Mercurial > hg
view tests/test-commit.t @ 25757:4d1382fd96ff
context: write dirstate out explicitly at the end of markcommitted
To detect change of a file without redundant comparison of file
content, dirstate recognizes a file as certainly clean, if:
(1) it is already known as "normal",
(2) dirstate entry for it has valid (= not "-1") timestamp, and
(3) mode, size and timestamp of it on the filesystem are as same as
ones expected in dirstate
This works as expected in many cases, but doesn't in the corner case
that changing a file keeps mode, size and timestamp of it on the
filesystem.
The timetable below shows steps in one of typical such situations:
---- ----------------------------------- ----------------
timestamp of "f"
----------------
dirstate file-
time action mem file system
---- ----------------------------------- ---- ----- -----
* *** ***
- 'hg transplant REV1 REV2 ...'
- transplanting REV1
....
N
- change "f", but keep size N
(via 'patch.patch()')
- 'dirstate.normal("f")' N ***
(via 'repo.commit()')
- transplanting REV2
- change "f", but keep size N
(via 'patch.patch()')
- aborted while patching
N+1
- release wlock
- 'dirstate.write()' N N N
- 'hg status' shows "r1" as "clean" N N N
---- ----------------------------------- ---- ----- -----
The most important point is that 'dirstate.write()' is executed at N+1
or later. This causes writing dirstate timestamp N of "f" out
successfully. If it is executed at N, 'parsers.pack_dirstate()'
replaces timestamp N with "-1" before actual writing dirstate out.
This issue can occur when 'hg transplant' satisfies conditions below:
- multiple revisions to be transplanted change the same file
- those revisions don't change mode and size of the file, and
- the 2nd or later revision of them fails after changing the file
The root cause of this issue is that files are changed without
flushing in-memory dirstate changes via 'repo.commit()' (even though
omitting 'dirstate.normallookup()' on files changed by 'patch.patch()'
for efficiency also causes this issue).
To detect changes of files correctly, this patch writes in-memory
dirstate changes out explicitly after marking files as clean in
'committablectx.markcommitted()', which is invoked via
'repo.commit()'.
After this change, timetable is changed as below:
---- ----------------------------------- ----------------
timestamp of "f"
----------------
dirstate file-
time action mem file system
---- ----------------------------------- ---- ----- -----
* *** ***
- 'hg transplant REV1 REV2 ...'
- transplanting REV1
....
N
- change "f", but keep size N
(via 'patch.patch()')
- 'dirstate.normal("f")' N ***
(via 'repo.commit()')
----------------------------------- ---- ----- -----
- 'dirsttate.write()' -1 -1
----------------------------------- ---- ----- -----
- transplanting REV2
- change "f", but keep size N
(via 'patch.patch()')
- aborted while patching
N+1
- release wlock
- 'dirstate.write()' -1 -1 N
- 'hg status' shows "r1" as "clean" -1 -1 N
---- ----------------------------------- ---- ----- -----
To reproduce this issue in tests certainly, this patch emulates some
timing critical actions as below:
- change "f" at N
'patch.patch()' with 'fakepatchtime.py' explicitly changes mtime
of patched files to "2000-01-01 00:00" (= N).
- 'dirstate.write()' via 'repo.commit()' at N
'fakedirstatewritetime.py' forces 'pack_dirstate()' to use
"2000-01-01 00:00" as "now", only if 'pack_dirstate()' is invoked
via 'committablectx.markcommitted()'.
- 'dirstate.write()' via releasing wlock at N+1 (or "not at N")
'pack_dirstate()' via releasing wlock uses actual timestamp at
runtime as "now", and it should be different from the "2000-01-01
00:00" of "f".
BTW, this patch doesn't test cases below, even though 'patch.patch()'
is used similarly in these cases:
1. failure of 'hg import' or 'hg qpush'
2. success of 'hg import', 'hg qpush' or 'hg transplant'
Case (1) above doesn't cause this kind of issue, because:
- if patching is aborted by conflicts, changed files are committed
changed files are marked as CLEAN, even though they are partially
patched.
- otherwise, dirstate are fully restored by 'dirstateguard'
For example in timetable above, timestamp of "f" in .hg/dirstate
is restored to -1 (or less than N), and subsequent 'hg status' can
detect changes correctly.
Case (2) always causes 'repo.status()' invocation via 'repo.commit()'
just after changing files inside same wlock scope.
---- ----------------------------------- ----------------
timestamp of "f"
----------------
dirstate file-
time action mem file system
---- ----------------------------------- ---- ----- -----
N *** ***
- make file "f" clean N
- execute 'hg foobar'
....
- 'dirstate.normal("f")' N ***
(e.g. via dirty check
or previous 'repo.commit()')
- change "f", but keep size N
- 'repo.status()' (*1)
(via 'repo.commit()')
---- ----------------------------------- ---- ----- -----
At a glance, 'repo.status()' at (*1) seems to cause similar issue (=
"changed files are treated as clean"), but actually doesn't.
'dirstate._lastnormaltime' should be N at (*1) above, because
'dirstate.normal()' via dirty check is finished at N.
Therefore, "f" changed at N (= 'dirstate._lastnormaltime') is forcibly
treated as "unsure" at (*1), and changes are detected as expected (see
'dirstate.status()' for detail).
If 'hg import' is executed with '--no-commit', 'repo.status()' isn't
invoked just after changing files inside same wlock scope.
But preceding 'dirstate.normal()' is invoked inside another wlock
scope via 'cmdutil.bailifchanged()', and in-memory changes should be
flushed at the end of that scope.
Therefore, timestamp N of clean "f" should be replaced by -1, if
'dirstate.write()' is invoked at N. It means that condition of this
issue isn't satisfied.
author | FUJIWARA Katsunori <foozy@lares.dti.ne.jp> |
---|---|
date | Wed, 08 Jul 2015 17:01:09 +0900 |
parents | eb52de500d2a |
children | 4b0fc75f9403 |
line wrap: on
line source
commit date test $ hg init test $ cd test $ echo foo > foo $ hg add foo $ cat > $TESTTMP/checkeditform.sh <<EOF > env | grep HGEDITFORM > true > EOF $ HGEDITOR="sh $TESTTMP/checkeditform.sh" hg commit -m "" HGEDITFORM=commit.normal.normal abort: empty commit message [255] $ hg commit -d '0 0' -m commit-1 $ echo foo >> foo $ hg commit -d '1 4444444' -m commit-3 abort: impossible time zone offset: 4444444 [255] $ hg commit -d '1 15.1' -m commit-4 abort: invalid date: '1\t15.1' [255] $ hg commit -d 'foo bar' -m commit-5 abort: invalid date: 'foo bar' [255] $ hg commit -d ' 1 4444' -m commit-6 $ hg commit -d '111111111111 0' -m commit-7 abort: date exceeds 32 bits: 111111111111 [255] $ hg commit -d '-7654321 3600' -m commit-7 abort: negative date value: -7654321 [255] commit added file that has been deleted $ echo bar > bar $ hg add bar $ rm bar $ hg commit -m commit-8 nothing changed (1 missing files, see 'hg status') [1] $ hg commit -m commit-8-2 bar abort: bar: file not found! [255] $ hg -q revert -a --no-backup $ mkdir dir $ echo boo > dir/file $ hg add adding dir/file (glob) $ hg -v commit -m commit-9 dir committing files: dir/file committing manifest committing changelog committed changeset 2:d2a76177cb42 $ echo > dir.file $ hg add adding dir.file $ hg commit -m commit-10 dir dir.file abort: dir: no match under directory! [255] $ echo >> dir/file $ mkdir bleh $ mkdir dir2 $ cd bleh $ hg commit -m commit-11 . abort: bleh: no match under directory! [255] $ hg commit -m commit-12 ../dir ../dir2 abort: dir2: no match under directory! [255] $ hg -v commit -m commit-13 ../dir committing files: dir/file committing manifest committing changelog committed changeset 3:1cd62a2d8db5 $ cd .. $ hg commit -m commit-14 does-not-exist abort: does-not-exist: * (glob) [255] #if symlink $ ln -s foo baz $ hg commit -m commit-15 baz abort: baz: file not tracked! [255] #endif $ touch quux $ hg commit -m commit-16 quux abort: quux: file not tracked! [255] $ echo >> dir/file $ hg -v commit -m commit-17 dir/file committing files: dir/file committing manifest committing changelog committed changeset 4:49176991390e An empty date was interpreted as epoch origin $ echo foo >> foo $ hg commit -d '' -m commit-no-date $ hg tip --template '{date|isodate}\n' | grep '1970' [1] Make sure we do not obscure unknown requires file entries (issue2649) $ echo foo >> foo $ echo fake >> .hg/requires $ hg commit -m bla abort: repository requires features unknown to this Mercurial: fake! (see http://mercurial.selenic.com/wiki/MissingRequirement for more information) [255] $ cd .. partial subdir commit test $ hg init test2 $ cd test2 $ mkdir foo $ echo foo > foo/foo $ mkdir bar $ echo bar > bar/bar $ hg add adding bar/bar (glob) adding foo/foo (glob) $ HGEDITOR=cat hg ci -e -m commit-subdir-1 foo commit-subdir-1 HG: Enter commit message. Lines beginning with 'HG:' are removed. HG: Leave message empty to abort commit. HG: -- HG: user: test HG: branch 'default' HG: added foo/foo $ hg ci -m commit-subdir-2 bar subdir log 1 $ hg log -v foo changeset: 0:f97e73a25882 user: test date: Thu Jan 01 00:00:00 1970 +0000 files: foo/foo description: commit-subdir-1 subdir log 2 $ hg log -v bar changeset: 1:aa809156d50d tag: tip user: test date: Thu Jan 01 00:00:00 1970 +0000 files: bar/bar description: commit-subdir-2 full log $ hg log -v changeset: 1:aa809156d50d tag: tip user: test date: Thu Jan 01 00:00:00 1970 +0000 files: bar/bar description: commit-subdir-2 changeset: 0:f97e73a25882 user: test date: Thu Jan 01 00:00:00 1970 +0000 files: foo/foo description: commit-subdir-1 $ cd .. dot and subdir commit test $ hg init test3 $ echo commit-foo-subdir > commit-log-test $ cd test3 $ mkdir foo $ echo foo content > foo/plain-file $ hg add foo/plain-file $ HGEDITOR=cat hg ci --edit -l ../commit-log-test foo commit-foo-subdir HG: Enter commit message. Lines beginning with 'HG:' are removed. HG: Leave message empty to abort commit. HG: -- HG: user: test HG: branch 'default' HG: added foo/plain-file $ echo modified foo content > foo/plain-file $ hg ci -m commit-foo-dot . full log $ hg log -v changeset: 1:95b38e3a5b2e tag: tip user: test date: Thu Jan 01 00:00:00 1970 +0000 files: foo/plain-file description: commit-foo-dot changeset: 0:65d4e9386227 user: test date: Thu Jan 01 00:00:00 1970 +0000 files: foo/plain-file description: commit-foo-subdir subdir log $ cd foo $ hg log . changeset: 1:95b38e3a5b2e tag: tip user: test date: Thu Jan 01 00:00:00 1970 +0000 summary: commit-foo-dot changeset: 0:65d4e9386227 user: test date: Thu Jan 01 00:00:00 1970 +0000 summary: commit-foo-subdir $ cd .. $ cd .. Issue1049: Hg permits partial commit of merge without warning $ hg init issue1049 $ cd issue1049 $ echo a > a $ hg ci -Ama adding a $ echo a >> a $ hg ci -mb $ hg up 0 1 files updated, 0 files merged, 0 files removed, 0 files unresolved $ echo b >> a $ hg ci -mc created new head $ HGMERGE=true hg merge merging a 0 files updated, 1 files merged, 0 files removed, 0 files unresolved (branch merge, don't forget to commit) should fail because we are specifying a file name $ hg ci -mmerge a abort: cannot partially commit a merge (do not specify files or patterns) [255] should fail because we are specifying a pattern $ hg ci -mmerge -I a abort: cannot partially commit a merge (do not specify files or patterns) [255] should succeed $ HGEDITOR="sh $TESTTMP/checkeditform.sh" hg ci -mmerge --edit HGEDITFORM=commit.normal.merge $ cd .. test commit message content $ hg init commitmsg $ cd commitmsg $ echo changed > changed $ echo removed > removed $ hg book activebookmark $ hg ci -qAm init $ hg rm removed $ echo changed >> changed $ echo added > added $ hg add added $ HGEDITOR=cat hg ci -A HG: Enter commit message. Lines beginning with 'HG:' are removed. HG: Leave message empty to abort commit. HG: -- HG: user: test HG: branch 'default' HG: bookmark 'activebookmark' HG: added added HG: changed changed HG: removed removed abort: empty commit message [255] test saving last-message.txt $ hg init sub $ echo a > sub/a $ hg -R sub add sub/a $ cat > sub/.hg/hgrc <<EOF > [hooks] > precommit.test-saving-last-message = false > EOF $ echo 'sub = sub' > .hgsub $ hg add .hgsub $ cat > $TESTTMP/editor.sh <<EOF > echo "==== before editing:" > cat \$1 > echo "====" > echo "test saving last-message.txt" >> \$1 > EOF $ rm -f .hg/last-message.txt $ HGEDITOR="sh $TESTTMP/editor.sh" hg commit -S -q ==== before editing: HG: Enter commit message. Lines beginning with 'HG:' are removed. HG: Leave message empty to abort commit. HG: -- HG: user: test HG: branch 'default' HG: bookmark 'activebookmark' HG: subrepo sub HG: added .hgsub HG: added added HG: changed .hgsubstate HG: changed changed HG: removed removed ==== abort: precommit.test-saving-last-message hook exited with status 1 (in subrepo sub) [255] $ cat .hg/last-message.txt test saving last-message.txt test that '[committemplate] changeset' definition and commit log specific template keywords work well $ cat >> .hg/hgrc <<EOF > [committemplate] > changeset.commit.normal = HG: this is "commit.normal" template > HG: {extramsg} > {if(activebookmark, > "HG: bookmark '{activebookmark}' is activated\n", > "HG: no bookmark is activated\n")}{subrepos % > "HG: subrepo '{subrepo}' is changed\n"} > > changeset.commit = HG: this is "commit" template > HG: {extramsg} > {if(activebookmark, > "HG: bookmark '{activebookmark}' is activated\n", > "HG: no bookmark is activated\n")}{subrepos % > "HG: subrepo '{subrepo}' is changed\n"} > > changeset = HG: this is customized commit template > HG: {extramsg} > {if(activebookmark, > "HG: bookmark '{activebookmark}' is activated\n", > "HG: no bookmark is activated\n")}{subrepos % > "HG: subrepo '{subrepo}' is changed\n"} > EOF $ hg init sub2 $ echo a > sub2/a $ hg -R sub2 add sub2/a $ echo 'sub2 = sub2' >> .hgsub $ HGEDITOR=cat hg commit -S -q HG: this is "commit.normal" template HG: Leave message empty to abort commit. HG: bookmark 'activebookmark' is activated HG: subrepo 'sub' is changed HG: subrepo 'sub2' is changed abort: empty commit message [255] $ cat >> .hg/hgrc <<EOF > [committemplate] > changeset.commit.normal = > # now, "changeset.commit" should be chosen for "hg commit" > EOF $ hg bookmark --inactive activebookmark $ hg forget .hgsub $ HGEDITOR=cat hg commit -q HG: this is "commit" template HG: Leave message empty to abort commit. HG: no bookmark is activated abort: empty commit message [255] $ cat >> .hg/hgrc <<EOF > [committemplate] > changeset.commit = > # now, "changeset" should be chosen for "hg commit" > EOF $ HGEDITOR=cat hg commit -q HG: this is customized commit template HG: Leave message empty to abort commit. HG: no bookmark is activated abort: empty commit message [255] $ cat >> .hg/hgrc <<EOF > [committemplate] > changeset = {desc} > HG: mods={file_mods} > HG: adds={file_adds} > HG: dels={file_dels} > HG: files={files} > HG: > {splitlines(diff()) % 'HG: {line}\n' > }HG: > HG: mods={file_mods} > HG: adds={file_adds} > HG: dels={file_dels} > HG: files={files}\n > EOF $ hg status -amr M changed A added R removed $ HGEDITOR=cat hg commit -q -e -m "foo bar" changed foo bar HG: mods=changed HG: adds= HG: dels= HG: files=changed HG: HG: --- a/changed Thu Jan 01 00:00:00 1970 +0000 HG: +++ b/changed Thu Jan 01 00:00:00 1970 +0000 HG: @@ -1,1 +1,2 @@ HG: changed HG: +changed HG: HG: mods=changed HG: adds= HG: dels= HG: files=changed $ hg status -amr A added R removed $ hg parents --template "M {file_mods}\nA {file_adds}\nR {file_dels}\n" M changed A R $ hg rollback -q $ cat >> .hg/hgrc <<EOF > [committemplate] > changeset = {desc} > HG: mods={file_mods} > HG: adds={file_adds} > HG: dels={file_dels} > HG: files={files} > HG: > {splitlines(diff("changed")) % 'HG: {line}\n' > }HG: > HG: mods={file_mods} > HG: adds={file_adds} > HG: dels={file_dels} > HG: files={files} > HG: > {splitlines(diff("added")) % 'HG: {line}\n' > }HG: > HG: mods={file_mods} > HG: adds={file_adds} > HG: dels={file_dels} > HG: files={files} > HG: > {splitlines(diff("removed")) % 'HG: {line}\n' > }HG: > HG: mods={file_mods} > HG: adds={file_adds} > HG: dels={file_dels} > HG: files={files}\n > EOF $ HGEDITOR=cat hg commit -q -e -m "foo bar" added removed foo bar HG: mods= HG: adds=added HG: dels=removed HG: files=added removed HG: HG: HG: mods= HG: adds=added HG: dels=removed HG: files=added removed HG: HG: --- /dev/null Thu Jan 01 00:00:00 1970 +0000 HG: +++ b/added Thu Jan 01 00:00:00 1970 +0000 HG: @@ -0,0 +1,1 @@ HG: +added HG: HG: mods= HG: adds=added HG: dels=removed HG: files=added removed HG: HG: --- a/removed Thu Jan 01 00:00:00 1970 +0000 HG: +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 HG: @@ -1,1 +0,0 @@ HG: -removed HG: HG: mods= HG: adds=added HG: dels=removed HG: files=added removed $ hg status -amr M changed $ hg parents --template "M {file_mods}\nA {file_adds}\nR {file_dels}\n" M A added R removed $ hg rollback -q $ cat >> .hg/hgrc <<EOF > # disable customizing for subsequent tests > [committemplate] > changeset = > EOF $ cd .. commit copy $ hg init dir2 $ cd dir2 $ echo bleh > bar $ hg add bar $ hg ci -m 'add bar' $ hg cp bar foo $ echo >> bar $ hg ci -m 'cp bar foo; change bar' $ hg debugrename foo foo renamed from bar:26d3ca0dfd18e44d796b564e38dd173c9668d3a9 $ hg debugindex bar rev offset length ..... linkrev nodeid p1 p2 (re) 0 0 6 ..... 0 26d3ca0dfd18 000000000000 000000000000 (re) 1 6 7 ..... 1 d267bddd54f7 26d3ca0dfd18 000000000000 (re) Test making empty commits $ hg commit --config ui.allowemptycommit=True -m "empty commit" $ hg log -r . -v --stat changeset: 2:d809f3644287 tag: tip user: test date: Thu Jan 01 00:00:00 1970 +0000 description: empty commit verify pathauditor blocks evil filepaths $ cat > evil-commit.py <<EOF > from mercurial import ui, hg, context, node > notrc = u".h\u200cg".encode('utf-8') + '/hgrc' > u = ui.ui() > r = hg.repository(u, '.') > def filectxfn(repo, memctx, path): > return context.memfilectx(repo, path, '[hooks]\nupdate = echo owned') > c = context.memctx(r, [r['tip'].node(), node.nullid], > 'evil', [notrc], filectxfn, 0) > r.commitctx(c) > EOF $ $PYTHON evil-commit.py #if windows $ hg co --clean tip abort: path contains illegal component: .h\xe2\x80\x8cg\\hgrc (esc) [255] #else $ hg co --clean tip abort: path contains illegal component: .h\xe2\x80\x8cg/hgrc (esc) [255] #endif $ hg rollback -f repository tip rolled back to revision 2 (undo commit) $ cat > evil-commit.py <<EOF > from mercurial import ui, hg, context, node > notrc = "HG~1/hgrc" > u = ui.ui() > r = hg.repository(u, '.') > def filectxfn(repo, memctx, path): > return context.memfilectx(repo, path, '[hooks]\nupdate = echo owned') > c = context.memctx(r, [r['tip'].node(), node.nullid], > 'evil', [notrc], filectxfn, 0) > r.commitctx(c) > EOF $ $PYTHON evil-commit.py $ hg co --clean tip abort: path contains illegal component: HG~1/hgrc (glob) [255] $ hg rollback -f repository tip rolled back to revision 2 (undo commit) $ cat > evil-commit.py <<EOF > from mercurial import ui, hg, context, node > notrc = "HG8B6C~2/hgrc" > u = ui.ui() > r = hg.repository(u, '.') > def filectxfn(repo, memctx, path): > return context.memfilectx(repo, path, '[hooks]\nupdate = echo owned') > c = context.memctx(r, [r['tip'].node(), node.nullid], > 'evil', [notrc], filectxfn, 0) > r.commitctx(c) > EOF $ $PYTHON evil-commit.py $ hg co --clean tip abort: path contains illegal component: HG8B6C~2/hgrc (glob) [255]