Mercurial > hg
view tests/test-diff-ignore-whitespace.t @ 25757:4d1382fd96ff
context: write dirstate out explicitly at the end of markcommitted
To detect change of a file without redundant comparison of file
content, dirstate recognizes a file as certainly clean, if:
(1) it is already known as "normal",
(2) dirstate entry for it has valid (= not "-1") timestamp, and
(3) mode, size and timestamp of it on the filesystem are as same as
ones expected in dirstate
This works as expected in many cases, but doesn't in the corner case
that changing a file keeps mode, size and timestamp of it on the
filesystem.
The timetable below shows steps in one of typical such situations:
---- ----------------------------------- ----------------
timestamp of "f"
----------------
dirstate file-
time action mem file system
---- ----------------------------------- ---- ----- -----
* *** ***
- 'hg transplant REV1 REV2 ...'
- transplanting REV1
....
N
- change "f", but keep size N
(via 'patch.patch()')
- 'dirstate.normal("f")' N ***
(via 'repo.commit()')
- transplanting REV2
- change "f", but keep size N
(via 'patch.patch()')
- aborted while patching
N+1
- release wlock
- 'dirstate.write()' N N N
- 'hg status' shows "r1" as "clean" N N N
---- ----------------------------------- ---- ----- -----
The most important point is that 'dirstate.write()' is executed at N+1
or later. This causes writing dirstate timestamp N of "f" out
successfully. If it is executed at N, 'parsers.pack_dirstate()'
replaces timestamp N with "-1" before actual writing dirstate out.
This issue can occur when 'hg transplant' satisfies conditions below:
- multiple revisions to be transplanted change the same file
- those revisions don't change mode and size of the file, and
- the 2nd or later revision of them fails after changing the file
The root cause of this issue is that files are changed without
flushing in-memory dirstate changes via 'repo.commit()' (even though
omitting 'dirstate.normallookup()' on files changed by 'patch.patch()'
for efficiency also causes this issue).
To detect changes of files correctly, this patch writes in-memory
dirstate changes out explicitly after marking files as clean in
'committablectx.markcommitted()', which is invoked via
'repo.commit()'.
After this change, timetable is changed as below:
---- ----------------------------------- ----------------
timestamp of "f"
----------------
dirstate file-
time action mem file system
---- ----------------------------------- ---- ----- -----
* *** ***
- 'hg transplant REV1 REV2 ...'
- transplanting REV1
....
N
- change "f", but keep size N
(via 'patch.patch()')
- 'dirstate.normal("f")' N ***
(via 'repo.commit()')
----------------------------------- ---- ----- -----
- 'dirsttate.write()' -1 -1
----------------------------------- ---- ----- -----
- transplanting REV2
- change "f", but keep size N
(via 'patch.patch()')
- aborted while patching
N+1
- release wlock
- 'dirstate.write()' -1 -1 N
- 'hg status' shows "r1" as "clean" -1 -1 N
---- ----------------------------------- ---- ----- -----
To reproduce this issue in tests certainly, this patch emulates some
timing critical actions as below:
- change "f" at N
'patch.patch()' with 'fakepatchtime.py' explicitly changes mtime
of patched files to "2000-01-01 00:00" (= N).
- 'dirstate.write()' via 'repo.commit()' at N
'fakedirstatewritetime.py' forces 'pack_dirstate()' to use
"2000-01-01 00:00" as "now", only if 'pack_dirstate()' is invoked
via 'committablectx.markcommitted()'.
- 'dirstate.write()' via releasing wlock at N+1 (or "not at N")
'pack_dirstate()' via releasing wlock uses actual timestamp at
runtime as "now", and it should be different from the "2000-01-01
00:00" of "f".
BTW, this patch doesn't test cases below, even though 'patch.patch()'
is used similarly in these cases:
1. failure of 'hg import' or 'hg qpush'
2. success of 'hg import', 'hg qpush' or 'hg transplant'
Case (1) above doesn't cause this kind of issue, because:
- if patching is aborted by conflicts, changed files are committed
changed files are marked as CLEAN, even though they are partially
patched.
- otherwise, dirstate are fully restored by 'dirstateguard'
For example in timetable above, timestamp of "f" in .hg/dirstate
is restored to -1 (or less than N), and subsequent 'hg status' can
detect changes correctly.
Case (2) always causes 'repo.status()' invocation via 'repo.commit()'
just after changing files inside same wlock scope.
---- ----------------------------------- ----------------
timestamp of "f"
----------------
dirstate file-
time action mem file system
---- ----------------------------------- ---- ----- -----
N *** ***
- make file "f" clean N
- execute 'hg foobar'
....
- 'dirstate.normal("f")' N ***
(e.g. via dirty check
or previous 'repo.commit()')
- change "f", but keep size N
- 'repo.status()' (*1)
(via 'repo.commit()')
---- ----------------------------------- ---- ----- -----
At a glance, 'repo.status()' at (*1) seems to cause similar issue (=
"changed files are treated as clean"), but actually doesn't.
'dirstate._lastnormaltime' should be N at (*1) above, because
'dirstate.normal()' via dirty check is finished at N.
Therefore, "f" changed at N (= 'dirstate._lastnormaltime') is forcibly
treated as "unsure" at (*1), and changes are detected as expected (see
'dirstate.status()' for detail).
If 'hg import' is executed with '--no-commit', 'repo.status()' isn't
invoked just after changing files inside same wlock scope.
But preceding 'dirstate.normal()' is invoked inside another wlock
scope via 'cmdutil.bailifchanged()', and in-memory changes should be
flushed at the end of that scope.
Therefore, timestamp N of clean "f" should be replaced by -1, if
'dirstate.write()' is invoked at N. It means that condition of this
issue isn't satisfied.
author | FUJIWARA Katsunori <foozy@lares.dti.ne.jp> |
---|---|
date | Wed, 08 Jul 2015 17:01:09 +0900 |
parents | 405b6bd015df |
children | da07367d683b |
line wrap: on
line source
GNU diff is the reference for all of these results. Prepare tests: $ echo '[alias]' >> $HGRCPATH $ echo 'ndiff = diff --nodates' >> $HGRCPATH $ hg init $ printf 'hello world\ngoodbye world\n' >foo $ hg ci -Amfoo -ufoo adding foo Test added blank lines: $ printf '\nhello world\n\ngoodbye world\n\n' >foo >>> two diffs showing three added lines <<< $ hg ndiff diff -r 540c40a65b78 foo --- a/foo +++ b/foo @@ -1,2 +1,5 @@ + hello world + goodbye world + $ hg ndiff -b diff -r 540c40a65b78 foo --- a/foo +++ b/foo @@ -1,2 +1,5 @@ + hello world + goodbye world + >>> no diffs <<< $ hg ndiff -B $ hg ndiff -Bb Test added horizontal space first on a line(): $ printf '\t hello world\ngoodbye world\n' >foo >>> four diffs showing added space first on the first line <<< $ hg ndiff diff -r 540c40a65b78 foo --- a/foo +++ b/foo @@ -1,2 +1,2 @@ -hello world + hello world goodbye world $ hg ndiff -b diff -r 540c40a65b78 foo --- a/foo +++ b/foo @@ -1,2 +1,2 @@ -hello world + hello world goodbye world $ hg ndiff -B diff -r 540c40a65b78 foo --- a/foo +++ b/foo @@ -1,2 +1,2 @@ -hello world + hello world goodbye world $ hg ndiff -Bb diff -r 540c40a65b78 foo --- a/foo +++ b/foo @@ -1,2 +1,2 @@ -hello world + hello world goodbye world Test added horizontal space last on a line: $ printf 'hello world\t \ngoodbye world\n' >foo >>> two diffs showing space appended to the first line <<< $ hg ndiff diff -r 540c40a65b78 foo --- a/foo +++ b/foo @@ -1,2 +1,2 @@ -hello world +hello world goodbye world $ hg ndiff -B diff -r 540c40a65b78 foo --- a/foo +++ b/foo @@ -1,2 +1,2 @@ -hello world +hello world goodbye world >>> no diffs <<< $ hg ndiff -b $ hg ndiff -Bb Test added horizontal space in the middle of a word: $ printf 'hello world\ngood bye world\n' >foo >>> four diffs showing space inserted into "goodbye" <<< $ hg ndiff diff -r 540c40a65b78 foo --- a/foo +++ b/foo @@ -1,2 +1,2 @@ hello world -goodbye world +good bye world $ hg ndiff -B diff -r 540c40a65b78 foo --- a/foo +++ b/foo @@ -1,2 +1,2 @@ hello world -goodbye world +good bye world $ hg ndiff -b diff -r 540c40a65b78 foo --- a/foo +++ b/foo @@ -1,2 +1,2 @@ hello world -goodbye world +good bye world $ hg ndiff -Bb diff -r 540c40a65b78 foo --- a/foo +++ b/foo @@ -1,2 +1,2 @@ hello world -goodbye world +good bye world Test increased horizontal whitespace amount: $ printf 'hello world\ngoodbye\t\t \tworld\n' >foo >>> two diffs showing changed whitespace amount in the last line <<< $ hg ndiff diff -r 540c40a65b78 foo --- a/foo +++ b/foo @@ -1,2 +1,2 @@ hello world -goodbye world +goodbye world $ hg ndiff -B diff -r 540c40a65b78 foo --- a/foo +++ b/foo @@ -1,2 +1,2 @@ hello world -goodbye world +goodbye world >>> no diffs <<< $ hg ndiff -b $ hg ndiff -Bb Test added blank line with horizontal whitespace: $ printf 'hello world\n \t\ngoodbye world\n' >foo >>> three diffs showing added blank line with horizontal space <<< $ hg ndiff diff -r 540c40a65b78 foo --- a/foo +++ b/foo @@ -1,2 +1,3 @@ hello world + goodbye world $ hg ndiff -B diff -r 540c40a65b78 foo --- a/foo +++ b/foo @@ -1,2 +1,3 @@ hello world + goodbye world $ hg ndiff -b diff -r 540c40a65b78 foo --- a/foo +++ b/foo @@ -1,2 +1,3 @@ hello world + goodbye world >>> no diffs <<< $ hg ndiff -Bb Test added blank line with other whitespace: $ printf 'hello world\n \t\ngoodbye world \n' >foo >>> three diffs showing added blank line with other space <<< $ hg ndiff diff -r 540c40a65b78 foo --- a/foo +++ b/foo @@ -1,2 +1,3 @@ -hello world -goodbye world +hello world + +goodbye world $ hg ndiff -B diff -r 540c40a65b78 foo --- a/foo +++ b/foo @@ -1,2 +1,3 @@ -hello world -goodbye world +hello world + +goodbye world $ hg ndiff -b diff -r 540c40a65b78 foo --- a/foo +++ b/foo @@ -1,2 +1,3 @@ hello world + goodbye world >>> no diffs <<< $ hg ndiff -Bb Test whitespace changes: $ printf 'helloworld\ngoodbye\tworld \n' >foo >>> four diffs showing changed whitespace <<< $ hg ndiff diff -r 540c40a65b78 foo --- a/foo +++ b/foo @@ -1,2 +1,2 @@ -hello world -goodbye world +helloworld +goodbye world $ hg ndiff -B diff -r 540c40a65b78 foo --- a/foo +++ b/foo @@ -1,2 +1,2 @@ -hello world -goodbye world +helloworld +goodbye world $ hg ndiff -b diff -r 540c40a65b78 foo --- a/foo +++ b/foo @@ -1,2 +1,2 @@ -hello world +helloworld goodbye world $ hg ndiff -Bb diff -r 540c40a65b78 foo --- a/foo +++ b/foo @@ -1,2 +1,2 @@ -hello world +helloworld goodbye world >>> no diffs <<< $ hg ndiff -w Test whitespace changes and blank lines: $ printf 'helloworld\n\n\n\ngoodbye\tworld \n' >foo >>> five diffs showing changed whitespace <<< $ hg ndiff diff -r 540c40a65b78 foo --- a/foo +++ b/foo @@ -1,2 +1,5 @@ -hello world -goodbye world +helloworld + + + +goodbye world $ hg ndiff -B diff -r 540c40a65b78 foo --- a/foo +++ b/foo @@ -1,2 +1,5 @@ -hello world -goodbye world +helloworld + + + +goodbye world $ hg ndiff -b diff -r 540c40a65b78 foo --- a/foo +++ b/foo @@ -1,2 +1,5 @@ -hello world +helloworld + + + goodbye world $ hg ndiff -Bb diff -r 540c40a65b78 foo --- a/foo +++ b/foo @@ -1,2 +1,5 @@ -hello world +helloworld + + + goodbye world $ hg ndiff -w diff -r 540c40a65b78 foo --- a/foo +++ b/foo @@ -1,2 +1,5 @@ hello world + + + goodbye world >>> no diffs <<< $ hg ndiff -wB Test \r (carriage return) as used in "DOS" line endings: $ printf 'hello world\r\n\r\ngoodbye\rworld\n' >foo $ hg ndiff diff -r 540c40a65b78 foo --- a/foo +++ b/foo @@ -1,2 +1,3 @@ -hello world -goodbye world +hello world\r (esc) +\r (esc) +goodbye\r (no-eol) (esc) world No completely blank lines to ignore: $ hg ndiff --ignore-blank-lines diff -r 540c40a65b78 foo --- a/foo +++ b/foo @@ -1,2 +1,3 @@ -hello world -goodbye world +hello world\r (esc) +\r (esc) +goodbye\r (no-eol) (esc) world Only new line noticed: $ hg ndiff --ignore-space-change diff -r 540c40a65b78 foo --- a/foo +++ b/foo @@ -1,2 +1,3 @@ hello world +\r (esc) goodbye world $ hg ndiff --ignore-all-space diff -r 540c40a65b78 foo --- a/foo +++ b/foo @@ -1,2 +1,3 @@ hello world +\r (esc) goodbye world New line not noticed when space change ignored: $ hg ndiff --ignore-blank-lines --ignore-all-space Do not ignore all newlines, only blank lines $ printf 'hello \nworld\ngoodbye world\n' > foo $ hg ndiff --ignore-blank-lines diff -r 540c40a65b78 foo --- a/foo +++ b/foo @@ -1,2 +1,3 @@ -hello world +hello +world goodbye world Test hunk offsets adjustments with --ignore-blank-lines $ hg revert -aC reverting foo $ printf '\nb\nx\nd\n' > a $ printf 'b\ny\nd\n' > b $ hg add a b $ hg ci -m add $ hg cat -r . a > b $ hg cat -r . b > a $ hg diff -B --nodates a > ../diffa $ cat ../diffa diff -r 0e66aa54f318 a --- a/a +++ b/a @@ -1,4 +1,4 @@ b -x +y d $ hg diff -B --nodates b > ../diffb $ cat ../diffb diff -r 0e66aa54f318 b --- a/b +++ b/b @@ -1,3 +1,3 @@ b -y +x d $ hg revert -aC reverting a reverting b $ hg import --no-commit ../diffa applying ../diffa $ hg revert -aC reverting a $ hg import --no-commit ../diffb applying ../diffb $ hg revert -aC reverting b