view tests/test-hybridencode.py @ 25757:4d1382fd96ff

context: write dirstate out explicitly at the end of markcommitted

To detect change of a file without redundant comparison of file
content, dirstate recognizes a file as certainly clean, if:

  (1) it is already known as "normal",
  (2) dirstate entry for it has valid (= not "-1") timestamp, and
  (3) mode, size and timestamp of it on the filesystem are as same as
      ones expected in dirstate

This works as expected in many cases, but doesn't in the corner case
that changing a file keeps mode, size and timestamp of it on the
filesystem.

The timetable below shows steps in one of typical such situations:

  ---- ----------------------------------- ----------------
                                           timestamp of "f"
                                           ----------------
                                           dirstate   file-
  time          action                     mem  file  system
  ---- ----------------------------------- ---- ----- -----
   *                                             ***    ***
       - 'hg transplant REV1 REV2 ...'
         - transplanting REV1
           ....
   N
           - change "f", but keep size                   N
             (via 'patch.patch()')
           - 'dirstate.normal("f")'          N   ***
             (via 'repo.commit()')

         - transplanting REV2
           - change "f", but keep size                   N
             (via 'patch.patch()')
           - aborted while patching
  N+1
         - release wlock
           - 'dirstate.write()'              N    N      N

       - 'hg status' shows "r1" as "clean"   N    N      N
  ---- ----------------------------------- ---- ----- -----

The most important point is that 'dirstate.write()' is executed at N+1
or later. This causes writing dirstate timestamp N of "f" out
successfully. If it is executed at N, 'parsers.pack_dirstate()'
replaces timestamp N with "-1" before actual writing dirstate out.

This issue can occur when 'hg transplant' satisfies conditions below:

  - multiple revisions to be transplanted change the same file
  - those revisions don't change mode and size of the file, and
  - the 2nd or later revision of them fails after changing the file

The root cause of this issue is that files are changed without
flushing in-memory dirstate changes via 'repo.commit()' (even though
omitting 'dirstate.normallookup()' on files changed by 'patch.patch()'
for efficiency also causes this issue).

To detect changes of files correctly, this patch writes in-memory
dirstate changes out explicitly after marking files as clean in
'committablectx.markcommitted()', which is invoked via
'repo.commit()'.

After this change, timetable is changed as below:

  ---- ----------------------------------- ----------------
                                           timestamp of "f"
                                           ----------------
                                           dirstate   file-
  time          action                     mem  file  system
  ---- ----------------------------------- ---- ----- -----
   *                                             ***    ***
       - 'hg transplant REV1 REV2 ...'
         - transplanting REV1
           ....
   N
           - change "f", but keep size                   N
             (via 'patch.patch()')
           - 'dirstate.normal("f")'          N    ***
             (via 'repo.commit()')
       ----------------------------------- ---- ----- -----
           - 'dirsttate.write()'            -1    -1
       ----------------------------------- ---- ----- -----
         - transplanting REV2
           - change "f", but keep size                   N
             (via 'patch.patch()')
           - aborted while patching
  N+1
         - release wlock
           - 'dirstate.write()'              -1   -1     N

       - 'hg status' shows "r1" as "clean"   -1   -1     N
  ---- ----------------------------------- ---- ----- -----

To reproduce this issue in tests certainly, this patch emulates some
timing critical actions as below:

  - change "f" at N

    'patch.patch()' with 'fakepatchtime.py' explicitly changes mtime
    of patched files to "2000-01-01 00:00" (= N).

  - 'dirstate.write()' via 'repo.commit()' at N

    'fakedirstatewritetime.py' forces 'pack_dirstate()' to use
    "2000-01-01 00:00" as "now", only if 'pack_dirstate()' is invoked
    via 'committablectx.markcommitted()'.

  - 'dirstate.write()' via releasing wlock at N+1 (or "not at N")

    'pack_dirstate()' via releasing wlock uses actual timestamp at
    runtime as "now", and it should be different from the "2000-01-01
    00:00" of "f".

BTW, this patch doesn't test cases below, even though 'patch.patch()'
is used similarly in these cases:

  1. failure of 'hg import' or 'hg qpush'

  2. success of 'hg import', 'hg qpush' or 'hg transplant'

Case (1) above doesn't cause this kind of issue, because:

  - if patching is aborted by conflicts, changed files are committed

    changed files are marked as CLEAN, even though they are partially
    patched.

  - otherwise, dirstate are fully restored by 'dirstateguard'

    For example in timetable above, timestamp of "f" in .hg/dirstate
    is restored to -1 (or less than N), and subsequent 'hg status' can
    detect changes correctly.

Case (2) always causes 'repo.status()' invocation via 'repo.commit()'
just after changing files inside same wlock scope.

  ---- ----------------------------------- ----------------
                                           timestamp of "f"
                                           ----------------
                                           dirstate   file-
  time          action                     mem  file  system
  ---- ----------------------------------- ---- ----- -----
  N                                              ***   ***
       - make file "f" clean                            N

       - execute 'hg foobar'
         ....
         - 'dirstate.normal("f")'           N    ***
           (e.g. via dirty check
            or previous 'repo.commit()')

         - change "f", but keep size                    N
         - 'repo.status()' (*1)
           (via 'repo.commit()')
  ---- ----------------------------------- ---- ----- -----

At a glance, 'repo.status()' at (*1) seems to cause similar issue (=
"changed files are treated as clean"), but actually doesn't.

'dirstate._lastnormaltime' should be N at (*1) above, because
'dirstate.normal()' via dirty check is finished at N.

Therefore, "f" changed at N (= 'dirstate._lastnormaltime') is forcibly
treated as "unsure" at (*1), and changes are detected as expected (see
'dirstate.status()' for detail).

If 'hg import' is executed with '--no-commit', 'repo.status()' isn't
invoked just after changing files inside same wlock scope.

But preceding 'dirstate.normal()' is invoked inside another wlock
scope via 'cmdutil.bailifchanged()', and in-memory changes should be
flushed at the end of that scope.

Therefore, timestamp N of clean "f" should be replaced by -1, if
'dirstate.write()' is invoked at N. It means that condition of this
issue isn't satisfied.

from mercurial import store

def show(s):
    # show test input
    print "A = '%s'" % s.encode("string_escape")

    # show the result of the C implementation, if available
    h = store._pathencode(s)
    print "B = '%s'" % h.encode("string_escape")

    # compare it with reference implementation in Python
    r = store._hybridencode(s, True)
    if h != r:
        print "R = '%s'" % r.encode("string_escape")
    print

show("data/abcdefghijklmnopqrstuvwxyz0123456789 !#%&'()+,-.;=[]^`{}")

print "uppercase char X is encoded as _x"
show("data/ABCDEFGHIJKLMNOPQRSTUVWXYZ")

print "underbar is doubled"
show("data/_")

print "tilde is character-encoded"
show("data/~")

print "characters in ASCII code range 1..31"
show('data/\x01\x02\x03\x04\x05\x06\x07\x08\x09\x0a\x0b\x0c\x0d\x0e\x0f'
          '\x10\x11\x12\x13\x14\x15\x16\x17\x18\x19\x1a\x1b\x1c\x1d\x1e\x1f')

print "characters in ASCII code range 126..255"
show('data/\x7e\x7f'
          '\x80\x81\x82\x83\x84\x85\x86\x87\x88\x89\x8a\x8b\x8c\x8d\x8e\x8f'
          '\x90\x91\x92\x93\x94\x95\x96\x97\x98\x99\x9a\x9b\x9c\x9d\x9e\x9f')
show('data/\xa0\xa1\xa2\xa3\xa4\xa5\xa6\xa7\xa8\xa9\xaa\xab\xac\xad\xae\xaf'
          '\xb0\xb1\xb2\xb3\xb4\xb5\xb6\xb7\xb8\xb9\xba\xbb\xbc\xbd\xbe\xbf')
show('data/\xc0\xc1\xc2\xc3\xc4\xc5\xc6\xc7\xc8\xc9\xca\xcb\xcc\xcd\xce\xcf'
          '\xd0\xd1\xd2\xd3\xd4\xd5\xd6\xd7\xd8\xd9\xda\xdb\xdc\xdd\xde\xdf')
show('data/\xe0\xe1\xe2\xe3\xe4\xe5\xe6\xe7\xe8\xe9\xea\xeb\xec\xed\xee\xef'
          '\xf0\xf1\xf2\xf3\xf4\xf5\xf6\xf7\xf8\xf9\xfa\xfb\xfc\xfd\xfe\xff')

print "Windows reserved characters"
show('data/less <, greater >, colon :, double-quote ", backslash \\'
           ', pipe |, question-mark ?, asterisk *')

print "encoding directories ending in .hg, .i or .d with '.hg' suffix"
show('data/x.h.i/x.hg/x.i/x.d/foo')
show('data/a.hg/a.i/a.d/foo')
show('data/au.hg/au.i/au.d/foo')
show('data/aux.hg/aux.i/aux.d/foo')
show('data/auxy.hg/auxy.i/auxy.d/foo')

print "but these are not encoded on *filenames*"
show('data/foo/x.hg')
show('data/foo/x.i')
show('data/foo/x.d')
show('data/foo/a.hg')
show('data/foo/a.i')
show('data/foo/a.d')
show('data/foo/au.hg')
show('data/foo/au.i')
show('data/foo/au.d')
show('data/foo/aux.hg')
show('data/foo/aux.i')
show('data/foo/aux.d')
show('data/foo/auxy.hg')
show('data/foo/auxy.i')
show('data/foo/auxy.d')

print "plain .hg, .i and .d directories have the leading dot encoded"
show('data/.hg/.i/.d/foo')

show('data/aux.bla/bla.aux/prn/PRN/lpt/com3/nul/coma/foo.NUL/normal.c.i')

show('data/AUX/SECOND/X.PRN/FOURTH/FI:FTH/SIXTH/SEVENTH/EIGHTH/NINETH/'
     'TENTH/ELEVENTH/LOREMIPSUM.TXT.i')
show('data/enterprise/openesbaddons/contrib-imola/corba-bc/netbeansplugin/'
     'wsdlExtension/src/main/java/META-INF/services/org.netbeans.modules'
     '.xml.wsdl.bindingsupport.spi.ExtensibilityElementTemplateProvider.i')
show('data/AUX.THE-QUICK-BROWN-FOX-JU:MPS-OVER-THE-LAZY-DOG-THE-QUICK-'
     'BROWN-FOX-JUMPS-OVER-THE-LAZY-DOG.TXT.i')
show('data/Project Planning/Resources/AnotherLongDirectoryName/'
     'Followedbyanother/AndAnother/AndThenAnExtremelyLongFileName.txt')
show('data/Project.Planning/Resources/AnotherLongDirectoryName/'
     'Followedbyanother/AndAnother/AndThenAnExtremelyLongFileName.txt')
show('data/foo.../foo   / /a./_. /__/.x../    bla/.FOO/something.i')

show('data/c/co/com/com0/com1/com2/com3/com4/com5/com6/com7/com8/com9')
show('data/C/CO/COM/COM0/COM1/COM2/COM3/COM4/COM5/COM6/COM7/COM8/COM9')
show('data/c.x/co.x/com.x/com0.x/com1.x/com2.x/com3.x/com4.x/com5.x'
                                        '/com6.x/com7.x/com8.x/com9.x')
show('data/x.c/x.co/x.com0/x.com1/x.com2/x.com3/x.com4/x.com5'
                                        '/x.com6/x.com7/x.com8/x.com9')
show('data/cx/cox/comx/com0x/com1x/com2x/com3x/com4x/com5x'
                                            '/com6x/com7x/com8x/com9x')
show('data/xc/xco/xcom0/xcom1/xcom2/xcom3/xcom4/xcom5'
                                            '/xcom6/xcom7/xcom8/xcom9')

show('data/l/lp/lpt/lpt0/lpt1/lpt2/lpt3/lpt4/lpt5/lpt6/lpt7/lpt8/lpt9')
show('data/L/LP/LPT/LPT0/LPT1/LPT2/LPT3/LPT4/LPT5/LPT6/LPT7/LPT8/LPT9')
show('data/l.x/lp.x/lpt.x/lpt0.x/lpt1.x/lpt2.x/lpt3.x/lpt4.x/lpt5.x'
                                        '/lpt6.x/lpt7.x/lpt8.x/lpt9.x')
show('data/x.l/x.lp/x.lpt/x.lpt0/x.lpt1/x.lpt2/x.lpt3/x.lpt4/x.lpt5'
                                        '/x.lpt6/x.lpt7/x.lpt8/x.lpt9')
show('data/lx/lpx/lptx/lpt0x/lpt1x/lpt2x/lpt3x/lpt4x/lpt5x'
                                            '/lpt6x/lpt7x/lpt8x/lpt9x')
show('data/xl/xlp/xlpt/xlpt0/xlpt1/xlpt2/xlpt3/xlpt4/xlpt5'
                                            '/xlpt6/xlpt7/xlpt8/xlpt9')

show('data/con/p/pr/prn/a/au/aux/n/nu/nul')
show('data/CON/P/PR/PRN/A/AU/AUX/N/NU/NUL')
show('data/con.x/p.x/pr.x/prn.x/a.x/au.x/aux.x/n.x/nu.x/nul.x')
show('data/x.con/x.p/x.pr/x.prn/x.a/x.au/x.aux/x.n/x.nu/x.nul')
show('data/conx/px/prx/prnx/ax/aux/auxx/nx/nux/nulx')
show('data/xcon/xp/xpr/xprn/xa/xau/xaux/xn/xnu/xnul')

show('data/a./au./aux./auxy./aux.')
show('data/c./co./con./cony./con.')
show('data/p./pr./prn./prny./prn.')
show('data/n./nu./nul./nuly./nul.')
show('data/l./lp./lpt./lpt1./lpt1y./lpt1.')
show('data/lpt9./lpt9y./lpt9.')
show('data/com./com1./com1y./com1.')
show('data/com9./com9y./com9.')

show('data/a /au /aux /auxy /aux ')

print "largest unhashed path"
show('data/123456789-123456789-123456789-123456789-123456789-'
          'unhashed--xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-'
          '123456789-12345')

print "shortest hashed path"
show('data/123456789-123456789-123456789-123456789-123456789-'
          'hashed----xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-'
          '123456789-123456')

print "changing one char in part that's hashed away produces a different hash"
show('data/123456789-123456789-123456789-123456789-123456789-'
          'hashed----xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-xxxxxxxxy-'
          '123456789-123456')

print "uppercase hitting length limit due to encoding"
show('data/A23456789-123456789-123456789-123456789-123456789-'
          'xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-'
          '123456789-12345')
show('data/Z23456789-123456789-123456789-123456789-123456789-'
          'xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-'
          '123456789-12345')

print "compare with lowercase not hitting limit"
show('data/a23456789-123456789-123456789-123456789-123456789-'
          'xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-'
          '123456789-12345')
show('data/z23456789-123456789-123456789-123456789-123456789-'
          'xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-'
          '123456789-12345')

print "not hitting limit with any of these"
show("data/abcdefghijklmnopqrstuvwxyz0123456789 !#%&'()+,-.;="
          "[]^`{}xxx-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-"
          "123456789-12345")

print "underbar hitting length limit due to encoding"
show('data/_23456789-123456789-123456789-123456789-123456789-'
          'xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-'
          '123456789-12345')

print "tilde hitting length limit due to encoding"
show('data/~23456789-123456789-123456789-123456789-123456789-'
          'xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-'
          '123456789-12345')

print "Windows reserved characters hitting length limit"
show('data/<23456789-123456789-123456789-123456789-123456789-'
          'xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-'
          '123456789-12345')
show('data/>23456789-123456789-123456789-123456789-123456789-'
          'xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-'
          '123456789-12345')
show('data/:23456789-123456789-123456789-123456789-123456789-'
          'xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-'
          '123456789-12345')
show('data/"23456789-123456789-123456789-123456789-123456789-'
          'xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-'
          '123456789-12345')
show('data/\\23456789-123456789-123456789-123456789-123456789-'
          'xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-'
          '123456789-12345')
show('data/|23456789-123456789-123456789-123456789-123456789-'
          'xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-'
          '123456789-12345')
show('data/?23456789-123456789-123456789-123456789-123456789-'
          'xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-'
          '123456789-12345')
show('data/*23456789-123456789-123456789-123456789-123456789-'
          'xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-'
          '123456789-12345')

print "initial space hitting length limit"
show('data/ 23456789-123456789-123456789-123456789-123456789-'
          'xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-'
          '123456789-12345')

print "initial dot hitting length limit"
show('data/.23456789-123456789-123456789-123456789-123456789-'
          'xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-'
          '123456789-12345')

print "trailing space in filename hitting length limit"
show('data/123456789-123456789-123456789-123456789-123456789-'
          'xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-'
          '123456789-1234 ')

print "trailing dot in filename hitting length limit"
show('data/123456789-123456789-123456789-123456789-123456789-'
          'xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-'
          '123456789-1234.')

print "initial space in directory hitting length limit"
show('data/ x/456789-123456789-123456789-123456789-123456789-'
          'xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-'
          '123456789-12345')

print "initial dot in directory hitting length limit"
show('data/.x/456789-123456789-123456789-123456789-123456789-'
          'xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-'
          '123456789-12345')

print "trailing space in directory hitting length limit"
show('data/x /456789-123456789-123456789-123456789-123456789-'
          'xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-'
          '123456789-12345')

print "trailing dot in directory hitting length limit"
show('data/x./456789-123456789-123456789-123456789-123456789-'
          'xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-'
          '123456789-12345')

print "with directories that need direncoding, hitting length limit"
show('data/x.i/56789-123456789-123456789-123456789-123456789-'
          'xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-'
          '123456789-12345')
show('data/x.d/56789-123456789-123456789-123456789-123456789-'
          'xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-'
          '123456789-12345')
show('data/x.hg/5789-123456789-123456789-123456789-123456789-'
          'xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-'
          '123456789-12345')

print "Windows reserved filenames, hitting length limit"
show('data/con/56789-123456789-123456789-123456789-123456789-'
          'xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-'
          '123456789-12345')
show('data/prn/56789-123456789-123456789-123456789-123456789-'
          'xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-'
          '123456789-12345')
show('data/aux/56789-123456789-123456789-123456789-123456789-'
          'xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-'
          '123456789-12345')
show('data/nul/56789-123456789-123456789-123456789-123456789-'
          'xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-'
          '123456789-12345')
show('data/com1/6789-123456789-123456789-123456789-123456789-'
          'xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-'
          '123456789-12345')
show('data/com9/6789-123456789-123456789-123456789-123456789-'
          'xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-'
          '123456789-12345')
show('data/lpt1/6789-123456789-123456789-123456789-123456789-'
          'xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-'
          '123456789-12345')
show('data/lpt9/6789-123456789-123456789-123456789-123456789-'
          'xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-'
          '123456789-12345')

print "non-reserved names, just not hitting limit"
show('data/123456789-123456789-123456789-123456789-123456789-'
          '/com/com0/lpt/lpt0/-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-'
          '123456789-12345')

print "hashed path with largest untruncated 1st dir"
show('data/12345678/-123456789-123456789-123456789-123456789-'
          'hashed----xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-'
          '123456789-123456')

print "hashed path with smallest truncated 1st dir"
show('data/123456789/123456789-123456789-123456789-123456789-'
          'hashed----xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-'
          '123456789-123456')

print "hashed path with largest untruncated two dirs"
show('data/12345678/12345678/9-123456789-123456789-123456789-'
          'hashed----xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-'
          '123456789-123456')

print "hashed path with smallest truncated two dirs"
show('data/123456789/123456789/123456789-123456789-123456789-'
          'hashed----xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-'
          '123456789-123456')

print "hashed path with largest untruncated three dirs"
show('data/12345678/12345678/12345678/89-123456789-123456789-'
          'hashed----xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-'
          '123456789-123456')

print "hashed path with smallest truncated three dirs"
show('data/123456789/123456789/123456789/123456789-123456789-'
          'hashed----xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-'
          '123456789-123456')

print "hashed path with largest untruncated four dirs"
show('data/12345678/12345678/12345678/12345678/789-123456789-'
          'hashed----xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-'
          '123456789-123456')

print "hashed path with smallest truncated four dirs"
show('data/123456789/123456789/123456789/123456789/123456789-'
          'hashed----xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-'
          '123456789-123456')

print "hashed path with largest untruncated five dirs"
show('data/12345678/12345678/12345678/12345678/12345678/6789-'
          'hashed----xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-'
          '123456789-123456')

print "hashed path with smallest truncated five dirs"
show('data/123456789/123456789/123456789/123456789/123456789/'
          'hashed----xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-'
          '123456789-123456')

print "hashed path with largest untruncated six dirs"
show('data/12345678/12345678/12345678/12345678/12345678/12345'
          '678/ed----xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-'
          '123456789-123456')

print "hashed path with smallest truncated six dirs"
show('data/123456789/123456789/123456789/123456789/123456789/'
          '123456789/xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-'
          '123456789-123456')

print "hashed path with largest untruncated seven dirs"
show('data/12345678/12345678/12345678/12345678/12345678/12345'
          '678/12345678/xxxxxx-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-'
          '123456789-123456')

print "hashed path with smallest truncated seven dirs"
show('data/123456789/123456789/123456789/123456789/123456789/'
          '123456789/123456789/xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-'
          '123456789-123456')

print "hashed path with largest untruncated eight dirs"
print "(directory 8 is dropped because it hits _maxshortdirslen)"
show('data/12345678/12345678/12345678/12345678/12345678/12345'
          '678/12345678/12345678/xxxxxxx-xxxxxxxxx-xxxxxxxxx-'
          '123456789-123456')

print "hashed path with smallest truncated eight dirs"
print "(directory 8 is dropped because it hits _maxshortdirslen)"
show('data/123456789/123456789/123456789/123456789/123456789/'
          '123456789/123456789/123456789/xxxxxxxxx-xxxxxxxxx-'
          '123456789-123456')

print "hashed path with largest non-dropped directory 8"
print "(just not hitting the _maxshortdirslen boundary)"
show('data/12345678/12345678/12345678/12345678/12345678/12345'
          '678/12345678/12345/-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-'
          '123456789-123456')

print "...adding one truncated char to dir 1..7 won't drop dir 8"
show('data/12345678x/12345678/12345678/12345678/12345678/12345'
          '678/12345678/12345/xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-'
          '123456789-123456')
show('data/12345678/12345678x/12345678/12345678/12345678/12345'
          '678/12345678/12345/xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-'
          '123456789-123456')
show('data/12345678/12345678/12345678x/12345678/12345678/12345'
          '678/12345678/12345/xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-'
          '123456789-123456')
show('data/12345678/12345678/12345678/12345678x/12345678/12345'
          '678/12345678/12345/xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-'
          '123456789-123456')
show('data/12345678/12345678/12345678/12345678/12345678x/12345'
          '678/12345678/12345/xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-'
          '123456789-123456')
show('data/12345678/12345678/12345678/12345678/12345678/12345'
          '678x/12345678/12345/xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-'
          '123456789-123456')
show('data/12345678/12345678/12345678/12345678/12345678/12345'
          '678/12345678x/12345/xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-'
          '123456789-123456')

print "hashed path with shortest dropped directory 8"
print "(just hitting the _maxshortdirslen boundary)"
show('data/12345678/12345678/12345678/12345678/12345678/12345'
          '678/12345678/123456/xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-'
          '123456789-123456')

print "hashed path that drops dir 8 due to dot or space at end is"
print "encoded, and thus causing to hit _maxshortdirslen"
show('data/12345678/12345678/12345678/12345678/12345678/12345'
          '678/12345678/1234./-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-'
          '123456789-123456')
show('data/12345678/12345678/12345678/12345678/12345678/12345'
          '678/12345678/1234 /-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-'
          '123456789-123456')

print "... with dir 8 short enough for encoding"
show('data/12345678/12345678/12345678/12345678/12345678/12345'
          '678/12345678/12./xx-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-'
          '123456789-123456')
show('data/12345678/12345678/12345678/12345678/12345678/12345'
          '678/12345678/12 /xx-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-'
          '123456789-123456')

print '''Extensions are replicated on hashed paths. Note that
we only get to encode files that end in .i or .d inside the
store. Encoded filenames are thus bound in length.'''
show('data/12345678/12345678/12345678/12345678/12345678/12345'
          '678/12345678/12345/-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-'
          '123456789-12.345.i')
show('data/12345678/12345678/12345678/12345678/12345678/12345'
          '678/12345678/12345/-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-'
          '123456789-12.345.d')
show('data/12345678/12345678/12345678/12345678/12345678/12345'
          '678/12345678/12345/-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-'
          '123456789-12.3456.i')
show('data/12345678/12345678/12345678/12345678/12345678/12345'
          '678/12345678/12345/-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-'
          '123456789-12.34567.i')
show('data/12345678/12345678/12345678/12345678/12345678/12345'
          '678/12345678/12345/-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-'
          '123456789-12.345678.i')
show('data/12345678/12345678/12345678/12345678/12345678/12345'
          '678/12345678/12345/-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-'
          '123456789-12.3456789.i')
show('data/12345678/12345678/12345678/12345678/12345678/12345'
          '678/12345678/12345/-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-'
          '123456789-12.3456789-.i')
show('data/12345678/12345678/12345678/12345678/12345678/12345'
          '678/12345678/12345/-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-'
          '123456789-12.3456789-1.i')
show('data/12345678/12345678/12345678/12345678/12345678/12345'
          '678/12345678/12345/-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-'
          '123456789-12.3456789-12.i')
show('data/12345678/12345678/12345678/12345678/12345678/12345'
          '678/12345678/12345/-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-'
          '123456789-12.3456789-123.i')
show('data/12345678/12345678/12345678/12345678/12345678/12345'
          '678/12345678/12345/-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-'
          '123456789-12.3456789-1234.i')
show('data/12345678/12345678/12345678/12345678/12345678/12345'
          '678/12345678/12345/-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-'
          '123456789-12.3456789-12345.i')
show('data/12345678/12345678/12345678/12345678/12345678/12345'
          '678/12345678/12345/-xxxxxxxxx-xxxxxxxxx-xxxxxxxxx-'
          '123456789-12.3456789-12345-ABCDEFGHIJKLMNOPRSTUVWX'
          'YZ-abcdefghjiklmnopqrstuvwxyz-ABCDEFGHIJKLMNOPRSTU'
          'VWXYZ-1234567890-xxxxxxxxx-xxxxxxxxx-xxxxxxxx-xxxx'
          'xxxxx-wwwwwwwww-wwwwwwwww-wwwwwwwww-wwwwwwwww-wwww'
          'wwwww-wwwwwwwww-wwwwwwwww-wwwwwwwww-wwwwwwwww.i')

print "paths outside data/ can be encoded"
show('metadata/dir/00manifest.i')
show('metadata/12345678/12345678/12345678/12345678/12345678/'
          '12345678/12345678/12345678/12345678/12345678/12345678/'
          '12345678/12345678/00manifest.i')