view tests/test-wireproto.t @ 22456:4bbcee186fc6 stable

mq: examine "pushable" of already applied patch correctly

Before this patch, "hg qselect" with --pop/--reapply may pop patches
unexpectedly, even when all of patches applied before "qselect" are
still pushable.

Strictly speaking about the condition of this issue:

  - before "qselect"
    - there are N applied patches
    - the index of the guarded patch X in the series is less than N

  - after "qselect"
    - X is still guarded, and
    - all of applied patched are still pushable

In the case above, "hg qselect" should keep current status, but it
actually tries to pop patches because of X.

The index in "the series" should be used to examine "pushable" of a
patch by "mq.pushablek()", but the index in "applied patches" is used,
and this may cause unexpected examination of guarded patch.

To examine "pushable" of already applied patch correctly, this patch
uses "mq.applied[i].name": "pushable" is the function introduced by
the previous patch, and it returns "mq.pushable(mq.applied[i].name)[0]".

  $ "$TESTDIR/hghave" killdaemons || exit 80

Test wire protocol argument passing

Setup repo:

  $ hg init repo

Local:

  $ hg debugwireargs repo eins zwei --three drei --four vier
  eins zwei drei vier None
  $ hg debugwireargs repo eins zwei --four vier
  eins zwei None vier None
  $ hg debugwireargs repo eins zwei
  eins zwei None None None
  $ hg debugwireargs repo eins zwei --five fuenf
  eins zwei None None fuenf

HTTP:

  $ hg serve -R repo -p $HGPORT -d --pid-file=hg1.pid -E error.log -A access.log
  $ cat hg1.pid >> $DAEMON_PIDS

  $ hg debugwireargs http://localhost:$HGPORT/ un deux trois quatre
  un deux trois quatre None
  $ hg debugwireargs http://localhost:$HGPORT/ \ un deux trois\  qu\ \ atre
   un deux trois  qu  atre None
  $ hg debugwireargs http://localhost:$HGPORT/ eins zwei --four vier
  eins zwei None vier None
  $ hg debugwireargs http://localhost:$HGPORT/ eins zwei
  eins zwei None None None
  $ hg debugwireargs http://localhost:$HGPORT/ eins zwei --five fuenf
  eins zwei None None None
  $ hg debugwireargs http://localhost:$HGPORT/ un deux trois onethousandcharactersxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
  un deux trois onethousandcharactersxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx None
  $ cat error.log
  $ cat access.log
  * - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
  * - - [*] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:four=quatre&one=un&three=trois&two=deux (glob)
  * - - [*] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:four=quatre&one=un&three=trois&two=deux (glob)
  * - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
  * - - [*] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:four=qu++atre&one=+un&three=trois+&two=deux (glob)
  * - - [*] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:four=qu++atre&one=+un&three=trois+&two=deux (glob)
  * - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
  * - - [*] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:four=vier&one=eins&two=zwei (glob)
  * - - [*] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:four=vier&one=eins&two=zwei (glob)
  * - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
  * - - [*] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:one=eins&two=zwei (glob)
  * - - [*] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:one=eins&two=zwei (glob)
  * - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
  * - - [*] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:one=eins&two=zwei (glob)
  * - - [*] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:one=eins&two=zwei (glob)
  * - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
  * - - [*] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:four=onethousandcharactersxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx&one x-hgarg-2:=un&three=trois&two=deux (glob)
  * - - [*] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:four=onethousandcharactersxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx&one x-hgarg-2:=un&three=trois&two=deux (glob)

HTTP without the httpheader capability:

  $ HGRCPATH="`pwd`/repo/.hgrc"
  $ export HGRCPATH
  $ CAP=httpheader
  $ . "$TESTDIR/notcapable"

  $ hg serve -R repo -p $HGPORT2 -d --pid-file=hg2.pid -E error2.log -A access2.log
  $ cat hg2.pid >> $DAEMON_PIDS

  $ hg debugwireargs http://localhost:$HGPORT2/ un deux trois quatre
  un deux trois quatre None
  $ hg debugwireargs http://localhost:$HGPORT2/ eins zwei --four vier
  eins zwei None vier None
  $ hg debugwireargs http://localhost:$HGPORT2/ eins zwei
  eins zwei None None None
  $ hg debugwireargs http://localhost:$HGPORT2/ eins zwei --five fuenf
  eins zwei None None None
  $ cat error2.log
  $ cat access2.log
  * - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
  * - - [*] "GET /?cmd=debugwireargs&four=quatre&one=un&three=trois&two=deux HTTP/1.1" 200 - (glob)
  * - - [*] "GET /?cmd=debugwireargs&four=quatre&one=un&three=trois&two=deux HTTP/1.1" 200 - (glob)
  * - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
  * - - [*] "GET /?cmd=debugwireargs&four=vier&one=eins&two=zwei HTTP/1.1" 200 - (glob)
  * - - [*] "GET /?cmd=debugwireargs&four=vier&one=eins&two=zwei HTTP/1.1" 200 - (glob)
  * - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
  * - - [*] "GET /?cmd=debugwireargs&one=eins&two=zwei HTTP/1.1" 200 - (glob)
  * - - [*] "GET /?cmd=debugwireargs&one=eins&two=zwei HTTP/1.1" 200 - (glob)
  * - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
  * - - [*] "GET /?cmd=debugwireargs&one=eins&two=zwei HTTP/1.1" 200 - (glob)
  * - - [*] "GET /?cmd=debugwireargs&one=eins&two=zwei HTTP/1.1" 200 - (glob)

SSH (try to exercise the ssh functionality with a dummy script):

  $ cat <<EOF > dummyssh
  > import sys
  > import os
  > os.chdir(os.path.dirname(sys.argv[0]))
  > if sys.argv[1] != "user@dummy":
  >     sys.exit(-1)
  > if not os.path.exists("dummyssh"):
  >     sys.exit(-1)
  > os.environ["SSH_CLIENT"] = "127.0.0.1 1 2"
  > r = os.system(sys.argv[2])
  > sys.exit(bool(r))
  > EOF

  $ hg debugwireargs --ssh "python ./dummyssh" ssh://user@dummy/repo uno due tre quattro
  uno due tre quattro None
  $ hg debugwireargs --ssh "python ./dummyssh" ssh://user@dummy/repo eins zwei --four vier
  eins zwei None vier None
  $ hg debugwireargs --ssh "python ./dummyssh" ssh://user@dummy/repo eins zwei
  eins zwei None None None
  $ hg debugwireargs --ssh "python ./dummyssh" ssh://user@dummy/repo eins zwei --five fuenf
  eins zwei None None None

Explicitly kill daemons to let the test exit on Windows

  $ "$TESTDIR/killdaemons.py" $DAEMON_PIDS