view tests/test-merge-commit.t @ 25757:4d1382fd96ff

context: write dirstate out explicitly at the end of markcommitted

To detect change of a file without redundant comparison of file
content, dirstate recognizes a file as certainly clean, if:

  (1) it is already known as "normal",
  (2) dirstate entry for it has valid (= not "-1") timestamp, and
  (3) mode, size and timestamp of it on the filesystem are as same as
      ones expected in dirstate

This works as expected in many cases, but doesn't in the corner case
that changing a file keeps mode, size and timestamp of it on the
filesystem.

The timetable below shows steps in one of typical such situations:

  ---- ----------------------------------- ----------------
                                           timestamp of "f"
                                           ----------------
                                           dirstate   file-
  time          action                     mem  file  system
  ---- ----------------------------------- ---- ----- -----
   *                                             ***    ***
       - 'hg transplant REV1 REV2 ...'
         - transplanting REV1
           ....
   N
           - change "f", but keep size                   N
             (via 'patch.patch()')
           - 'dirstate.normal("f")'          N   ***
             (via 'repo.commit()')

         - transplanting REV2
           - change "f", but keep size                   N
             (via 'patch.patch()')
           - aborted while patching
  N+1
         - release wlock
           - 'dirstate.write()'              N    N      N

       - 'hg status' shows "r1" as "clean"   N    N      N
  ---- ----------------------------------- ---- ----- -----

The most important point is that 'dirstate.write()' is executed at N+1
or later. This causes writing dirstate timestamp N of "f" out
successfully. If it is executed at N, 'parsers.pack_dirstate()'
replaces timestamp N with "-1" before actual writing dirstate out.

This issue can occur when 'hg transplant' satisfies conditions below:

  - multiple revisions to be transplanted change the same file
  - those revisions don't change mode and size of the file, and
  - the 2nd or later revision of them fails after changing the file

The root cause of this issue is that files are changed without
flushing in-memory dirstate changes via 'repo.commit()' (even though
omitting 'dirstate.normallookup()' on files changed by 'patch.patch()'
for efficiency also causes this issue).

To detect changes of files correctly, this patch writes in-memory
dirstate changes out explicitly after marking files as clean in
'committablectx.markcommitted()', which is invoked via
'repo.commit()'.

After this change, timetable is changed as below:

  ---- ----------------------------------- ----------------
                                           timestamp of "f"
                                           ----------------
                                           dirstate   file-
  time          action                     mem  file  system
  ---- ----------------------------------- ---- ----- -----
   *                                             ***    ***
       - 'hg transplant REV1 REV2 ...'
         - transplanting REV1
           ....
   N
           - change "f", but keep size                   N
             (via 'patch.patch()')
           - 'dirstate.normal("f")'          N    ***
             (via 'repo.commit()')
       ----------------------------------- ---- ----- -----
           - 'dirsttate.write()'            -1    -1
       ----------------------------------- ---- ----- -----
         - transplanting REV2
           - change "f", but keep size                   N
             (via 'patch.patch()')
           - aborted while patching
  N+1
         - release wlock
           - 'dirstate.write()'              -1   -1     N

       - 'hg status' shows "r1" as "clean"   -1   -1     N
  ---- ----------------------------------- ---- ----- -----

To reproduce this issue in tests certainly, this patch emulates some
timing critical actions as below:

  - change "f" at N

    'patch.patch()' with 'fakepatchtime.py' explicitly changes mtime
    of patched files to "2000-01-01 00:00" (= N).

  - 'dirstate.write()' via 'repo.commit()' at N

    'fakedirstatewritetime.py' forces 'pack_dirstate()' to use
    "2000-01-01 00:00" as "now", only if 'pack_dirstate()' is invoked
    via 'committablectx.markcommitted()'.

  - 'dirstate.write()' via releasing wlock at N+1 (or "not at N")

    'pack_dirstate()' via releasing wlock uses actual timestamp at
    runtime as "now", and it should be different from the "2000-01-01
    00:00" of "f".

BTW, this patch doesn't test cases below, even though 'patch.patch()'
is used similarly in these cases:

  1. failure of 'hg import' or 'hg qpush'

  2. success of 'hg import', 'hg qpush' or 'hg transplant'

Case (1) above doesn't cause this kind of issue, because:

  - if patching is aborted by conflicts, changed files are committed

    changed files are marked as CLEAN, even though they are partially
    patched.

  - otherwise, dirstate are fully restored by 'dirstateguard'

    For example in timetable above, timestamp of "f" in .hg/dirstate
    is restored to -1 (or less than N), and subsequent 'hg status' can
    detect changes correctly.

Case (2) always causes 'repo.status()' invocation via 'repo.commit()'
just after changing files inside same wlock scope.

  ---- ----------------------------------- ----------------
                                           timestamp of "f"
                                           ----------------
                                           dirstate   file-
  time          action                     mem  file  system
  ---- ----------------------------------- ---- ----- -----
  N                                              ***   ***
       - make file "f" clean                            N

       - execute 'hg foobar'
         ....
         - 'dirstate.normal("f")'           N    ***
           (e.g. via dirty check
            or previous 'repo.commit()')

         - change "f", but keep size                    N
         - 'repo.status()' (*1)
           (via 'repo.commit()')
  ---- ----------------------------------- ---- ----- -----

At a glance, 'repo.status()' at (*1) seems to cause similar issue (=
"changed files are treated as clean"), but actually doesn't.

'dirstate._lastnormaltime' should be N at (*1) above, because
'dirstate.normal()' via dirty check is finished at N.

Therefore, "f" changed at N (= 'dirstate._lastnormaltime') is forcibly
treated as "unsure" at (*1), and changes are detected as expected (see
'dirstate.status()' for detail).

If 'hg import' is executed with '--no-commit', 'repo.status()' isn't
invoked just after changing files inside same wlock scope.

But preceding 'dirstate.normal()' is invoked inside another wlock
scope via 'cmdutil.bailifchanged()', and in-memory changes should be
flushed at the end of that scope.

Therefore, timestamp N of clean "f" should be replaced by -1, if
'dirstate.write()' is invoked at N. It means that condition of this
issue isn't satisfied.

Check that renames are correctly saved by a commit after a merge

Test with the merge on 3 having the rename on the local parent

  $ hg init a
  $ cd a

  $ echo line1 > foo
  $ hg add foo
  $ hg ci -m '0: add foo'

  $ echo line2 >> foo
  $ hg ci -m '1: change foo'

  $ hg up -C 0
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ hg mv foo bar
  $ rm bar
  $ echo line0 > bar
  $ echo line1 >> bar
  $ hg ci -m '2: mv foo bar; change bar'
  created new head

  $ hg merge 1
  merging bar and foo to bar
  0 files updated, 1 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)

  $ cat bar
  line0
  line1
  line2

  $ hg ci -m '3: merge with local rename'

  $ hg debugindex bar
     rev    offset  length  ..... linkrev nodeid       p1           p2 (re)
       0         0      77  .....       2 d35118874825 000000000000 000000000000 (re)
       1        77      76  .....       3 5345f5ab8abd 000000000000 d35118874825 (re)

  $ hg debugrename bar
  bar renamed from foo:9e25c27b87571a1edee5ae4dddee5687746cc8e2

  $ hg debugindex foo
     rev    offset  length  ..... linkrev nodeid       p1           p2 (re)
       0         0       7  .....       0 690b295714ae 000000000000 000000000000 (re)
       1         7      13  .....       1 9e25c27b8757 690b295714ae 000000000000 (re)


Revert the content change from rev 2:

  $ hg up -C 2
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ rm bar
  $ echo line1 > bar
  $ hg ci -m '4: revert content change from rev 2'
  created new head

  $ hg log --template '{rev}:{node|short} {parents}\n'
  4:2263c1be0967 2:0f2ff26688b9 
  3:0555950ead28 2:0f2ff26688b9 1:5cd961e4045d 
  2:0f2ff26688b9 0:2665aaee66e9 
  1:5cd961e4045d 
  0:2665aaee66e9 

This should use bar@rev2 as the ancestor:

  $ hg --debug merge 3
    searching for copies back to rev 1
  resolving manifests
   branchmerge: True, force: False, partial: False
   ancestor: 0f2ff26688b9, local: 2263c1be0967+, remote: 0555950ead28
   preserving bar for resolve of bar
   bar: versions differ -> m
  picked tool 'internal:merge' for bar (binary False symlink False)
  merging bar
  my bar@2263c1be0967+ other bar@0555950ead28 ancestor bar@0f2ff26688b9
   premerge successful
  0 files updated, 1 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)

  $ cat bar
  line1
  line2

  $ hg ci -m '5: merge'

  $ hg debugindex bar
     rev    offset  length  ..... linkrev nodeid       p1           p2 (re)
       0         0      77  .....       2 d35118874825 000000000000 000000000000 (re)
       1        77      76  .....       3 5345f5ab8abd 000000000000 d35118874825 (re)
       2       153       7  .....       4 ff4b45017382 d35118874825 000000000000 (re)
       3       160      13  .....       5 3701b4893544 ff4b45017382 5345f5ab8abd (re)


Same thing, but with the merge on 3 having the rename
on the remote parent:

  $ cd ..
  $ hg clone -U -r 1 -r 2 a b
  adding changesets
  adding manifests
  adding file changes
  added 3 changesets with 3 changes to 2 files (+1 heads)
  $ cd b

  $ hg up -C 1
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ hg merge 2
  merging foo and bar to bar
  0 files updated, 1 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)

  $ cat bar
  line0
  line1
  line2

  $ hg ci -m '3: merge with remote rename'

  $ hg debugindex bar
     rev    offset  length  ..... linkrev nodeid       p1           p2 (re)
       0         0      77  .....       2 d35118874825 000000000000 000000000000 (re)
       1        77      76  .....       3 5345f5ab8abd 000000000000 d35118874825 (re)

  $ hg debugrename bar
  bar renamed from foo:9e25c27b87571a1edee5ae4dddee5687746cc8e2

  $ hg debugindex foo
     rev    offset  length  ..... linkrev nodeid       p1           p2 (re)
       0         0       7  .....       0 690b295714ae 000000000000 000000000000 (re)
       1         7      13  .....       1 9e25c27b8757 690b295714ae 000000000000 (re)


Revert the content change from rev 2:

  $ hg up -C 2
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ rm bar
  $ echo line1 > bar
  $ hg ci -m '4: revert content change from rev 2'
  created new head

  $ hg log --template '{rev}:{node|short} {parents}\n'
  4:2263c1be0967 2:0f2ff26688b9 
  3:3ffa6b9e35f0 1:5cd961e4045d 2:0f2ff26688b9 
  2:0f2ff26688b9 0:2665aaee66e9 
  1:5cd961e4045d 
  0:2665aaee66e9 

This should use bar@rev2 as the ancestor:

  $ hg --debug merge 3
    searching for copies back to rev 1
  resolving manifests
   branchmerge: True, force: False, partial: False
   ancestor: 0f2ff26688b9, local: 2263c1be0967+, remote: 3ffa6b9e35f0
   preserving bar for resolve of bar
   bar: versions differ -> m
  picked tool 'internal:merge' for bar (binary False symlink False)
  merging bar
  my bar@2263c1be0967+ other bar@3ffa6b9e35f0 ancestor bar@0f2ff26688b9
   premerge successful
  0 files updated, 1 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)

  $ cat bar
  line1
  line2

  $ hg ci -m '5: merge'

  $ hg debugindex bar
     rev    offset  length  ..... linkrev nodeid       p1           p2 (re)
       0         0      77  .....       2 d35118874825 000000000000 000000000000 (re)
       1        77      76  .....       3 5345f5ab8abd 000000000000 d35118874825 (re)
       2       153       7  .....       4 ff4b45017382 d35118874825 000000000000 (re)
       3       160      13  .....       5 3701b4893544 ff4b45017382 5345f5ab8abd (re)

  $ cd ..