Mercurial > hg
view tests/test-convert-cvs.t @ 25757:4d1382fd96ff
context: write dirstate out explicitly at the end of markcommitted
To detect change of a file without redundant comparison of file
content, dirstate recognizes a file as certainly clean, if:
(1) it is already known as "normal",
(2) dirstate entry for it has valid (= not "-1") timestamp, and
(3) mode, size and timestamp of it on the filesystem are as same as
ones expected in dirstate
This works as expected in many cases, but doesn't in the corner case
that changing a file keeps mode, size and timestamp of it on the
filesystem.
The timetable below shows steps in one of typical such situations:
---- ----------------------------------- ----------------
timestamp of "f"
----------------
dirstate file-
time action mem file system
---- ----------------------------------- ---- ----- -----
* *** ***
- 'hg transplant REV1 REV2 ...'
- transplanting REV1
....
N
- change "f", but keep size N
(via 'patch.patch()')
- 'dirstate.normal("f")' N ***
(via 'repo.commit()')
- transplanting REV2
- change "f", but keep size N
(via 'patch.patch()')
- aborted while patching
N+1
- release wlock
- 'dirstate.write()' N N N
- 'hg status' shows "r1" as "clean" N N N
---- ----------------------------------- ---- ----- -----
The most important point is that 'dirstate.write()' is executed at N+1
or later. This causes writing dirstate timestamp N of "f" out
successfully. If it is executed at N, 'parsers.pack_dirstate()'
replaces timestamp N with "-1" before actual writing dirstate out.
This issue can occur when 'hg transplant' satisfies conditions below:
- multiple revisions to be transplanted change the same file
- those revisions don't change mode and size of the file, and
- the 2nd or later revision of them fails after changing the file
The root cause of this issue is that files are changed without
flushing in-memory dirstate changes via 'repo.commit()' (even though
omitting 'dirstate.normallookup()' on files changed by 'patch.patch()'
for efficiency also causes this issue).
To detect changes of files correctly, this patch writes in-memory
dirstate changes out explicitly after marking files as clean in
'committablectx.markcommitted()', which is invoked via
'repo.commit()'.
After this change, timetable is changed as below:
---- ----------------------------------- ----------------
timestamp of "f"
----------------
dirstate file-
time action mem file system
---- ----------------------------------- ---- ----- -----
* *** ***
- 'hg transplant REV1 REV2 ...'
- transplanting REV1
....
N
- change "f", but keep size N
(via 'patch.patch()')
- 'dirstate.normal("f")' N ***
(via 'repo.commit()')
----------------------------------- ---- ----- -----
- 'dirsttate.write()' -1 -1
----------------------------------- ---- ----- -----
- transplanting REV2
- change "f", but keep size N
(via 'patch.patch()')
- aborted while patching
N+1
- release wlock
- 'dirstate.write()' -1 -1 N
- 'hg status' shows "r1" as "clean" -1 -1 N
---- ----------------------------------- ---- ----- -----
To reproduce this issue in tests certainly, this patch emulates some
timing critical actions as below:
- change "f" at N
'patch.patch()' with 'fakepatchtime.py' explicitly changes mtime
of patched files to "2000-01-01 00:00" (= N).
- 'dirstate.write()' via 'repo.commit()' at N
'fakedirstatewritetime.py' forces 'pack_dirstate()' to use
"2000-01-01 00:00" as "now", only if 'pack_dirstate()' is invoked
via 'committablectx.markcommitted()'.
- 'dirstate.write()' via releasing wlock at N+1 (or "not at N")
'pack_dirstate()' via releasing wlock uses actual timestamp at
runtime as "now", and it should be different from the "2000-01-01
00:00" of "f".
BTW, this patch doesn't test cases below, even though 'patch.patch()'
is used similarly in these cases:
1. failure of 'hg import' or 'hg qpush'
2. success of 'hg import', 'hg qpush' or 'hg transplant'
Case (1) above doesn't cause this kind of issue, because:
- if patching is aborted by conflicts, changed files are committed
changed files are marked as CLEAN, even though they are partially
patched.
- otherwise, dirstate are fully restored by 'dirstateguard'
For example in timetable above, timestamp of "f" in .hg/dirstate
is restored to -1 (or less than N), and subsequent 'hg status' can
detect changes correctly.
Case (2) always causes 'repo.status()' invocation via 'repo.commit()'
just after changing files inside same wlock scope.
---- ----------------------------------- ----------------
timestamp of "f"
----------------
dirstate file-
time action mem file system
---- ----------------------------------- ---- ----- -----
N *** ***
- make file "f" clean N
- execute 'hg foobar'
....
- 'dirstate.normal("f")' N ***
(e.g. via dirty check
or previous 'repo.commit()')
- change "f", but keep size N
- 'repo.status()' (*1)
(via 'repo.commit()')
---- ----------------------------------- ---- ----- -----
At a glance, 'repo.status()' at (*1) seems to cause similar issue (=
"changed files are treated as clean"), but actually doesn't.
'dirstate._lastnormaltime' should be N at (*1) above, because
'dirstate.normal()' via dirty check is finished at N.
Therefore, "f" changed at N (= 'dirstate._lastnormaltime') is forcibly
treated as "unsure" at (*1), and changes are detected as expected (see
'dirstate.status()' for detail).
If 'hg import' is executed with '--no-commit', 'repo.status()' isn't
invoked just after changing files inside same wlock scope.
But preceding 'dirstate.normal()' is invoked inside another wlock
scope via 'cmdutil.bailifchanged()', and in-memory changes should be
flushed at the end of that scope.
Therefore, timestamp N of clean "f" should be replaced by -1, if
'dirstate.write()' is invoked at N. It means that condition of this
issue isn't satisfied.
author | FUJIWARA Katsunori <foozy@lares.dti.ne.jp> |
---|---|
date | Wed, 08 Jul 2015 17:01:09 +0900 |
parents | 1abfe639a70c |
children | c60dfcc0abf2 |
line wrap: on
line source
#require cvs $ cvscall() > { > cvs -f "$@" > } $ hgcat() > { > hg --cwd src-hg cat -r tip "$1" > } $ echo "[extensions]" >> $HGRCPATH $ echo "convert = " >> $HGRCPATH $ cat > cvshooks.py <<EOF > def cvslog(ui,repo,hooktype,log): > print "%s hook: %d entries"%(hooktype,len(log)) > > def cvschangesets(ui,repo,hooktype,changesets): > print "%s hook: %d changesets"%(hooktype,len(changesets)) > EOF $ hookpath=`pwd` $ cat <<EOF >> $HGRCPATH > [hooks] > cvslog = python:$hookpath/cvshooks.py:cvslog > cvschangesets = python:$hookpath/cvshooks.py:cvschangesets > EOF create cvs repository $ mkdir cvsrepo $ cd cvsrepo $ CVSROOT=`pwd` $ export CVSROOT $ CVS_OPTIONS=-f $ export CVS_OPTIONS $ cd .. $ rmdir cvsrepo $ cvscall -q -d "$CVSROOT" init create source directory $ mkdir src-temp $ cd src-temp $ echo a > a $ mkdir b $ cd b $ echo c > c $ cd .. import source directory $ cvscall -q import -m import src INITIAL start N src/a N src/b/c No conflicts created by this import $ cd .. checkout source directory $ cvscall -q checkout src U src/a U src/b/c commit a new revision changing b/c $ cd src $ sleep 1 $ echo c >> b/c $ cvscall -q commit -mci0 . | grep '<--' $TESTTMP/cvsrepo/src/b/c,v <-- *c (glob) $ cd .. convert fresh repo and also check localtimezone option NOTE: This doesn't check all time zones -- it merely determines that the configuration option is taking effect. An arbitrary (U.S.) time zone is used here. TZ=US/Hawaii is selected since it does not use DST (unlike other U.S. time zones) and is always a fixed difference from UTC. $ TZ=US/Hawaii hg convert --config convert.localtimezone=True src src-hg initializing destination src-hg repository connecting to $TESTTMP/cvsrepo scanning source... collecting CVS rlog 5 log entries cvslog hook: 5 entries creating changesets 3 changeset entries cvschangesets hook: 3 changesets sorting... converting... 2 Initial revision 1 ci0 0 import updating tags $ hgcat a a $ hgcat b/c c c convert fresh repo with --filemap $ echo include b/c > filemap $ hg convert --filemap filemap src src-filemap initializing destination src-filemap repository connecting to $TESTTMP/cvsrepo scanning source... collecting CVS rlog 5 log entries cvslog hook: 5 entries creating changesets 3 changeset entries cvschangesets hook: 3 changesets sorting... converting... 2 Initial revision 1 ci0 0 import filtering out empty revision repository tip rolled back to revision 1 (undo convert) updating tags $ hgcat b/c c c $ hg -R src-filemap log --template '{rev} {desc} files: {files}\n' 2 update tags files: .hgtags 1 ci0 files: b/c 0 Initial revision files: b/c convert full repository (issue1649) $ cvscall -q -d "$CVSROOT" checkout -d srcfull "." | grep -v CVSROOT U srcfull/src/a U srcfull/src/b/c $ ls srcfull CVS CVSROOT src $ hg convert srcfull srcfull-hg \ > | grep -v 'log entries' | grep -v 'hook:' \ > | grep -v '^[0-3] .*' # filter instable changeset order initializing destination srcfull-hg repository connecting to $TESTTMP/cvsrepo scanning source... collecting CVS rlog creating changesets 4 changeset entries sorting... converting... updating tags $ hg cat -r tip --cwd srcfull-hg src/a a $ hg cat -r tip --cwd srcfull-hg src/b/c c c commit new file revisions $ cd src $ echo a >> a $ echo c >> b/c $ cvscall -q commit -mci1 . | grep '<--' $TESTTMP/cvsrepo/src/a,v <-- a $TESTTMP/cvsrepo/src/b/c,v <-- *c (glob) $ cd .. convert again $ TZ=US/Hawaii hg convert --config convert.localtimezone=True src src-hg connecting to $TESTTMP/cvsrepo scanning source... collecting CVS rlog 7 log entries cvslog hook: 7 entries creating changesets 4 changeset entries cvschangesets hook: 4 changesets sorting... converting... 0 ci1 $ hgcat a a a $ hgcat b/c c c c convert again with --filemap $ hg convert --filemap filemap src src-filemap connecting to $TESTTMP/cvsrepo scanning source... collecting CVS rlog 7 log entries cvslog hook: 7 entries creating changesets 4 changeset entries cvschangesets hook: 4 changesets sorting... converting... 0 ci1 $ hgcat b/c c c c $ hg -R src-filemap log --template '{rev} {desc} files: {files}\n' 3 ci1 files: b/c 2 update tags files: .hgtags 1 ci0 files: b/c 0 Initial revision files: b/c commit branch $ cd src $ cvs -q update -r1.1 b/c U b/c $ cvs -q tag -b branch T a T b/c $ cvs -q update -r branch > /dev/null $ echo d >> b/c $ cvs -q commit -mci2 . | grep '<--' $TESTTMP/cvsrepo/src/b/c,v <-- *c (glob) $ cd .. convert again $ TZ=US/Hawaii hg convert --config convert.localtimezone=True src src-hg connecting to $TESTTMP/cvsrepo scanning source... collecting CVS rlog 8 log entries cvslog hook: 8 entries creating changesets 5 changeset entries cvschangesets hook: 5 changesets sorting... converting... 0 ci2 $ hgcat b/c c d convert again with --filemap $ TZ=US/Hawaii hg convert --config convert.localtimezone=True --filemap filemap src src-filemap connecting to $TESTTMP/cvsrepo scanning source... collecting CVS rlog 8 log entries cvslog hook: 8 entries creating changesets 5 changeset entries cvschangesets hook: 5 changesets sorting... converting... 0 ci2 $ hgcat b/c c d $ hg -R src-filemap log --template '{rev} {desc} files: {files}\n' 4 ci2 files: b/c 3 ci1 files: b/c 2 update tags files: .hgtags 1 ci0 files: b/c 0 Initial revision files: b/c commit a new revision with funny log message $ cd src $ sleep 1 $ echo e >> a $ cvscall -q commit -m'funny > ---------------------------- > log message' . | grep '<--' |\ > sed -e 's:.*src/\(.*\),v.*:checking in src/\1,v:g' checking in src/a,v commit new file revisions with some fuzz $ sleep 1 $ echo f >> a $ cvscall -q commit -mfuzzy . | grep '<--' $TESTTMP/cvsrepo/src/a,v <-- a $ sleep 4 # the two changes will be split if fuzz < 4 $ echo g >> b/c $ cvscall -q commit -mfuzzy . | grep '<--' $TESTTMP/cvsrepo/src/b/c,v <-- *c (glob) $ cd .. convert again $ TZ=US/Hawaii hg convert --config convert.cvsps.fuzz=2 --config convert.localtimezone=True src src-hg connecting to $TESTTMP/cvsrepo scanning source... collecting CVS rlog 11 log entries cvslog hook: 11 entries creating changesets 8 changeset entries cvschangesets hook: 8 changesets sorting... converting... 2 funny 1 fuzzy 0 fuzzy $ hg -R src-hg log -G --template '{rev} ({branches}) {desc} date: {date|date} files: {files}\n' o 8 (branch) fuzzy date: * -1000 files: b/c (glob) | o 7 (branch) fuzzy date: * -1000 files: a (glob) | o 6 (branch) funny | ---------------------------- | log message date: * -1000 files: a (glob) o 5 (branch) ci2 date: * -1000 files: b/c (glob) o 4 () ci1 date: * -1000 files: a b/c (glob) | o 3 () update tags date: * +0000 files: .hgtags (glob) | | o 2 (INITIAL) import date: * -1000 files: (glob) | | o | 1 () ci0 date: * -1000 files: b/c (glob) |/ o 0 () Initial revision date: * -1000 files: a b/c (glob) testing debugcvsps $ cd src $ hg debugcvsps --fuzz=2 collecting CVS rlog 11 log entries cvslog hook: 11 entries creating changesets 10 changeset entries cvschangesets hook: 10 changesets --------------------- PatchSet 1 Date: * (glob) Author: * (glob) Branch: HEAD Tag: (none) Branchpoints: INITIAL Log: Initial revision Members: a:INITIAL->1.1 --------------------- PatchSet 2 Date: * (glob) Author: * (glob) Branch: HEAD Tag: (none) Branchpoints: INITIAL, branch Log: Initial revision Members: b/c:INITIAL->1.1 --------------------- PatchSet 3 Date: * (glob) Author: * (glob) Branch: INITIAL Tag: start Log: import Members: a:1.1->1.1.1.1 b/c:1.1->1.1.1.1 --------------------- PatchSet 4 Date: * (glob) Author: * (glob) Branch: HEAD Tag: (none) Log: ci0 Members: b/c:1.1->1.2 --------------------- PatchSet 5 Date: * (glob) Author: * (glob) Branch: HEAD Tag: (none) Branchpoints: branch Log: ci1 Members: a:1.1->1.2 --------------------- PatchSet 6 Date: * (glob) Author: * (glob) Branch: HEAD Tag: (none) Log: ci1 Members: b/c:1.2->1.3 --------------------- PatchSet 7 Date: * (glob) Author: * (glob) Branch: branch Tag: (none) Log: ci2 Members: b/c:1.1->1.1.2.1 --------------------- PatchSet 8 Date: * (glob) Author: * (glob) Branch: branch Tag: (none) Log: funny ---------------------------- log message Members: a:1.2->1.2.2.1 --------------------- PatchSet 9 Date: * (glob) Author: * (glob) Branch: branch Tag: (none) Log: fuzzy Members: a:1.2.2.1->1.2.2.2 --------------------- PatchSet 10 Date: * (glob) Author: * (glob) Branch: branch Tag: (none) Log: fuzzy Members: b/c:1.1.2.1->1.1.2.2 $ cd ..