Mercurial > hg
view tests/test-bundle.t @ 25757:4d1382fd96ff
context: write dirstate out explicitly at the end of markcommitted
To detect change of a file without redundant comparison of file
content, dirstate recognizes a file as certainly clean, if:
(1) it is already known as "normal",
(2) dirstate entry for it has valid (= not "-1") timestamp, and
(3) mode, size and timestamp of it on the filesystem are as same as
ones expected in dirstate
This works as expected in many cases, but doesn't in the corner case
that changing a file keeps mode, size and timestamp of it on the
filesystem.
The timetable below shows steps in one of typical such situations:
---- ----------------------------------- ----------------
timestamp of "f"
----------------
dirstate file-
time action mem file system
---- ----------------------------------- ---- ----- -----
* *** ***
- 'hg transplant REV1 REV2 ...'
- transplanting REV1
....
N
- change "f", but keep size N
(via 'patch.patch()')
- 'dirstate.normal("f")' N ***
(via 'repo.commit()')
- transplanting REV2
- change "f", but keep size N
(via 'patch.patch()')
- aborted while patching
N+1
- release wlock
- 'dirstate.write()' N N N
- 'hg status' shows "r1" as "clean" N N N
---- ----------------------------------- ---- ----- -----
The most important point is that 'dirstate.write()' is executed at N+1
or later. This causes writing dirstate timestamp N of "f" out
successfully. If it is executed at N, 'parsers.pack_dirstate()'
replaces timestamp N with "-1" before actual writing dirstate out.
This issue can occur when 'hg transplant' satisfies conditions below:
- multiple revisions to be transplanted change the same file
- those revisions don't change mode and size of the file, and
- the 2nd or later revision of them fails after changing the file
The root cause of this issue is that files are changed without
flushing in-memory dirstate changes via 'repo.commit()' (even though
omitting 'dirstate.normallookup()' on files changed by 'patch.patch()'
for efficiency also causes this issue).
To detect changes of files correctly, this patch writes in-memory
dirstate changes out explicitly after marking files as clean in
'committablectx.markcommitted()', which is invoked via
'repo.commit()'.
After this change, timetable is changed as below:
---- ----------------------------------- ----------------
timestamp of "f"
----------------
dirstate file-
time action mem file system
---- ----------------------------------- ---- ----- -----
* *** ***
- 'hg transplant REV1 REV2 ...'
- transplanting REV1
....
N
- change "f", but keep size N
(via 'patch.patch()')
- 'dirstate.normal("f")' N ***
(via 'repo.commit()')
----------------------------------- ---- ----- -----
- 'dirsttate.write()' -1 -1
----------------------------------- ---- ----- -----
- transplanting REV2
- change "f", but keep size N
(via 'patch.patch()')
- aborted while patching
N+1
- release wlock
- 'dirstate.write()' -1 -1 N
- 'hg status' shows "r1" as "clean" -1 -1 N
---- ----------------------------------- ---- ----- -----
To reproduce this issue in tests certainly, this patch emulates some
timing critical actions as below:
- change "f" at N
'patch.patch()' with 'fakepatchtime.py' explicitly changes mtime
of patched files to "2000-01-01 00:00" (= N).
- 'dirstate.write()' via 'repo.commit()' at N
'fakedirstatewritetime.py' forces 'pack_dirstate()' to use
"2000-01-01 00:00" as "now", only if 'pack_dirstate()' is invoked
via 'committablectx.markcommitted()'.
- 'dirstate.write()' via releasing wlock at N+1 (or "not at N")
'pack_dirstate()' via releasing wlock uses actual timestamp at
runtime as "now", and it should be different from the "2000-01-01
00:00" of "f".
BTW, this patch doesn't test cases below, even though 'patch.patch()'
is used similarly in these cases:
1. failure of 'hg import' or 'hg qpush'
2. success of 'hg import', 'hg qpush' or 'hg transplant'
Case (1) above doesn't cause this kind of issue, because:
- if patching is aborted by conflicts, changed files are committed
changed files are marked as CLEAN, even though they are partially
patched.
- otherwise, dirstate are fully restored by 'dirstateguard'
For example in timetable above, timestamp of "f" in .hg/dirstate
is restored to -1 (or less than N), and subsequent 'hg status' can
detect changes correctly.
Case (2) always causes 'repo.status()' invocation via 'repo.commit()'
just after changing files inside same wlock scope.
---- ----------------------------------- ----------------
timestamp of "f"
----------------
dirstate file-
time action mem file system
---- ----------------------------------- ---- ----- -----
N *** ***
- make file "f" clean N
- execute 'hg foobar'
....
- 'dirstate.normal("f")' N ***
(e.g. via dirty check
or previous 'repo.commit()')
- change "f", but keep size N
- 'repo.status()' (*1)
(via 'repo.commit()')
---- ----------------------------------- ---- ----- -----
At a glance, 'repo.status()' at (*1) seems to cause similar issue (=
"changed files are treated as clean"), but actually doesn't.
'dirstate._lastnormaltime' should be N at (*1) above, because
'dirstate.normal()' via dirty check is finished at N.
Therefore, "f" changed at N (= 'dirstate._lastnormaltime') is forcibly
treated as "unsure" at (*1), and changes are detected as expected (see
'dirstate.status()' for detail).
If 'hg import' is executed with '--no-commit', 'repo.status()' isn't
invoked just after changing files inside same wlock scope.
But preceding 'dirstate.normal()' is invoked inside another wlock
scope via 'cmdutil.bailifchanged()', and in-memory changes should be
flushed at the end of that scope.
Therefore, timestamp N of clean "f" should be replaced by -1, if
'dirstate.write()' is invoked at N. It means that condition of this
issue isn't satisfied.
author | FUJIWARA Katsunori <foozy@lares.dti.ne.jp> |
---|---|
date | Wed, 08 Jul 2015 17:01:09 +0900 |
parents | d19787db6fe0 |
children | 2fc86d92c4a9 |
line wrap: on
line source
Setting up test $ hg init test $ cd test $ echo 0 > afile $ hg add afile $ hg commit -m "0.0" $ echo 1 >> afile $ hg commit -m "0.1" $ echo 2 >> afile $ hg commit -m "0.2" $ echo 3 >> afile $ hg commit -m "0.3" $ hg update -C 0 1 files updated, 0 files merged, 0 files removed, 0 files unresolved $ echo 1 >> afile $ hg commit -m "1.1" created new head $ echo 2 >> afile $ hg commit -m "1.2" $ echo "a line" > fred $ echo 3 >> afile $ hg add fred $ hg commit -m "1.3" $ hg mv afile adifferentfile $ hg commit -m "1.3m" $ hg update -C 3 1 files updated, 0 files merged, 2 files removed, 0 files unresolved $ hg mv afile anotherfile $ hg commit -m "0.3m" $ hg verify checking changesets checking manifests crosschecking files in changesets and manifests checking files 4 files, 9 changesets, 7 total revisions $ cd .. $ hg init empty Bundle and phase $ hg -R test phase --force --secret 0 $ hg -R test bundle phase.hg empty searching for changes no changes found (ignored 9 secret changesets) [1] $ hg -R test phase --draft -r 'head()' Bundle --all $ hg -R test bundle --all all.hg 9 changesets found Bundle test to full.hg $ hg -R test bundle full.hg empty searching for changes 9 changesets found Unbundle full.hg in test $ hg -R test unbundle full.hg adding changesets adding manifests adding file changes added 0 changesets with 0 changes to 4 files (run 'hg update' to get a working copy) Verify empty $ hg -R empty heads [1] $ hg -R empty verify checking changesets checking manifests crosschecking files in changesets and manifests checking files 0 files, 0 changesets, 0 total revisions Pull full.hg into test (using --cwd) $ hg --cwd test pull ../full.hg pulling from ../full.hg searching for changes no changes found Verify that there are no leaked temporary files after pull (issue2797) $ ls test/.hg | grep .hg10un [1] Pull full.hg into empty (using --cwd) $ hg --cwd empty pull ../full.hg pulling from ../full.hg requesting all changes adding changesets adding manifests adding file changes added 9 changesets with 7 changes to 4 files (+1 heads) (run 'hg heads' to see heads, 'hg merge' to merge) Rollback empty $ hg -R empty rollback repository tip rolled back to revision -1 (undo pull) Pull full.hg into empty again (using --cwd) $ hg --cwd empty pull ../full.hg pulling from ../full.hg requesting all changes adding changesets adding manifests adding file changes added 9 changesets with 7 changes to 4 files (+1 heads) (run 'hg heads' to see heads, 'hg merge' to merge) Pull full.hg into test (using -R) $ hg -R test pull full.hg pulling from full.hg searching for changes no changes found Pull full.hg into empty (using -R) $ hg -R empty pull full.hg pulling from full.hg searching for changes no changes found Rollback empty $ hg -R empty rollback repository tip rolled back to revision -1 (undo pull) Pull full.hg into empty again (using -R) $ hg -R empty pull full.hg pulling from full.hg requesting all changes adding changesets adding manifests adding file changes added 9 changesets with 7 changes to 4 files (+1 heads) (run 'hg heads' to see heads, 'hg merge' to merge) Log -R full.hg in fresh empty $ rm -r empty $ hg init empty $ cd empty $ hg -R bundle://../full.hg log changeset: 8:aa35859c02ea tag: tip parent: 3:eebf5a27f8ca user: test date: Thu Jan 01 00:00:00 1970 +0000 summary: 0.3m changeset: 7:a6a34bfa0076 user: test date: Thu Jan 01 00:00:00 1970 +0000 summary: 1.3m changeset: 6:7373c1169842 user: test date: Thu Jan 01 00:00:00 1970 +0000 summary: 1.3 changeset: 5:1bb50a9436a7 user: test date: Thu Jan 01 00:00:00 1970 +0000 summary: 1.2 changeset: 4:095197eb4973 parent: 0:f9ee2f85a263 user: test date: Thu Jan 01 00:00:00 1970 +0000 summary: 1.1 changeset: 3:eebf5a27f8ca user: test date: Thu Jan 01 00:00:00 1970 +0000 summary: 0.3 changeset: 2:e38ba6f5b7e0 user: test date: Thu Jan 01 00:00:00 1970 +0000 summary: 0.2 changeset: 1:34c2bf6b0626 user: test date: Thu Jan 01 00:00:00 1970 +0000 summary: 0.1 changeset: 0:f9ee2f85a263 user: test date: Thu Jan 01 00:00:00 1970 +0000 summary: 0.0 Make sure bundlerepo doesn't leak tempfiles (issue2491) $ ls .hg 00changelog.i cache requires store Pull ../full.hg into empty (with hook) $ echo "[hooks]" >> .hg/hgrc $ echo "changegroup = printenv.py changegroup" >> .hg/hgrc doesn't work (yet ?) hg -R bundle://../full.hg verify $ hg pull bundle://../full.hg pulling from bundle:../full.hg requesting all changes adding changesets adding manifests adding file changes added 9 changesets with 7 changes to 4 files (+1 heads) changegroup hook: HG_NODE=f9ee2f85a263049e9ae6d37a0e67e96194ffb735 HG_SOURCE=pull HG_TXNID=TXN:* HG_URL=bundle:../full.hg (glob) (run 'hg heads' to see heads, 'hg merge' to merge) Rollback empty $ hg rollback repository tip rolled back to revision -1 (undo pull) $ cd .. Log -R bundle:empty+full.hg $ hg -R bundle:empty+full.hg log --template="{rev} "; echo "" 8 7 6 5 4 3 2 1 0 Pull full.hg into empty again (using -R; with hook) $ hg -R empty pull full.hg pulling from full.hg requesting all changes adding changesets adding manifests adding file changes added 9 changesets with 7 changes to 4 files (+1 heads) changegroup hook: HG_NODE=f9ee2f85a263049e9ae6d37a0e67e96194ffb735 HG_SOURCE=pull HG_TXNID=TXN:* HG_URL=bundle:empty+full.hg (glob) (run 'hg heads' to see heads, 'hg merge' to merge) Create partial clones $ rm -r empty $ hg init empty $ hg clone -r 3 test partial adding changesets adding manifests adding file changes added 4 changesets with 4 changes to 1 files updating to branch default 1 files updated, 0 files merged, 0 files removed, 0 files unresolved $ hg clone partial partial2 updating to branch default 1 files updated, 0 files merged, 0 files removed, 0 files unresolved $ cd partial Log -R full.hg in partial $ hg -R bundle://../full.hg log -T phases changeset: 8:aa35859c02ea tag: tip phase: draft parent: 3:eebf5a27f8ca user: test date: Thu Jan 01 00:00:00 1970 +0000 summary: 0.3m changeset: 7:a6a34bfa0076 phase: draft user: test date: Thu Jan 01 00:00:00 1970 +0000 summary: 1.3m changeset: 6:7373c1169842 phase: draft user: test date: Thu Jan 01 00:00:00 1970 +0000 summary: 1.3 changeset: 5:1bb50a9436a7 phase: draft user: test date: Thu Jan 01 00:00:00 1970 +0000 summary: 1.2 changeset: 4:095197eb4973 phase: draft parent: 0:f9ee2f85a263 user: test date: Thu Jan 01 00:00:00 1970 +0000 summary: 1.1 changeset: 3:eebf5a27f8ca phase: public user: test date: Thu Jan 01 00:00:00 1970 +0000 summary: 0.3 changeset: 2:e38ba6f5b7e0 phase: public user: test date: Thu Jan 01 00:00:00 1970 +0000 summary: 0.2 changeset: 1:34c2bf6b0626 phase: public user: test date: Thu Jan 01 00:00:00 1970 +0000 summary: 0.1 changeset: 0:f9ee2f85a263 phase: public user: test date: Thu Jan 01 00:00:00 1970 +0000 summary: 0.0 Incoming full.hg in partial $ hg incoming bundle://../full.hg comparing with bundle:../full.hg searching for changes changeset: 4:095197eb4973 parent: 0:f9ee2f85a263 user: test date: Thu Jan 01 00:00:00 1970 +0000 summary: 1.1 changeset: 5:1bb50a9436a7 user: test date: Thu Jan 01 00:00:00 1970 +0000 summary: 1.2 changeset: 6:7373c1169842 user: test date: Thu Jan 01 00:00:00 1970 +0000 summary: 1.3 changeset: 7:a6a34bfa0076 user: test date: Thu Jan 01 00:00:00 1970 +0000 summary: 1.3m changeset: 8:aa35859c02ea tag: tip parent: 3:eebf5a27f8ca user: test date: Thu Jan 01 00:00:00 1970 +0000 summary: 0.3m Outgoing -R full.hg vs partial2 in partial $ hg -R bundle://../full.hg outgoing ../partial2 comparing with ../partial2 searching for changes changeset: 4:095197eb4973 parent: 0:f9ee2f85a263 user: test date: Thu Jan 01 00:00:00 1970 +0000 summary: 1.1 changeset: 5:1bb50a9436a7 user: test date: Thu Jan 01 00:00:00 1970 +0000 summary: 1.2 changeset: 6:7373c1169842 user: test date: Thu Jan 01 00:00:00 1970 +0000 summary: 1.3 changeset: 7:a6a34bfa0076 user: test date: Thu Jan 01 00:00:00 1970 +0000 summary: 1.3m changeset: 8:aa35859c02ea tag: tip parent: 3:eebf5a27f8ca user: test date: Thu Jan 01 00:00:00 1970 +0000 summary: 0.3m Outgoing -R does-not-exist.hg vs partial2 in partial $ hg -R bundle://../does-not-exist.hg outgoing ../partial2 abort: *../does-not-exist.hg* (glob) [255] $ cd .. hide outer repo $ hg init Direct clone from bundle (all-history) $ hg clone full.hg full-clone requesting all changes adding changesets adding manifests adding file changes added 9 changesets with 7 changes to 4 files (+1 heads) updating to branch default 1 files updated, 0 files merged, 0 files removed, 0 files unresolved $ hg -R full-clone heads changeset: 8:aa35859c02ea tag: tip parent: 3:eebf5a27f8ca user: test date: Thu Jan 01 00:00:00 1970 +0000 summary: 0.3m changeset: 7:a6a34bfa0076 user: test date: Thu Jan 01 00:00:00 1970 +0000 summary: 1.3m $ rm -r full-clone When cloning from a non-copiable repository into '', do not recurse infinitely (issue2528) $ hg clone full.hg '' abort: empty destination path is not valid [255] test for http://mercurial.selenic.com/bts/issue216 Unbundle incremental bundles into fresh empty in one go $ rm -r empty $ hg init empty $ hg -R test bundle --base null -r 0 ../0.hg 1 changesets found $ hg -R test bundle --base 0 -r 1 ../1.hg 1 changesets found $ hg -R empty unbundle -u ../0.hg ../1.hg adding changesets adding manifests adding file changes added 1 changesets with 1 changes to 1 files adding changesets adding manifests adding file changes added 1 changesets with 1 changes to 1 files 1 files updated, 0 files merged, 0 files removed, 0 files unresolved View full contents of the bundle $ hg -R test bundle --base null -r 3 ../partial.hg 4 changesets found $ cd test $ hg -R ../../partial.hg log -r "bundle()" changeset: 0:f9ee2f85a263 user: test date: Thu Jan 01 00:00:00 1970 +0000 summary: 0.0 changeset: 1:34c2bf6b0626 user: test date: Thu Jan 01 00:00:00 1970 +0000 summary: 0.1 changeset: 2:e38ba6f5b7e0 user: test date: Thu Jan 01 00:00:00 1970 +0000 summary: 0.2 changeset: 3:eebf5a27f8ca user: test date: Thu Jan 01 00:00:00 1970 +0000 summary: 0.3 $ cd .. test for 540d1059c802 test for 540d1059c802 $ hg init orig $ cd orig $ echo foo > foo $ hg add foo $ hg ci -m 'add foo' $ hg clone . ../copy updating to branch default 1 files updated, 0 files merged, 0 files removed, 0 files unresolved $ hg tag foo $ cd ../copy $ echo >> foo $ hg ci -m 'change foo' $ hg bundle ../bundle.hg ../orig searching for changes 1 changesets found $ cd ../orig $ hg incoming ../bundle.hg comparing with ../bundle.hg searching for changes changeset: 2:ed1b79f46b9a tag: tip parent: 0:bbd179dfa0a7 user: test date: Thu Jan 01 00:00:00 1970 +0000 summary: change foo $ cd .. test bundle with # in the filename (issue2154): $ cp bundle.hg 'test#bundle.hg' $ cd orig $ hg incoming '../test#bundle.hg' comparing with ../test abort: unknown revision 'bundle.hg'! [255] note that percent encoding is not handled: $ hg incoming ../test%23bundle.hg abort: repository ../test%23bundle.hg not found! [255] $ cd .. test to bundle revisions on the newly created branch (issue3828): $ hg -q clone -U test test-clone $ cd test $ hg -q branch foo $ hg commit -m "create foo branch" $ hg -q outgoing ../test-clone 9:b4f5acb1ee27 $ hg -q bundle --branch foo foo.hg ../test-clone $ hg -R foo.hg -q log -r "bundle()" 9:b4f5acb1ee27 $ cd .. test for http://mercurial.selenic.com/bts/issue1144 test that verify bundle does not traceback partial history bundle, fails w/ unknown parent $ hg -R bundle.hg verify abort: 00changelog.i@bbd179dfa0a7: unknown parent! [255] full history bundle, refuses to verify non-local repo $ hg -R all.hg verify abort: cannot verify bundle or remote repos [255] but, regular verify must continue to work $ hg -R orig verify checking changesets checking manifests crosschecking files in changesets and manifests checking files 2 files, 2 changesets, 2 total revisions diff against bundle $ hg init b $ cd b $ hg -R ../all.hg diff -r tip diff -r aa35859c02ea anotherfile --- a/anotherfile Thu Jan 01 00:00:00 1970 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,4 +0,0 @@ -0 -1 -2 -3 $ cd .. bundle single branch $ hg init branchy $ cd branchy $ echo a >a $ echo x >x $ hg ci -Ama adding a adding x $ echo c >c $ echo xx >x $ hg ci -Amc adding c $ echo c1 >c1 $ hg ci -Amc1 adding c1 $ hg up 0 1 files updated, 0 files merged, 2 files removed, 0 files unresolved $ echo b >b $ hg ci -Amb adding b created new head $ echo b1 >b1 $ echo xx >x $ hg ci -Amb1 adding b1 $ hg clone -q -r2 . part == bundling via incoming $ hg in -R part --bundle incoming.hg --template "{node}\n" . comparing with . searching for changes 1a38c1b849e8b70c756d2d80b0b9a3ac0b7ea11a 057f4db07f61970e1c11e83be79e9d08adc4dc31 == bundling $ hg bundle bundle.hg part --debug --config progress.debug=true query 1; heads searching for changes all remote heads known locally 2 changesets found list of changesets: 1a38c1b849e8b70c756d2d80b0b9a3ac0b7ea11a 057f4db07f61970e1c11e83be79e9d08adc4dc31 bundling: 1/2 changesets (50.00%) bundling: 2/2 changesets (100.00%) bundling: 1/2 manifests (50.00%) bundling: 2/2 manifests (100.00%) bundling: b 1/3 files (33.33%) bundling: b1 2/3 files (66.67%) bundling: x 3/3 files (100.00%) == Test for issue3441 $ hg clone -q -r0 . part2 $ hg -q -R part2 pull bundle.hg $ hg -R part2 verify checking changesets checking manifests crosschecking files in changesets and manifests checking files 4 files, 3 changesets, 5 total revisions $ cd ..