view tests/test-rebase-collapse.t @ 25757:4d1382fd96ff

context: write dirstate out explicitly at the end of markcommitted

To detect change of a file without redundant comparison of file
content, dirstate recognizes a file as certainly clean, if:

  (1) it is already known as "normal",
  (2) dirstate entry for it has valid (= not "-1") timestamp, and
  (3) mode, size and timestamp of it on the filesystem are as same as
      ones expected in dirstate

This works as expected in many cases, but doesn't in the corner case
that changing a file keeps mode, size and timestamp of it on the
filesystem.

The timetable below shows steps in one of typical such situations:

  ---- ----------------------------------- ----------------
                                           timestamp of "f"
                                           ----------------
                                           dirstate   file-
  time          action                     mem  file  system
  ---- ----------------------------------- ---- ----- -----
   *                                             ***    ***
       - 'hg transplant REV1 REV2 ...'
         - transplanting REV1
           ....
   N
           - change "f", but keep size                   N
             (via 'patch.patch()')
           - 'dirstate.normal("f")'          N   ***
             (via 'repo.commit()')

         - transplanting REV2
           - change "f", but keep size                   N
             (via 'patch.patch()')
           - aborted while patching
  N+1
         - release wlock
           - 'dirstate.write()'              N    N      N

       - 'hg status' shows "r1" as "clean"   N    N      N
  ---- ----------------------------------- ---- ----- -----

The most important point is that 'dirstate.write()' is executed at N+1
or later. This causes writing dirstate timestamp N of "f" out
successfully. If it is executed at N, 'parsers.pack_dirstate()'
replaces timestamp N with "-1" before actual writing dirstate out.

This issue can occur when 'hg transplant' satisfies conditions below:

  - multiple revisions to be transplanted change the same file
  - those revisions don't change mode and size of the file, and
  - the 2nd or later revision of them fails after changing the file

The root cause of this issue is that files are changed without
flushing in-memory dirstate changes via 'repo.commit()' (even though
omitting 'dirstate.normallookup()' on files changed by 'patch.patch()'
for efficiency also causes this issue).

To detect changes of files correctly, this patch writes in-memory
dirstate changes out explicitly after marking files as clean in
'committablectx.markcommitted()', which is invoked via
'repo.commit()'.

After this change, timetable is changed as below:

  ---- ----------------------------------- ----------------
                                           timestamp of "f"
                                           ----------------
                                           dirstate   file-
  time          action                     mem  file  system
  ---- ----------------------------------- ---- ----- -----
   *                                             ***    ***
       - 'hg transplant REV1 REV2 ...'
         - transplanting REV1
           ....
   N
           - change "f", but keep size                   N
             (via 'patch.patch()')
           - 'dirstate.normal("f")'          N    ***
             (via 'repo.commit()')
       ----------------------------------- ---- ----- -----
           - 'dirsttate.write()'            -1    -1
       ----------------------------------- ---- ----- -----
         - transplanting REV2
           - change "f", but keep size                   N
             (via 'patch.patch()')
           - aborted while patching
  N+1
         - release wlock
           - 'dirstate.write()'              -1   -1     N

       - 'hg status' shows "r1" as "clean"   -1   -1     N
  ---- ----------------------------------- ---- ----- -----

To reproduce this issue in tests certainly, this patch emulates some
timing critical actions as below:

  - change "f" at N

    'patch.patch()' with 'fakepatchtime.py' explicitly changes mtime
    of patched files to "2000-01-01 00:00" (= N).

  - 'dirstate.write()' via 'repo.commit()' at N

    'fakedirstatewritetime.py' forces 'pack_dirstate()' to use
    "2000-01-01 00:00" as "now", only if 'pack_dirstate()' is invoked
    via 'committablectx.markcommitted()'.

  - 'dirstate.write()' via releasing wlock at N+1 (or "not at N")

    'pack_dirstate()' via releasing wlock uses actual timestamp at
    runtime as "now", and it should be different from the "2000-01-01
    00:00" of "f".

BTW, this patch doesn't test cases below, even though 'patch.patch()'
is used similarly in these cases:

  1. failure of 'hg import' or 'hg qpush'

  2. success of 'hg import', 'hg qpush' or 'hg transplant'

Case (1) above doesn't cause this kind of issue, because:

  - if patching is aborted by conflicts, changed files are committed

    changed files are marked as CLEAN, even though they are partially
    patched.

  - otherwise, dirstate are fully restored by 'dirstateguard'

    For example in timetable above, timestamp of "f" in .hg/dirstate
    is restored to -1 (or less than N), and subsequent 'hg status' can
    detect changes correctly.

Case (2) always causes 'repo.status()' invocation via 'repo.commit()'
just after changing files inside same wlock scope.

  ---- ----------------------------------- ----------------
                                           timestamp of "f"
                                           ----------------
                                           dirstate   file-
  time          action                     mem  file  system
  ---- ----------------------------------- ---- ----- -----
  N                                              ***   ***
       - make file "f" clean                            N

       - execute 'hg foobar'
         ....
         - 'dirstate.normal("f")'           N    ***
           (e.g. via dirty check
            or previous 'repo.commit()')

         - change "f", but keep size                    N
         - 'repo.status()' (*1)
           (via 'repo.commit()')
  ---- ----------------------------------- ---- ----- -----

At a glance, 'repo.status()' at (*1) seems to cause similar issue (=
"changed files are treated as clean"), but actually doesn't.

'dirstate._lastnormaltime' should be N at (*1) above, because
'dirstate.normal()' via dirty check is finished at N.

Therefore, "f" changed at N (= 'dirstate._lastnormaltime') is forcibly
treated as "unsure" at (*1), and changes are detected as expected (see
'dirstate.status()' for detail).

If 'hg import' is executed with '--no-commit', 'repo.status()' isn't
invoked just after changing files inside same wlock scope.

But preceding 'dirstate.normal()' is invoked inside another wlock
scope via 'cmdutil.bailifchanged()', and in-memory changes should be
flushed at the end of that scope.

Therefore, timestamp N of clean "f" should be replaced by -1, if
'dirstate.write()' is invoked at N. It means that condition of this
issue isn't satisfied.

  $ cat >> $HGRCPATH <<EOF
  > [extensions]
  > rebase=
  > mq=
  > 
  > [phases]
  > publish=False
  > 
  > [alias]
  > tglog = log -G --template "{rev}: '{desc}' {branches}\n"
  > tglogp = log -G --template "{rev}:{phase} '{desc}' {branches}\n"
  > EOF

Create repo a:

  $ hg init a
  $ cd a
  $ hg unbundle "$TESTDIR/bundles/rebase.hg"
  adding changesets
  adding manifests
  adding file changes
  added 8 changesets with 7 changes to 7 files (+2 heads)
  (run 'hg heads' to see heads, 'hg merge' to merge)
  $ hg up tip
  3 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ hg tglog
  @  7: 'H'
  |
  | o  6: 'G'
  |/|
  o |  5: 'F'
  | |
  | o  4: 'E'
  |/
  | o  3: 'D'
  | |
  | o  2: 'C'
  | |
  | o  1: 'B'
  |/
  o  0: 'A'
  
  $ cd ..


Rebasing B onto H and collapsing changesets with different phases:


  $ hg clone -q -u 3 a a1
  $ cd a1

  $ hg phase --force --secret 3

  $ cat > $TESTTMP/editor.sh <<EOF
  > echo "==== before editing"
  > cat \$1
  > echo "===="
  > echo "edited manually" >> \$1
  > EOF
  $ HGEDITOR="sh $TESTTMP/editor.sh" hg rebase --collapse --keepbranches -e
  rebasing 1:42ccdea3bb16 "B"
  note: rebase of 1:42ccdea3bb16 created no changes to commit
  rebasing 2:5fddd98957c8 "C"
  note: rebase of 2:5fddd98957c8 created no changes to commit
  rebasing 3:32af7686d403 "D"
  note: rebase of 3:32af7686d403 created no changes to commit
  ==== before editing
  Collapsed revision
  * B
  * C
  * D
  
  
  HG: Enter commit message.  Lines beginning with 'HG:' are removed.
  HG: Leave message empty to abort commit.
  HG: --
  HG: user: Nicolas Dumazet <[e-mail]>
  HG: branch 'default'
  HG: added B
  HG: added C
  HG: added D
  ====
  saved backup bundle to $TESTTMP/a1/.hg/strip-backup/42ccdea3bb16-3cb021d3-backup.hg (glob)

  $ hg tglogp
  @  5:secret 'Collapsed revision
  |  * B
  |  * C
  |  * D
  |
  |
  |  edited manually'
  o  4:draft 'H'
  |
  | o  3:draft 'G'
  |/|
  o |  2:draft 'F'
  | |
  | o  1:draft 'E'
  |/
  o  0:draft 'A'
  
  $ hg manifest --rev tip
  A
  B
  C
  D
  F
  H

  $ cd ..


Rebasing E onto H:

  $ hg clone -q -u . a a2
  $ cd a2

  $ hg phase --force --secret 6
  $ hg rebase --source 4 --collapse
  rebasing 4:9520eea781bc "E"
  note: rebase of 4:9520eea781bc created no changes to commit
  rebasing 6:eea13746799a "G"
  note: rebase of 6:eea13746799a created no changes to commit
  saved backup bundle to $TESTTMP/a2/.hg/strip-backup/9520eea781bc-fcd8edd4-backup.hg (glob)

  $ hg tglog
  o  6: 'Collapsed revision
  |  * E
  |  * G'
  @  5: 'H'
  |
  o  4: 'F'
  |
  | o  3: 'D'
  | |
  | o  2: 'C'
  | |
  | o  1: 'B'
  |/
  o  0: 'A'
  
  $ hg manifest --rev tip
  A
  E
  F
  H

  $ cd ..

Rebasing G onto H with custom message:

  $ hg clone -q -u . a a3
  $ cd a3

  $ hg rebase --base 6 -m 'custom message'
  abort: message can only be specified with collapse
  [255]

  $ cat > $TESTTMP/checkeditform.sh <<EOF
  > env | grep HGEDITFORM
  > true
  > EOF
  $ HGEDITOR="sh $TESTTMP/checkeditform.sh" hg rebase --source 4 --collapse -m 'custom message' -e
  rebasing 4:9520eea781bc "E"
  note: rebase of 4:9520eea781bc created no changes to commit
  rebasing 6:eea13746799a "G"
  note: rebase of 6:eea13746799a created no changes to commit
  HGEDITFORM=rebase.collapse
  saved backup bundle to $TESTTMP/a3/.hg/strip-backup/9520eea781bc-fcd8edd4-backup.hg (glob)

  $ hg tglog
  o  6: 'custom message'
  |
  @  5: 'H'
  |
  o  4: 'F'
  |
  | o  3: 'D'
  | |
  | o  2: 'C'
  | |
  | o  1: 'B'
  |/
  o  0: 'A'
  
  $ hg manifest --rev tip
  A
  E
  F
  H

  $ cd ..

Create repo b:

  $ hg init b
  $ cd b

  $ echo A > A
  $ hg ci -Am A
  adding A
  $ echo B > B
  $ hg ci -Am B
  adding B

  $ hg up -q 0

  $ echo C > C
  $ hg ci -Am C
  adding C
  created new head

  $ hg merge
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)

  $ echo D > D
  $ hg ci -Am D
  adding D

  $ hg up -q 1

  $ echo E > E
  $ hg ci -Am E
  adding E
  created new head

  $ echo F > F
  $ hg ci -Am F
  adding F

  $ hg merge
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg ci -m G

  $ hg up -q 0

  $ echo H > H
  $ hg ci -Am H
  adding H
  created new head

  $ hg tglog
  @  7: 'H'
  |
  | o    6: 'G'
  | |\
  | | o  5: 'F'
  | | |
  | | o  4: 'E'
  | | |
  | o |  3: 'D'
  | |\|
  | o |  2: 'C'
  |/ /
  | o  1: 'B'
  |/
  o  0: 'A'
  
  $ cd ..


Rebase and collapse - more than one external (fail):

  $ hg clone -q -u . b b1
  $ cd b1

  $ hg rebase -s 2 --collapse
  abort: unable to collapse on top of 7, there is more than one external parent: 1, 5
  [255]

Rebase and collapse - E onto H:

  $ hg rebase -s 4 --collapse # root (4) is not a merge
  rebasing 4:8a5212ebc852 "E"
  note: rebase of 4:8a5212ebc852 created no changes to commit
  rebasing 5:7f219660301f "F"
  note: rebase of 5:7f219660301f created no changes to commit
  rebasing 6:c772a8b2dc17 "G"
  note: rebase of 6:c772a8b2dc17 created no changes to commit
  saved backup bundle to $TESTTMP/b1/.hg/strip-backup/8a5212ebc852-75046b61-backup.hg (glob)

  $ hg tglog
  o    5: 'Collapsed revision
  |\   * E
  | |  * F
  | |  * G'
  | @  4: 'H'
  | |
  o |    3: 'D'
  |\ \
  | o |  2: 'C'
  | |/
  o /  1: 'B'
  |/
  o  0: 'A'
  
  $ hg manifest --rev tip
  A
  C
  D
  E
  F
  H

  $ cd ..




Test that branchheads cache is updated correctly when doing a strip in which
the parent of the ancestor node to be stripped does not become a head and also,
the parent of a node that is a child of the node stripped becomes a head (node
3). The code is now much simpler and we could just test a simpler scenario
We keep it the test this way in case new complexity is injected.

  $ hg clone -q -u . b b2
  $ cd b2

  $ hg heads --template="{rev}:{node} {branch}\n"
  7:c65502d4178782309ce0574c5ae6ee9485a9bafa default
  6:c772a8b2dc17629cec88a19d09c926c4814b12c7 default

  $ cat $TESTTMP/b2/.hg/cache/branch2-served
  c65502d4178782309ce0574c5ae6ee9485a9bafa 7
  c772a8b2dc17629cec88a19d09c926c4814b12c7 o default
  c65502d4178782309ce0574c5ae6ee9485a9bafa o default

  $ hg strip 4
  saved backup bundle to $TESTTMP/b2/.hg/strip-backup/8a5212ebc852-75046b61-backup.hg (glob)

  $ cat $TESTTMP/b2/.hg/cache/branch2-served
  c65502d4178782309ce0574c5ae6ee9485a9bafa 4
  2870ad076e541e714f3c2bc32826b5c6a6e5b040 o default
  c65502d4178782309ce0574c5ae6ee9485a9bafa o default

  $ hg heads --template="{rev}:{node} {branch}\n"
  4:c65502d4178782309ce0574c5ae6ee9485a9bafa default
  3:2870ad076e541e714f3c2bc32826b5c6a6e5b040 default

  $ cd ..






Create repo c:

  $ hg init c
  $ cd c

  $ echo A > A
  $ hg ci -Am A
  adding A
  $ echo B > B
  $ hg ci -Am B
  adding B

  $ hg up -q 0

  $ echo C > C
  $ hg ci -Am C
  adding C
  created new head

  $ hg merge
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)

  $ echo D > D
  $ hg ci -Am D
  adding D

  $ hg up -q 1

  $ echo E > E
  $ hg ci -Am E
  adding E
  created new head
  $ echo F > E
  $ hg ci -m 'F'

  $ echo G > G
  $ hg ci -Am G
  adding G

  $ hg merge
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)

  $ hg ci -m H

  $ hg up -q 0

  $ echo I > I
  $ hg ci -Am I
  adding I
  created new head

  $ hg tglog
  @  8: 'I'
  |
  | o    7: 'H'
  | |\
  | | o  6: 'G'
  | | |
  | | o  5: 'F'
  | | |
  | | o  4: 'E'
  | | |
  | o |  3: 'D'
  | |\|
  | o |  2: 'C'
  |/ /
  | o  1: 'B'
  |/
  o  0: 'A'
  
  $ cd ..


Rebase and collapse - E onto I:

  $ hg clone -q -u . c c1
  $ cd c1

  $ hg rebase -s 4 --collapse # root (4) is not a merge
  rebasing 4:8a5212ebc852 "E"
  note: rebase of 4:8a5212ebc852 created no changes to commit
  rebasing 5:dca5924bb570 "F"
  merging E
  note: rebase of 5:dca5924bb570 created no changes to commit
  rebasing 6:55a44ad28289 "G"
  note: rebase of 6:55a44ad28289 created no changes to commit
  rebasing 7:417d3b648079 "H"
  note: rebase of 7:417d3b648079 created no changes to commit
  saved backup bundle to $TESTTMP/c1/.hg/strip-backup/8a5212ebc852-f95d0879-backup.hg (glob)

  $ hg tglog
  o    5: 'Collapsed revision
  |\   * E
  | |  * F
  | |  * G
  | |  * H'
  | @  4: 'I'
  | |
  o |    3: 'D'
  |\ \
  | o |  2: 'C'
  | |/
  o /  1: 'B'
  |/
  o  0: 'A'
  
  $ hg manifest --rev tip
  A
  C
  D
  E
  G
  I

  $ hg up tip -q
  $ cat E
  F

  $ cd ..


Create repo d:

  $ hg init d
  $ cd d

  $ echo A > A
  $ hg ci -Am A
  adding A
  $ echo B > B
  $ hg ci -Am B
  adding B
  $ echo C > C
  $ hg ci -Am C
  adding C

  $ hg up -q 1

  $ echo D > D
  $ hg ci -Am D
  adding D
  created new head
  $ hg merge
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)

  $ hg ci -m E

  $ hg up -q 0

  $ echo F > F
  $ hg ci -Am F
  adding F
  created new head

  $ hg tglog
  @  5: 'F'
  |
  | o    4: 'E'
  | |\
  | | o  3: 'D'
  | | |
  | o |  2: 'C'
  | |/
  | o  1: 'B'
  |/
  o  0: 'A'
  
  $ cd ..


Rebase and collapse - B onto F:

  $ hg clone -q -u . d d1
  $ cd d1

  $ hg rebase -s 1 --collapse
  rebasing 1:27547f69f254 "B"
  note: rebase of 1:27547f69f254 created no changes to commit
  rebasing 2:f838bfaca5c7 "C"
  note: rebase of 2:f838bfaca5c7 created no changes to commit
  rebasing 3:7bbcd6078bcc "D"
  note: rebase of 3:7bbcd6078bcc created no changes to commit
  rebasing 4:0a42590ed746 "E"
  note: rebase of 4:0a42590ed746 created no changes to commit
  saved backup bundle to $TESTTMP/d1/.hg/strip-backup/27547f69f254-9a3f7d92-backup.hg (glob)

  $ hg tglog
  o  2: 'Collapsed revision
  |  * B
  |  * C
  |  * D
  |  * E'
  @  1: 'F'
  |
  o  0: 'A'
  
  $ hg manifest --rev tip
  A
  B
  C
  D
  F

Interactions between collapse and keepbranches
  $ cd ..
  $ hg init e
  $ cd e
  $ echo 'a' > a
  $ hg ci -Am 'A'
  adding a

  $ hg branch 'one'
  marked working directory as branch one
  (branches are permanent and global, did you want a bookmark?)
  $ echo 'b' > b
  $ hg ci -Am 'B'
  adding b

  $ hg branch 'two'
  marked working directory as branch two
  $ echo 'c' > c
  $ hg ci -Am 'C'
  adding c

  $ hg up -q 0
  $ echo 'd' > d
  $ hg ci -Am 'D'
  adding d

  $ hg tglog
  @  3: 'D'
  |
  | o  2: 'C' two
  | |
  | o  1: 'B' one
  |/
  o  0: 'A'
  
  $ hg rebase --keepbranches --collapse -s 1 -d 3
  abort: cannot collapse multiple named branches
  [255]

  $ repeatchange() {
  >   hg checkout $1
  >   hg cp d z
  >   echo blah >> z
  >   hg commit -Am "$2" --user "$3"
  > }
  $ repeatchange 3 "E" "user1"
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ repeatchange 3 "E" "user2"
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved
  created new head
  $ hg tglog
  @  5: 'E'
  |
  | o  4: 'E'
  |/
  o  3: 'D'
  |
  | o  2: 'C' two
  | |
  | o  1: 'B' one
  |/
  o  0: 'A'
  
  $ hg rebase -s 5 -d 4
  rebasing 5:fbfb97b1089a "E" (tip)
  note: rebase of 5:fbfb97b1089a created no changes to commit
  saved backup bundle to $TESTTMP/e/.hg/strip-backup/fbfb97b1089a-553e1d85-backup.hg (glob)
  $ hg tglog
  @  4: 'E'
  |
  o  3: 'D'
  |
  | o  2: 'C' two
  | |
  | o  1: 'B' one
  |/
  o  0: 'A'
  
  $ hg export tip
  # HG changeset patch
  # User user1
  # Date 0 0
  #      Thu Jan 01 00:00:00 1970 +0000
  # Node ID f338eb3c2c7cc5b5915676a2376ba7ac558c5213
  # Parent  41acb9dca9eb976e84cd21fcb756b4afa5a35c09
  E
  
  diff -r 41acb9dca9eb -r f338eb3c2c7c z
  --- /dev/null	Thu Jan 01 00:00:00 1970 +0000
  +++ b/z	Thu Jan 01 00:00:00 1970 +0000
  @@ -0,0 +1,2 @@
  +d
  +blah

  $ cd ..

Rebase, collapse and copies

  $ hg init copies
  $ cd copies
  $ hg unbundle "$TESTDIR/bundles/renames.hg"
  adding changesets
  adding manifests
  adding file changes
  added 4 changesets with 11 changes to 7 files (+1 heads)
  (run 'hg heads' to see heads, 'hg merge' to merge)
  $ hg up -q tip
  $ hg tglog
  @  3: 'move2'
  |
  o  2: 'move1'
  |
  | o  1: 'change'
  |/
  o  0: 'add'
  
  $ hg rebase --collapse -d 1
  rebasing 2:6e7340ee38c0 "move1"
  merging a and d to d
  merging b and e to e
  merging c and f to f
  note: rebase of 2:6e7340ee38c0 created no changes to commit
  rebasing 3:338e84e2e558 "move2" (tip)
  merging f and c to c
  merging e and g to g
  note: rebase of 3:338e84e2e558 created no changes to commit
  saved backup bundle to $TESTTMP/copies/.hg/strip-backup/6e7340ee38c0-ef8ef003-backup.hg (glob)
  $ hg st
  $ hg st --copies --change tip
  A d
    a
  A g
    b
  R b
  $ hg up tip -q
  $ cat c
  c
  c
  $ cat d
  a
  a
  $ cat g
  b
  b
  $ hg log -r . --template "{file_copies}\n"
  d (a)g (b)

Test collapsing a middle revision in-place

  $ hg tglog
  @  2: 'Collapsed revision
  |  * move1
  |  * move2'
  o  1: 'change'
  |
  o  0: 'add'
  
  $ hg rebase --collapse -r 1 -d 0
  abort: can't remove original changesets with unrebased descendants
  (use --keep to keep original changesets)
  [255]

Test collapsing in place

  $ hg rebase --collapse -b . -d 0
  rebasing 1:1352765a01d4 "change"
  note: rebase of 1:1352765a01d4 created no changes to commit
  rebasing 2:64b456429f67 "Collapsed revision" (tip)
  note: rebase of 2:64b456429f67 created no changes to commit
  saved backup bundle to $TESTTMP/copies/.hg/strip-backup/1352765a01d4-45a352ea-backup.hg (glob)
  $ hg st --change tip --copies
  M a
  M c
  A d
    a
  A g
    b
  R b
  $ hg up tip -q
  $ cat a
  a
  a
  $ cat c
  c
  c
  $ cat d
  a
  a
  $ cat g
  b
  b
  $ cd ..


Test stripping a revision with another child

  $ hg init f
  $ cd f

  $ echo A > A
  $ hg ci -Am A
  adding A
  $ echo B > B
  $ hg ci -Am B
  adding B

  $ hg up -q 0

  $ echo C > C
  $ hg ci -Am C
  adding C
  created new head

  $ hg tglog
  @  2: 'C'
  |
  | o  1: 'B'
  |/
  o  0: 'A'
  


  $ hg heads --template="{rev}:{node} {branch}: {desc}\n"
  2:c5cefa58fd557f84b72b87f970135984337acbc5 default: C
  1:27547f69f25460a52fff66ad004e58da7ad3fb56 default: B

  $ hg strip 2
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved
  saved backup bundle to $TESTTMP/f/.hg/strip-backup/c5cefa58fd55-629429f4-backup.hg (glob)

  $ hg tglog
  o  1: 'B'
  |
  @  0: 'A'
  


  $ hg heads --template="{rev}:{node} {branch}: {desc}\n"
  1:27547f69f25460a52fff66ad004e58da7ad3fb56 default: B

  $ cd ..

Test collapsing changes that add then remove a file

  $ hg init collapseaddremove
  $ cd collapseaddremove

  $ touch base
  $ hg commit -Am base
  adding base
  $ touch a
  $ hg commit -Am a
  adding a
  $ hg rm a
  $ touch b
  $ hg commit -Am b
  adding b
  $ hg book foo
  $ hg rebase -d 0 -r "1::2" --collapse -m collapsed
  rebasing 1:6d8d9f24eec3 "a"
  note: rebase of 1:6d8d9f24eec3 created no changes to commit
  rebasing 2:1cc73eca5ecc "b" (tip foo)
  note: rebase of 2:1cc73eca5ecc created no changes to commit
  saved backup bundle to $TESTTMP/collapseaddremove/.hg/strip-backup/6d8d9f24eec3-77d3b6e2-backup.hg (glob)
  $ hg log -G --template "{rev}: '{desc}' {bookmarks}"
  @  1: 'collapsed' foo
  |
  o  0: 'base'
  
  $ hg manifest --rev tip
  b
  base

  $ cd ..