Mercurial > hg
view tests/test-mq-qrefresh-interactive.t @ 25757:4d1382fd96ff
context: write dirstate out explicitly at the end of markcommitted
To detect change of a file without redundant comparison of file
content, dirstate recognizes a file as certainly clean, if:
(1) it is already known as "normal",
(2) dirstate entry for it has valid (= not "-1") timestamp, and
(3) mode, size and timestamp of it on the filesystem are as same as
ones expected in dirstate
This works as expected in many cases, but doesn't in the corner case
that changing a file keeps mode, size and timestamp of it on the
filesystem.
The timetable below shows steps in one of typical such situations:
---- ----------------------------------- ----------------
timestamp of "f"
----------------
dirstate file-
time action mem file system
---- ----------------------------------- ---- ----- -----
* *** ***
- 'hg transplant REV1 REV2 ...'
- transplanting REV1
....
N
- change "f", but keep size N
(via 'patch.patch()')
- 'dirstate.normal("f")' N ***
(via 'repo.commit()')
- transplanting REV2
- change "f", but keep size N
(via 'patch.patch()')
- aborted while patching
N+1
- release wlock
- 'dirstate.write()' N N N
- 'hg status' shows "r1" as "clean" N N N
---- ----------------------------------- ---- ----- -----
The most important point is that 'dirstate.write()' is executed at N+1
or later. This causes writing dirstate timestamp N of "f" out
successfully. If it is executed at N, 'parsers.pack_dirstate()'
replaces timestamp N with "-1" before actual writing dirstate out.
This issue can occur when 'hg transplant' satisfies conditions below:
- multiple revisions to be transplanted change the same file
- those revisions don't change mode and size of the file, and
- the 2nd or later revision of them fails after changing the file
The root cause of this issue is that files are changed without
flushing in-memory dirstate changes via 'repo.commit()' (even though
omitting 'dirstate.normallookup()' on files changed by 'patch.patch()'
for efficiency also causes this issue).
To detect changes of files correctly, this patch writes in-memory
dirstate changes out explicitly after marking files as clean in
'committablectx.markcommitted()', which is invoked via
'repo.commit()'.
After this change, timetable is changed as below:
---- ----------------------------------- ----------------
timestamp of "f"
----------------
dirstate file-
time action mem file system
---- ----------------------------------- ---- ----- -----
* *** ***
- 'hg transplant REV1 REV2 ...'
- transplanting REV1
....
N
- change "f", but keep size N
(via 'patch.patch()')
- 'dirstate.normal("f")' N ***
(via 'repo.commit()')
----------------------------------- ---- ----- -----
- 'dirsttate.write()' -1 -1
----------------------------------- ---- ----- -----
- transplanting REV2
- change "f", but keep size N
(via 'patch.patch()')
- aborted while patching
N+1
- release wlock
- 'dirstate.write()' -1 -1 N
- 'hg status' shows "r1" as "clean" -1 -1 N
---- ----------------------------------- ---- ----- -----
To reproduce this issue in tests certainly, this patch emulates some
timing critical actions as below:
- change "f" at N
'patch.patch()' with 'fakepatchtime.py' explicitly changes mtime
of patched files to "2000-01-01 00:00" (= N).
- 'dirstate.write()' via 'repo.commit()' at N
'fakedirstatewritetime.py' forces 'pack_dirstate()' to use
"2000-01-01 00:00" as "now", only if 'pack_dirstate()' is invoked
via 'committablectx.markcommitted()'.
- 'dirstate.write()' via releasing wlock at N+1 (or "not at N")
'pack_dirstate()' via releasing wlock uses actual timestamp at
runtime as "now", and it should be different from the "2000-01-01
00:00" of "f".
BTW, this patch doesn't test cases below, even though 'patch.patch()'
is used similarly in these cases:
1. failure of 'hg import' or 'hg qpush'
2. success of 'hg import', 'hg qpush' or 'hg transplant'
Case (1) above doesn't cause this kind of issue, because:
- if patching is aborted by conflicts, changed files are committed
changed files are marked as CLEAN, even though they are partially
patched.
- otherwise, dirstate are fully restored by 'dirstateguard'
For example in timetable above, timestamp of "f" in .hg/dirstate
is restored to -1 (or less than N), and subsequent 'hg status' can
detect changes correctly.
Case (2) always causes 'repo.status()' invocation via 'repo.commit()'
just after changing files inside same wlock scope.
---- ----------------------------------- ----------------
timestamp of "f"
----------------
dirstate file-
time action mem file system
---- ----------------------------------- ---- ----- -----
N *** ***
- make file "f" clean N
- execute 'hg foobar'
....
- 'dirstate.normal("f")' N ***
(e.g. via dirty check
or previous 'repo.commit()')
- change "f", but keep size N
- 'repo.status()' (*1)
(via 'repo.commit()')
---- ----------------------------------- ---- ----- -----
At a glance, 'repo.status()' at (*1) seems to cause similar issue (=
"changed files are treated as clean"), but actually doesn't.
'dirstate._lastnormaltime' should be N at (*1) above, because
'dirstate.normal()' via dirty check is finished at N.
Therefore, "f" changed at N (= 'dirstate._lastnormaltime') is forcibly
treated as "unsure" at (*1), and changes are detected as expected (see
'dirstate.status()' for detail).
If 'hg import' is executed with '--no-commit', 'repo.status()' isn't
invoked just after changing files inside same wlock scope.
But preceding 'dirstate.normal()' is invoked inside another wlock
scope via 'cmdutil.bailifchanged()', and in-memory changes should be
flushed at the end of that scope.
Therefore, timestamp N of clean "f" should be replaced by -1, if
'dirstate.write()' is invoked at N. It means that condition of this
issue isn't satisfied.
author | FUJIWARA Katsunori <foozy@lares.dti.ne.jp> |
---|---|
date | Wed, 08 Jul 2015 17:01:09 +0900 |
parents | 9ab18a912c44 |
children | cc9fb45986d4 |
line wrap: on
line source
Create configuration $ echo "[ui]" >> $HGRCPATH $ echo "interactive=true" >> $HGRCPATH help qrefresh (no record) $ echo "[extensions]" >> $HGRCPATH $ echo "mq=" >> $HGRCPATH $ hg help qrefresh hg qrefresh [-I] [-X] [-e] [-m TEXT] [-l FILE] [-s] [FILE]... update the current patch If any file patterns are provided, the refreshed patch will contain only the modifications that match those patterns; the remaining modifications will remain in the working directory. If -s/--short is specified, files currently included in the patch will be refreshed just like matched files and remain in the patch. If -e/--edit is specified, Mercurial will start your configured editor for you to enter a message. In case qrefresh fails, you will find a backup of your message in ".hg/last-message.txt". hg add/remove/copy/rename work as usual, though you might want to use git- style patches (-g/--git or [diff] git=1) to track copies and renames. See the diffs help topic for more information on the git diff format. Returns 0 on success. options ([+] can be repeated): -e --edit invoke editor on commit messages -g --git use git extended diff format -s --short refresh only files already in the patch and specified files -U --currentuser add/update author field in patch with current user -u --user USER add/update author field in patch with given user -D --currentdate add/update date field in patch with current date -d --date DATE add/update date field in patch with given date -I --include PATTERN [+] include names matching the given patterns -X --exclude PATTERN [+] exclude names matching the given patterns -m --message TEXT use text as commit message -l --logfile FILE read commit message from file (some details hidden, use --verbose to show complete help) help qrefresh (record) $ echo "record=" >> $HGRCPATH $ hg help qrefresh hg qrefresh [-I] [-X] [-e] [-m TEXT] [-l FILE] [-s] [FILE]... update the current patch If any file patterns are provided, the refreshed patch will contain only the modifications that match those patterns; the remaining modifications will remain in the working directory. If -s/--short is specified, files currently included in the patch will be refreshed just like matched files and remain in the patch. If -e/--edit is specified, Mercurial will start your configured editor for you to enter a message. In case qrefresh fails, you will find a backup of your message in ".hg/last-message.txt". hg add/remove/copy/rename work as usual, though you might want to use git- style patches (-g/--git or [diff] git=1) to track copies and renames. See the diffs help topic for more information on the git diff format. Returns 0 on success. options ([+] can be repeated): -e --edit invoke editor on commit messages -g --git use git extended diff format -s --short refresh only files already in the patch and specified files -U --currentuser add/update author field in patch with current user -u --user USER add/update author field in patch with given user -D --currentdate add/update date field in patch with current date -d --date DATE add/update date field in patch with given date -I --include PATTERN [+] include names matching the given patterns -X --exclude PATTERN [+] exclude names matching the given patterns -m --message TEXT use text as commit message -l --logfile FILE read commit message from file -i --interactive interactively select changes to refresh (some details hidden, use --verbose to show complete help) $ hg init a $ cd a Base commit $ cat > 1.txt <<EOF > 1 > 2 > 3 > 4 > 5 > EOF $ cat > 2.txt <<EOF > a > b > c > d > e > f > EOF $ mkdir dir $ cat > dir/a.txt <<EOF > hello world > > someone > up > there > loves > me > EOF $ hg add 1.txt 2.txt dir/a.txt $ hg commit -m aaa $ hg qnew -d '0 0' patch Changing files $ sed -e 's/2/2 2/;s/4/4 4/' 1.txt > 1.txt.new $ sed -e 's/b/b b/' 2.txt > 2.txt.new $ sed -e 's/hello world/hello world!/' dir/a.txt > dir/a.txt.new $ mv -f 1.txt.new 1.txt $ mv -f 2.txt.new 2.txt $ mv -f dir/a.txt.new dir/a.txt Whole diff $ hg diff --nodates diff -r ed27675cb5df 1.txt --- a/1.txt +++ b/1.txt @@ -1,5 +1,5 @@ 1 -2 +2 2 3 -4 +4 4 5 diff -r ed27675cb5df 2.txt --- a/2.txt +++ b/2.txt @@ -1,5 +1,5 @@ a -b +b b c d e diff -r ed27675cb5df dir/a.txt --- a/dir/a.txt +++ b/dir/a.txt @@ -1,4 +1,4 @@ -hello world +hello world! someone up partial qrefresh $ hg qrefresh -i -d '0 0' <<EOF > y > y > n > y > y > n > EOF diff --git a/1.txt b/1.txt 2 hunks, 2 lines changed examine changes to '1.txt'? [Ynesfdaq?] y @@ -1,3 +1,3 @@ 1 -2 +2 2 3 record change 1/4 to '1.txt'? [Ynesfdaq?] y @@ -3,3 +3,3 @@ 3 -4 +4 4 5 record change 2/4 to '1.txt'? [Ynesfdaq?] n diff --git a/2.txt b/2.txt 1 hunks, 1 lines changed examine changes to '2.txt'? [Ynesfdaq?] y @@ -1,5 +1,5 @@ a -b +b b c d e record change 3/4 to '2.txt'? [Ynesfdaq?] y diff --git a/dir/a.txt b/dir/a.txt 1 hunks, 1 lines changed examine changes to 'dir/a.txt'? [Ynesfdaq?] n After partial qrefresh 'tip' $ hg tip -p changeset: 1:0738af1a8211 tag: patch tag: qbase tag: qtip tag: tip user: test date: Thu Jan 01 00:00:00 1970 +0000 summary: [mq]: patch diff -r 1fd39ab63a33 -r 0738af1a8211 1.txt --- a/1.txt Thu Jan 01 00:00:00 1970 +0000 +++ b/1.txt Thu Jan 01 00:00:00 1970 +0000 @@ -1,5 +1,5 @@ 1 -2 +2 2 3 4 5 diff -r 1fd39ab63a33 -r 0738af1a8211 2.txt --- a/2.txt Thu Jan 01 00:00:00 1970 +0000 +++ b/2.txt Thu Jan 01 00:00:00 1970 +0000 @@ -1,5 +1,5 @@ a -b +b b c d e After partial qrefresh 'diff' $ hg diff --nodates diff -r 0738af1a8211 1.txt --- a/1.txt +++ b/1.txt @@ -1,5 +1,5 @@ 1 2 2 3 -4 +4 4 5 diff -r 0738af1a8211 dir/a.txt --- a/dir/a.txt +++ b/dir/a.txt @@ -1,4 +1,4 @@ -hello world +hello world! someone up qrefresh interactively everything else $ hg qrefresh -i -d '0 0' <<EOF > y > y > y > y > EOF diff --git a/1.txt b/1.txt 1 hunks, 1 lines changed examine changes to '1.txt'? [Ynesfdaq?] y @@ -1,5 +1,5 @@ 1 2 2 3 -4 +4 4 5 record change 1/2 to '1.txt'? [Ynesfdaq?] y diff --git a/dir/a.txt b/dir/a.txt 1 hunks, 1 lines changed examine changes to 'dir/a.txt'? [Ynesfdaq?] y @@ -1,4 +1,4 @@ -hello world +hello world! someone up record change 2/2 to 'dir/a.txt'? [Ynesfdaq?] y After final qrefresh 'tip' $ hg tip -p changeset: 1:2c3f66afeed9 tag: patch tag: qbase tag: qtip tag: tip user: test date: Thu Jan 01 00:00:00 1970 +0000 summary: [mq]: patch diff -r 1fd39ab63a33 -r 2c3f66afeed9 1.txt --- a/1.txt Thu Jan 01 00:00:00 1970 +0000 +++ b/1.txt Thu Jan 01 00:00:00 1970 +0000 @@ -1,5 +1,5 @@ 1 -2 +2 2 3 -4 +4 4 5 diff -r 1fd39ab63a33 -r 2c3f66afeed9 2.txt --- a/2.txt Thu Jan 01 00:00:00 1970 +0000 +++ b/2.txt Thu Jan 01 00:00:00 1970 +0000 @@ -1,5 +1,5 @@ a -b +b b c d e diff -r 1fd39ab63a33 -r 2c3f66afeed9 dir/a.txt --- a/dir/a.txt Thu Jan 01 00:00:00 1970 +0000 +++ b/dir/a.txt Thu Jan 01 00:00:00 1970 +0000 @@ -1,4 +1,4 @@ -hello world +hello world! someone up After qrefresh 'diff' $ hg diff --nodates $ cd ..