTMP/a (glob)
searching for changes
no changes found
pull --rebase doesn't update if nothing has been pulled:
$ hg up -q 1
$ hg pull --rebase
pulling from $TESTTMP/a (glob)
searching for changes
no changes found
$ hg tglog -l 1
o 2: 'R1'
|
~
$ cd ..
pull --rebase works when a specific revision is pulled (issue3619)
$ cd a
$ hg tglog
@ 2: 'R1'
|
o 1: 'C2'
|
o 0: 'C1'
$ echo R2 > R2
$ hg ci -Am R2
adding R2
$ echo R3 > R3
$ hg ci -Am R3
adding R3
$ cd ../c
$ hg tglog
o 2: 'R1'
|
@ 1: 'C2'
|
o 0: 'C1'
$ echo L1 > L1
$ hg ci -Am L1
adding L1
created new head
$ hg pull --rev tip --rebase
pulling from $TESTTMP/a (glob)
searching for changes
adding changesets
adding manifests
adding file changes
added 2 changesets with 2 changes to 2 files
rebasing 3:ff8d69a621f9 "L1"
saved backup bundle to $TESTTMP/c/.hg/strip-backup/ff8d69a621f9-160fa373-backup.hg (glob)
$ hg tglog
@ 5: 'L1'
|
o 4: 'R3'
|
o 3: 'R2'
|
o 2: 'R1'
|
o 1: 'C2'
|
o 0: 'C1'
pull --rebase works with bundle2 turned on
$ cd ../a
$ echo R4 > R4
$ hg ci -Am R4
adding R4
$ hg tglog
@ 5: 'R4'
|
o 4: 'R3'
|
o 3: 'R2'
|
o 2: 'R1'
|
o 1: 'C2'
|
o 0: 'C1'
$ cd ../c
$ hg pull --rebase
pulling from $TESTTMP/a (glob)
searching for changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files (+1 heads)
rebasing 5:518d153c0ba3 "L1"
saved backup bundle to $TESTTMP/c/.hg/strip-backup/518d153c0ba3-73407f14-backup.hg (glob)
$ hg tglog
@ 6: 'L1'
|
o 5: 'R4'
|
o 4: 'R3'
|
o 3: 'R2'
|
o 2: 'R1'
|
o 1: 'C2'
|
o 0: 'C1'
pull --rebase only update if there is nothing to rebase
$ cd ../a
$ echo R5 > R5
$ hg ci -Am R5
adding R5
$ hg tglog
@ 6: 'R5'
|
o 5: 'R4'
|
o 4: 'R3'
|
o 3: 'R2'
|
o 2: 'R1'
|
o 1: 'C2'
|
o 0: 'C1'
$ cd ../c
$ echo L2 > L2
$ hg ci -Am L2
adding L2
$ hg up 'desc(L1)'
0 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ hg pull --rebase
pulling from $TESTTMP/a (glob)
searching for changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files (+1 heads)
rebasing 6:0d0727eb7ce0 "L1"
rebasing 7:c1f58876e3bf "L2"
saved backup bundle to $TESTTMP/c/.hg/strip-backup/0d0727eb7ce0-ef61ccb2-backup.hg (glob)
$ hg tglog
o 8: 'L2'
|
@ 7: 'L1'
|
o 6: 'R5'
|
o 5: 'R4'
|
o 4: 'R3'
|
o 3: 'R2'
|
o 2: 'R1'
|
o 1: 'C2'
|
o 0: 'C1'
pull --rebase update (no rebase) use proper update:
- warn about other head.
$ cd ../a
$ echo R6 > R6
$ hg ci -Am R6
adding R6
$ cd ../c
$ hg up 'desc(R5)'
0 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ hg pull --rebase
pulling from $TESTTMP/a (glob)
searching for changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files (+1 heads)
nothing to rebase - updating instead
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
updated to "65bc164c1d9b: R6"
1 other heads for branch "default"
$ hg tglog
@ 9: 'R6'
|
| o 8: 'L2'
| |
| o 7: 'L1'
|/
o 6: 'R5'
|
o 5: 'R4'
|
o 4: 'R3'
|
o 3: 'R2'
|
o 2: 'R1'
|
o 1: 'C2'
|
o 0: 'C1'
Multiple pre-existing heads on the branch
-----------------------------------------
Pull bring content, but nothing on the current branch, we should not consider
pre-existing heads.
$ cd ../a
$ hg branch unrelatedbranch
marked working directory as branch unrelatedbranch
(branches are permanent and global, did you want a bookmark?)
$ echo B1 > B1
$ hg commit -Am B1
adding B1
$ cd ../c
$ hg up 'desc(L2)'
2 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ hg pull --rebase
pulling from $TESTTMP/a (glob)
searching for changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files
nothing to rebase
There is two local heads and we pull a third one.
The second local head should not confuse the `hg pull rebase`.
$ hg up 'desc(R6)'
1 files updated, 0 files merged, 2 files removed, 0 files unresolved
$ echo M1 > M1
$ hg commit -Am M1
adding M1
$ cd ../a
$ hg up 'desc(R6)'
0 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ echo R7 > R7
$ hg commit -Am R7
adding R7
$ cd ../c
$ hg up 'desc(L2)'
2 files updated, 0 files merged, 2 files removed, 0 files unresolved
$ hg pull --rebase
pulling from $TESTTMP/a (glob)
searching for changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files (+1 heads)
rebasing 7:864e0a2d2614 "L1"
rebasing 8:6dc0ea5dcf55 "L2"
saved backup bundle to $TESTTMP/c/.hg/strip-backup/864e0a2d2614-2f72c89c-backup.hg (glob)
$ hg tglog
@ 12: 'L2'
|
o 11: 'L1'
|
o 10: 'R7'
|
| o 9: 'M1'
|/
| o 8: 'B1' unrelatedbranch
|/
o 7: 'R6'
|
o 6: 'R5'
|
o 5: 'R4'
|
o 4: 'R3'
|
o 3: 'R2'
|
o 2: 'R1'
|
o 1: 'C2'
|
o 0: 'C1'