view tests/test-bundle-r.t @ 25757:4d1382fd96ff

context: write dirstate out explicitly at the end of markcommitted To detect change of a file without redundant comparison of file content, dirstate recognizes a file as certainly clean, if: (1) it is already known as "normal", (2) dirstate entry for it has valid (= not "-1") timestamp, and (3) mode, size and timestamp of it on the filesystem are as same as ones expected in dirstate This works as expected in many cases, but doesn't in the corner case that changing a file keeps mode, size and timestamp of it on the filesystem. The timetable below shows steps in one of typical such situations: ---- ----------------------------------- ---------------- timestamp of "f" ---------------- dirstate file- time action mem file system ---- ----------------------------------- ---- ----- ----- * *** *** - 'hg transplant REV1 REV2 ...' - transplanting REV1 .... N - change "f", but keep size N (via 'patch.patch()') - 'dirstate.normal("f")' N *** (via 'repo.commit()') - transplanting REV2 - change "f", but keep size N (via 'patch.patch()') - aborted while patching N+1 - release wlock - 'dirstate.write()' N N N - 'hg status' shows "r1" as "clean" N N N ---- ----------------------------------- ---- ----- ----- The most important point is that 'dirstate.write()' is executed at N+1 or later. This causes writing dirstate timestamp N of "f" out successfully. If it is executed at N, 'parsers.pack_dirstate()' replaces timestamp N with "-1" before actual writing dirstate out. This issue can occur when 'hg transplant' satisfies conditions below: - multiple revisions to be transplanted change the same file - those revisions don't change mode and size of the file, and - the 2nd or later revision of them fails after changing the file The root cause of this issue is that files are changed without flushing in-memory dirstate changes via 'repo.commit()' (even though omitting 'dirstate.normallookup()' on files changed by 'patch.patch()' for efficiency also causes this issue). To detect changes of files correctly, this patch writes in-memory dirstate changes out explicitly after marking files as clean in 'committablectx.markcommitted()', which is invoked via 'repo.commit()'. After this change, timetable is changed as below: ---- ----------------------------------- ---------------- timestamp of "f" ---------------- dirstate file- time action mem file system ---- ----------------------------------- ---- ----- ----- * *** *** - 'hg transplant REV1 REV2 ...' - transplanting REV1 .... N - change "f", but keep size N (via 'patch.patch()') - 'dirstate.normal("f")' N *** (via 'repo.commit()') ----------------------------------- ---- ----- ----- - 'dirsttate.write()' -1 -1 ----------------------------------- ---- ----- ----- - transplanting REV2 - change "f", but keep size N (via 'patch.patch()') - aborted while patching N+1 - release wlock - 'dirstate.write()' -1 -1 N - 'hg status' shows "r1" as "clean" -1 -1 N ---- ----------------------------------- ---- ----- ----- To reproduce this issue in tests certainly, this patch emulates some timing critical actions as below: - change "f" at N 'patch.patch()' with 'fakepatchtime.py' explicitly changes mtime of patched files to "2000-01-01 00:00" (= N). - 'dirstate.write()' via 'repo.commit()' at N 'fakedirstatewritetime.py' forces 'pack_dirstate()' to use "2000-01-01 00:00" as "now", only if 'pack_dirstate()' is invoked via 'committablectx.markcommitted()'. - 'dirstate.write()' via releasing wlock at N+1 (or "not at N") 'pack_dirstate()' via releasing wlock uses actual timestamp at runtime as "now", and it should be different from the "2000-01-01 00:00" of "f". BTW, this patch doesn't test cases below, even though 'patch.patch()' is used similarly in these cases: 1. failure of 'hg import' or 'hg qpush' 2. success of 'hg import', 'hg qpush' or 'hg transplant' Case (1) above doesn't cause this kind of issue, because: - if patching is aborted by conflicts, changed files are committed changed files are marked as CLEAN, even though they are partially patched. - otherwise, dirstate are fully restored by 'dirstateguard' For example in timetable above, timestamp of "f" in .hg/dirstate is restored to -1 (or less than N), and subsequent 'hg status' can detect changes correctly. Case (2) always causes 'repo.status()' invocation via 'repo.commit()' just after changing files inside same wlock scope. ---- ----------------------------------- ---------------- timestamp of "f" ---------------- dirstate file- time action mem file system ---- ----------------------------------- ---- ----- ----- N *** *** - make file "f" clean N - execute 'hg foobar' .... - 'dirstate.normal("f")' N *** (e.g. via dirty check or previous 'repo.commit()') - change "f", but keep size N - 'repo.status()' (*1) (via 'repo.commit()') ---- ----------------------------------- ---- ----- ----- At a glance, 'repo.status()' at (*1) seems to cause similar issue (= "changed files are treated as clean"), but actually doesn't. 'dirstate._lastnormaltime' should be N at (*1) above, because 'dirstate.normal()' via dirty check is finished at N. Therefore, "f" changed at N (= 'dirstate._lastnormaltime') is forcibly treated as "unsure" at (*1), and changes are detected as expected (see 'dirstate.status()' for detail). If 'hg import' is executed with '--no-commit', 'repo.status()' isn't invoked just after changing files inside same wlock scope. But preceding 'dirstate.normal()' is invoked inside another wlock scope via 'cmdutil.bailifchanged()', and in-memory changes should be flushed at the end of that scope. Therefore, timestamp N of clean "f" should be replaced by -1, if 'dirstate.write()' is invoked at N. It means that condition of this issue isn't satisfied.
author FUJIWARA Katsunori <foozy@lares.dti.ne.jp>
date Wed, 08 Jul 2015 17:01:09 +0900
parents f2719b387380
children 67eeb7421d8d
line wrap: on
line source

  $ hg init test
  $ cd test
  $ hg unbundle "$TESTDIR/bundles/remote.hg"
  adding changesets
  adding manifests
  adding file changes
  added 9 changesets with 7 changes to 4 files (+1 heads)
  (run 'hg heads' to see heads, 'hg merge' to merge)
  $ hg up tip
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd ..

  $ for i in 0 1 2 3 4 5 6 7 8; do
  >    mkdir test-"$i"
  >    hg --cwd test-"$i" init
  >    hg -R test bundle -r "$i" test-"$i".hg test-"$i"
  >    cd test-"$i"
  >    hg unbundle ../test-"$i".hg
  >    hg verify
  >    hg tip -q
  >    cd ..
  > done
  searching for changes
  1 changesets found
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  (run 'hg update' to get a working copy)
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  1 files, 1 changesets, 1 total revisions
  0:bfaf4b5cbf01
  searching for changes
  2 changesets found
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 1 files
  (run 'hg update' to get a working copy)
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  1 files, 2 changesets, 2 total revisions
  1:21f32785131f
  searching for changes
  3 changesets found
  adding changesets
  adding manifests
  adding file changes
  added 3 changesets with 3 changes to 1 files
  (run 'hg update' to get a working copy)
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  1 files, 3 changesets, 3 total revisions
  2:4ce51a113780
  searching for changes
  4 changesets found
  adding changesets
  adding manifests
  adding file changes
  added 4 changesets with 4 changes to 1 files
  (run 'hg update' to get a working copy)
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  1 files, 4 changesets, 4 total revisions
  3:93ee6ab32777
  searching for changes
  2 changesets found
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 1 files
  (run 'hg update' to get a working copy)
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  1 files, 2 changesets, 2 total revisions
  1:c70afb1ee985
  searching for changes
  3 changesets found
  adding changesets
  adding manifests
  adding file changes
  added 3 changesets with 3 changes to 1 files
  (run 'hg update' to get a working copy)
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  1 files, 3 changesets, 3 total revisions
  2:f03ae5a9b979
  searching for changes
  4 changesets found
  adding changesets
  adding manifests
  adding file changes
  added 4 changesets with 5 changes to 2 files
  (run 'hg update' to get a working copy)
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  2 files, 4 changesets, 5 total revisions
  3:095cb14b1b4d
  searching for changes
  5 changesets found
  adding changesets
  adding manifests
  adding file changes
  added 5 changesets with 6 changes to 3 files
  (run 'hg update' to get a working copy)
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  3 files, 5 changesets, 6 total revisions
  4:faa2e4234c7a
  searching for changes
  5 changesets found
  adding changesets
  adding manifests
  adding file changes
  added 5 changesets with 5 changes to 2 files
  (run 'hg update' to get a working copy)
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  2 files, 5 changesets, 5 total revisions
  4:916f1afdef90
  $ cd test-8
  $ hg pull ../test-7
  pulling from ../test-7
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 4 changesets with 2 changes to 3 files (+1 heads)
  (run 'hg heads' to see heads, 'hg merge' to merge)
  $ hg verify
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  4 files, 9 changesets, 7 total revisions
  $ hg rollback
  repository tip rolled back to revision 4 (undo pull)
  $ cd ..

should fail

  $ hg -R test bundle --base 2 -r tip test-bundle-branch1.hg test-3
  abort: --base is incompatible with specifying a destination
  [255]
  $ hg -R test bundle -r tip test-bundle-branch1.hg
  abort: repository default-push not found!
  [255]

  $ hg -R test bundle --base 2 -r tip test-bundle-branch1.hg
  2 changesets found
  $ hg -R test bundle --base 2 -r 7 test-bundle-branch2.hg
  4 changesets found
  $ hg -R test bundle --base 2 test-bundle-all.hg
  6 changesets found
  $ hg -R test bundle --base 3 -r tip test-bundle-should-fail.hg
  1 changesets found

empty bundle

  $ hg -R test bundle --base 7 --base 8 test-bundle-empty.hg
  no changes found
  [1]

issue76 msg2163

  $ hg -R test bundle --base 3 -r 3 -r 3 test-bundle-cset-3.hg
  no changes found
  [1]

Issue1910: 'hg bundle --base $head' does not exclude $head from
result

  $ hg -R test bundle --base 7 test-bundle-cset-7.hg
  4 changesets found

  $ hg clone test-2 test-9
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd test-9

revision 2

  $ hg tip -q
  2:4ce51a113780
  $ hg unbundle ../test-bundle-should-fail.hg
  adding changesets
  transaction abort!
  rollback completed
  abort: 00changelog.i@93ee6ab32777: unknown parent!
  [255]

revision 2

  $ hg tip -q
  2:4ce51a113780
  $ hg unbundle ../test-bundle-all.hg
  adding changesets
  adding manifests
  adding file changes
  added 6 changesets with 4 changes to 4 files (+1 heads)
  (run 'hg heads' to see heads, 'hg merge' to merge)

revision 8

  $ hg tip -q
  8:916f1afdef90
  $ hg verify
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  4 files, 9 changesets, 7 total revisions
  $ hg rollback
  repository tip rolled back to revision 2 (undo unbundle)

revision 2

  $ hg tip -q
  2:4ce51a113780
  $ hg unbundle ../test-bundle-branch1.hg
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 2 files
  (run 'hg update' to get a working copy)

revision 4

  $ hg tip -q
  4:916f1afdef90
  $ hg verify
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  2 files, 5 changesets, 5 total revisions
  $ hg rollback
  repository tip rolled back to revision 2 (undo unbundle)
  $ hg unbundle ../test-bundle-branch2.hg
  adding changesets
  adding manifests
  adding file changes
  added 4 changesets with 3 changes to 3 files (+1 heads)
  (run 'hg heads' to see heads, 'hg merge' to merge)

revision 6

  $ hg tip -q
  6:faa2e4234c7a
  $ hg verify
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  3 files, 7 changesets, 6 total revisions
  $ hg rollback
  repository tip rolled back to revision 2 (undo unbundle)
  $ hg unbundle ../test-bundle-cset-7.hg
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 2 files
  (run 'hg update' to get a working copy)

revision 4

  $ hg tip -q
  4:916f1afdef90
  $ hg verify
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  2 files, 5 changesets, 5 total revisions

  $ cd ../test
  $ hg merge 7
  note: possible conflict - afile was renamed multiple times to:
   anotherfile
   adifferentfile
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg ci -m merge
  $ cd ..
  $ hg -R test bundle --base 2 test-bundle-head.hg
  7 changesets found
  $ hg clone test-2 test-10
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd test-10
  $ hg unbundle ../test-bundle-head.hg
  adding changesets
  adding manifests
  adding file changes
  added 7 changesets with 4 changes to 4 files
  (run 'hg update' to get a working copy)

revision 9

  $ hg tip -q
  9:03fc0b0e347c
  $ hg verify
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  4 files, 10 changesets, 7 total revisions

  $ cd ..