view tests/test-rename-merge2.t @ 25757:4d1382fd96ff

context: write dirstate out explicitly at the end of markcommitted

To detect change of a file without redundant comparison of file
content, dirstate recognizes a file as certainly clean, if:

  (1) it is already known as "normal",
  (2) dirstate entry for it has valid (= not "-1") timestamp, and
  (3) mode, size and timestamp of it on the filesystem are as same as
      ones expected in dirstate

This works as expected in many cases, but doesn't in the corner case
that changing a file keeps mode, size and timestamp of it on the
filesystem.

The timetable below shows steps in one of typical such situations:

  ---- ----------------------------------- ----------------
                                           timestamp of "f"
                                           ----------------
                                           dirstate   file-
  time          action                     mem  file  system
  ---- ----------------------------------- ---- ----- -----
   *                                             ***    ***
       - 'hg transplant REV1 REV2 ...'
         - transplanting REV1
           ....
   N
           - change "f", but keep size                   N
             (via 'patch.patch()')
           - 'dirstate.normal("f")'          N   ***
             (via 'repo.commit()')

         - transplanting REV2
           - change "f", but keep size                   N
             (via 'patch.patch()')
           - aborted while patching
  N+1
         - release wlock
           - 'dirstate.write()'              N    N      N

       - 'hg status' shows "r1" as "clean"   N    N      N
  ---- ----------------------------------- ---- ----- -----

The most important point is that 'dirstate.write()' is executed at N+1
or later. This causes writing dirstate timestamp N of "f" out
successfully. If it is executed at N, 'parsers.pack_dirstate()'
replaces timestamp N with "-1" before actual writing dirstate out.

This issue can occur when 'hg transplant' satisfies conditions below:

  - multiple revisions to be transplanted change the same file
  - those revisions don't change mode and size of the file, and
  - the 2nd or later revision of them fails after changing the file

The root cause of this issue is that files are changed without
flushing in-memory dirstate changes via 'repo.commit()' (even though
omitting 'dirstate.normallookup()' on files changed by 'patch.patch()'
for efficiency also causes this issue).

To detect changes of files correctly, this patch writes in-memory
dirstate changes out explicitly after marking files as clean in
'committablectx.markcommitted()', which is invoked via
'repo.commit()'.

After this change, timetable is changed as below:

  ---- ----------------------------------- ----------------
                                           timestamp of "f"
                                           ----------------
                                           dirstate   file-
  time          action                     mem  file  system
  ---- ----------------------------------- ---- ----- -----
   *                                             ***    ***
       - 'hg transplant REV1 REV2 ...'
         - transplanting REV1
           ....
   N
           - change "f", but keep size                   N
             (via 'patch.patch()')
           - 'dirstate.normal("f")'          N    ***
             (via 'repo.commit()')
       ----------------------------------- ---- ----- -----
           - 'dirsttate.write()'            -1    -1
       ----------------------------------- ---- ----- -----
         - transplanting REV2
           - change "f", but keep size                   N
             (via 'patch.patch()')
           - aborted while patching
  N+1
         - release wlock
           - 'dirstate.write()'              -1   -1     N

       - 'hg status' shows "r1" as "clean"   -1   -1     N
  ---- ----------------------------------- ---- ----- -----

To reproduce this issue in tests certainly, this patch emulates some
timing critical actions as below:

  - change "f" at N

    'patch.patch()' with 'fakepatchtime.py' explicitly changes mtime
    of patched files to "2000-01-01 00:00" (= N).

  - 'dirstate.write()' via 'repo.commit()' at N

    'fakedirstatewritetime.py' forces 'pack_dirstate()' to use
    "2000-01-01 00:00" as "now", only if 'pack_dirstate()' is invoked
    via 'committablectx.markcommitted()'.

  - 'dirstate.write()' via releasing wlock at N+1 (or "not at N")

    'pack_dirstate()' via releasing wlock uses actual timestamp at
    runtime as "now", and it should be different from the "2000-01-01
    00:00" of "f".

BTW, this patch doesn't test cases below, even though 'patch.patch()'
is used similarly in these cases:

  1. failure of 'hg import' or 'hg qpush'

  2. success of 'hg import', 'hg qpush' or 'hg transplant'

Case (1) above doesn't cause this kind of issue, because:

  - if patching is aborted by conflicts, changed files are committed

    changed files are marked as CLEAN, even though they are partially
    patched.

  - otherwise, dirstate are fully restored by 'dirstateguard'

    For example in timetable above, timestamp of "f" in .hg/dirstate
    is restored to -1 (or less than N), and subsequent 'hg status' can
    detect changes correctly.

Case (2) always causes 'repo.status()' invocation via 'repo.commit()'
just after changing files inside same wlock scope.

  ---- ----------------------------------- ----------------
                                           timestamp of "f"
                                           ----------------
                                           dirstate   file-
  time          action                     mem  file  system
  ---- ----------------------------------- ---- ----- -----
  N                                              ***   ***
       - make file "f" clean                            N

       - execute 'hg foobar'
         ....
         - 'dirstate.normal("f")'           N    ***
           (e.g. via dirty check
            or previous 'repo.commit()')

         - change "f", but keep size                    N
         - 'repo.status()' (*1)
           (via 'repo.commit()')
  ---- ----------------------------------- ---- ----- -----

At a glance, 'repo.status()' at (*1) seems to cause similar issue (=
"changed files are treated as clean"), but actually doesn't.

'dirstate._lastnormaltime' should be N at (*1) above, because
'dirstate.normal()' via dirty check is finished at N.

Therefore, "f" changed at N (= 'dirstate._lastnormaltime') is forcibly
treated as "unsure" at (*1), and changes are detected as expected (see
'dirstate.status()' for detail).

If 'hg import' is executed with '--no-commit', 'repo.status()' isn't
invoked just after changing files inside same wlock scope.

But preceding 'dirstate.normal()' is invoked inside another wlock
scope via 'cmdutil.bailifchanged()', and in-memory changes should be
flushed at the end of that scope.

Therefore, timestamp N of clean "f" should be replaced by -1, if
'dirstate.write()' is invoked at N. It means that condition of this
issue isn't satisfied.

  $ mkdir -p t
  $ cd t
  $ cat <<EOF > merge
  > import sys, os
  > f = open(sys.argv[1], "wb")
  > f.write("merge %s %s %s" % (sys.argv[1], sys.argv[2], sys.argv[3]))
  > f.close()
  > EOF

perform a test merge with possible renaming
args:
$1 = action in local branch
$2 = action in remote branch
$3 = action in working dir
$4 = expected result

  $ tm()
  > {
  >     hg init t
  >     cd t
  >     echo "[merge]" >> .hg/hgrc
  >     echo "followcopies = 1" >> .hg/hgrc
  > 
  >     # base
  >     echo base > a
  >     echo base > rev # used to force commits
  >     hg add a rev
  >     hg ci -m "base"
  > 
  >     # remote
  >     echo remote > rev
  >     if [ "$2" != "" ] ; then $2 ; fi
  >     hg ci -m "remote"
  > 
  >     # local
  >     hg co -q 0
  >     echo local > rev
  >     if [ "$1" != "" ] ; then $1 ; fi
  >     hg ci -m "local"
  > 
  >     # working dir
  >     echo local > rev
  >     if [ "$3" != "" ] ; then $3 ; fi
  > 
  >     # merge
  >     echo "--------------"
  >     echo "test L:$1 R:$2 W:$3 - $4"
  >     echo "--------------"
  >     hg merge -y --debug --traceback --tool="python ../merge"
  > 
  >     echo "--------------"
  >     hg status -camC -X rev
  > 
  >     hg ci -m "merge"
  > 
  >     echo "--------------"
  >     echo
  > 
  >     cd ..
  >     rm -r t
  > }
  $ up() {
  >     cp rev $1
  >     hg add $1 2> /dev/null
  >     if [ "$2" != "" ] ; then
  >         cp rev $2
  >         hg add $2 2> /dev/null
  >     fi
  > }
  $ uc() { up $1; hg cp $1 $2; } # update + copy
  $ um() { up $1; hg mv $1 $2; }
  $ nc() { hg cp $1 $2; } # just copy
  $ nm() { hg mv $1 $2; } # just move
  $ tm "up a  " "nc a b" "      " "1  get local a to b"
  created new head
  --------------
  test L:up a   R:nc a b W:       - 1  get local a to b
  --------------
    searching for copies back to rev 1
    unmatched files in other:
     b
    all copies found (* = to merge, ! = divergent, % = renamed and deleted):
     src: 'a' -> dst: 'b' *
    checking for directory renames
  resolving manifests
   branchmerge: True, force: False, partial: False
   ancestor: 924404dff337, local: e300d1c794ec+, remote: 4ce40f5aca24
   preserving a for resolve of b
   preserving rev for resolve of rev
   a: remote unchanged -> k
   b: remote copied from a -> m
  picked tool 'python ../merge' for b (binary False symlink False)
  merging a and b to b
  my b@e300d1c794ec+ other b@4ce40f5aca24 ancestor a@924404dff337
   premerge successful
   rev: versions differ -> m
  picked tool 'python ../merge' for rev (binary False symlink False)
  merging rev
  my rev@e300d1c794ec+ other rev@4ce40f5aca24 ancestor rev@924404dff337
  launching merge tool: python ../merge *$TESTTMP/t/t/rev* * * (glob)
  merge tool returned: 0
  0 files updated, 2 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  --------------
  M b
    a
  C a
  --------------
  
  $ tm "nc a b" "up a  " "      " "2  get rem change to a and b"
  created new head
  --------------
  test L:nc a b R:up a   W:       - 2  get rem change to a and b
  --------------
    searching for copies back to rev 1
    unmatched files in local:
     b
    all copies found (* = to merge, ! = divergent, % = renamed and deleted):
     src: 'a' -> dst: 'b' *
    checking for directory renames
  resolving manifests
   branchmerge: True, force: False, partial: False
   ancestor: 924404dff337, local: 86a2aa42fc76+, remote: f4db7e329e71
   preserving b for resolve of b
   preserving rev for resolve of rev
   a: remote is newer -> g
  getting a
   b: local copied/moved from a -> m
  picked tool 'python ../merge' for b (binary False symlink False)
  merging b and a to b
  my b@86a2aa42fc76+ other a@f4db7e329e71 ancestor a@924404dff337
   premerge successful
   rev: versions differ -> m
  picked tool 'python ../merge' for rev (binary False symlink False)
  merging rev
  my rev@86a2aa42fc76+ other rev@f4db7e329e71 ancestor rev@924404dff337
  launching merge tool: python ../merge *$TESTTMP/t/t/rev* * (glob)
  merge tool returned: 0
  1 files updated, 2 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  --------------
  M a
  M b
    a
  --------------
  
  $ tm "up a  " "nm a b" "      " "3  get local a change to b, remove a"
  created new head
  --------------
  test L:up a   R:nm a b W:       - 3  get local a change to b, remove a
  --------------
    searching for copies back to rev 1
    unmatched files in other:
     b
    all copies found (* = to merge, ! = divergent, % = renamed and deleted):
     src: 'a' -> dst: 'b' *
    checking for directory renames
  resolving manifests
   branchmerge: True, force: False, partial: False
   ancestor: 924404dff337, local: e300d1c794ec+, remote: bdb19105162a
   preserving a for resolve of b
   preserving rev for resolve of rev
  removing a
   b: remote moved from a -> m
  picked tool 'python ../merge' for b (binary False symlink False)
  merging a and b to b
  my b@e300d1c794ec+ other b@bdb19105162a ancestor a@924404dff337
   premerge successful
   rev: versions differ -> m
  picked tool 'python ../merge' for rev (binary False symlink False)
  merging rev
  my rev@e300d1c794ec+ other rev@bdb19105162a ancestor rev@924404dff337
  launching merge tool: python ../merge *$TESTTMP/t/t/rev* * * (glob)
  merge tool returned: 0
  0 files updated, 2 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  --------------
  M b
    a
  --------------
  
  $ tm "nm a b" "up a  " "      " "4  get remote change to b"
  created new head
  --------------
  test L:nm a b R:up a   W:       - 4  get remote change to b
  --------------
    searching for copies back to rev 1
    unmatched files in local:
     b
    all copies found (* = to merge, ! = divergent, % = renamed and deleted):
     src: 'a' -> dst: 'b' *
    checking for directory renames
  resolving manifests
   branchmerge: True, force: False, partial: False
   ancestor: 924404dff337, local: 02963e448370+, remote: f4db7e329e71
   preserving b for resolve of b
   preserving rev for resolve of rev
   b: local copied/moved from a -> m
  picked tool 'python ../merge' for b (binary False symlink False)
  merging b and a to b
  my b@02963e448370+ other a@f4db7e329e71 ancestor a@924404dff337
   premerge successful
   rev: versions differ -> m
  picked tool 'python ../merge' for rev (binary False symlink False)
  merging rev
  my rev@02963e448370+ other rev@f4db7e329e71 ancestor rev@924404dff337
  launching merge tool: python ../merge *$TESTTMP/t/t/rev* * * (glob)
  merge tool returned: 0
  0 files updated, 2 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  --------------
  M b
    a
  --------------
  
  $ tm "      " "nc a b" "      " "5  get b"
  created new head
  --------------
  test L:       R:nc a b W:       - 5  get b
  --------------
    searching for copies back to rev 1
    unmatched files in other:
     b
    all copies found (* = to merge, ! = divergent, % = renamed and deleted):
     src: 'a' -> dst: 'b' 
    checking for directory renames
  resolving manifests
   branchmerge: True, force: False, partial: False
   ancestor: 924404dff337, local: 94b33a1b7f2d+, remote: 4ce40f5aca24
   preserving rev for resolve of rev
   b: remote created -> g
  getting b
   rev: versions differ -> m
  picked tool 'python ../merge' for rev (binary False symlink False)
  merging rev
  my rev@94b33a1b7f2d+ other rev@4ce40f5aca24 ancestor rev@924404dff337
  launching merge tool: python ../merge *$TESTTMP/t/t/rev* * * (glob)
  merge tool returned: 0
  1 files updated, 1 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  --------------
  M b
  C a
  --------------
  
  $ tm "nc a b" "      " "      " "6  nothing"
  created new head
  --------------
  test L:nc a b R:       W:       - 6  nothing
  --------------
    searching for copies back to rev 1
    unmatched files in local:
     b
    all copies found (* = to merge, ! = divergent, % = renamed and deleted):
     src: 'a' -> dst: 'b' 
    checking for directory renames
  resolving manifests
   branchmerge: True, force: False, partial: False
   ancestor: 924404dff337, local: 86a2aa42fc76+, remote: 97c705ade336
   preserving rev for resolve of rev
   rev: versions differ -> m
  picked tool 'python ../merge' for rev (binary False symlink False)
  merging rev
  my rev@86a2aa42fc76+ other rev@97c705ade336 ancestor rev@924404dff337
  launching merge tool: python ../merge *$TESTTMP/t/t/rev* * * (glob)
  merge tool returned: 0
  0 files updated, 1 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  --------------
  C a
  C b
  --------------
  
  $ tm "      " "nm a b" "      " "7  get b"
  created new head
  --------------
  test L:       R:nm a b W:       - 7  get b
  --------------
    searching for copies back to rev 1
    unmatched files in other:
     b
    all copies found (* = to merge, ! = divergent, % = renamed and deleted):
     src: 'a' -> dst: 'b' 
    checking for directory renames
  resolving manifests
   branchmerge: True, force: False, partial: False
   ancestor: 924404dff337, local: 94b33a1b7f2d+, remote: bdb19105162a
   preserving rev for resolve of rev
   a: other deleted -> r
  removing a
   b: remote created -> g
  getting b
   rev: versions differ -> m
  picked tool 'python ../merge' for rev (binary False symlink False)
  merging rev
  my rev@94b33a1b7f2d+ other rev@bdb19105162a ancestor rev@924404dff337
  launching merge tool: python ../merge *$TESTTMP/t/t/rev* * * (glob)
  merge tool returned: 0
  1 files updated, 1 files merged, 1 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  --------------
  M b
  --------------
  
  $ tm "nm a b" "      " "      " "8  nothing"
  created new head
  --------------
  test L:nm a b R:       W:       - 8  nothing
  --------------
    searching for copies back to rev 1
    unmatched files in local:
     b
    all copies found (* = to merge, ! = divergent, % = renamed and deleted):
     src: 'a' -> dst: 'b' 
    checking for directory renames
  resolving manifests
   branchmerge: True, force: False, partial: False
   ancestor: 924404dff337, local: 02963e448370+, remote: 97c705ade336
   preserving rev for resolve of rev
   rev: versions differ -> m
  picked tool 'python ../merge' for rev (binary False symlink False)
  merging rev
  my rev@02963e448370+ other rev@97c705ade336 ancestor rev@924404dff337
  launching merge tool: python ../merge *$TESTTMP/t/t/rev* * * (glob)
  merge tool returned: 0
  0 files updated, 1 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  --------------
  C b
  --------------
  
  $ tm "um a b" "um a b" "      " "9  do merge with ancestor in a"
  created new head
  --------------
  test L:um a b R:um a b W:       - 9  do merge with ancestor in a
  --------------
    searching for copies back to rev 1
    unmatched files new in both:
     b
  resolving manifests
   branchmerge: True, force: False, partial: False
   ancestor: 924404dff337, local: 62e7bf090eba+, remote: 49b6d8032493
   preserving b for resolve of b
   preserving rev for resolve of rev
   b: both renamed from a -> m
  picked tool 'python ../merge' for b (binary False symlink False)
  merging b
  my b@62e7bf090eba+ other b@49b6d8032493 ancestor a@924404dff337
  launching merge tool: python ../merge *$TESTTMP/t/t/b* * * (glob)
  merge tool returned: 0
   rev: versions differ -> m
  picked tool 'python ../merge' for rev (binary False symlink False)
  merging rev
  my rev@62e7bf090eba+ other rev@49b6d8032493 ancestor rev@924404dff337
  launching merge tool: python ../merge *$TESTTMP/t/t/rev* * * (glob)
  merge tool returned: 0
  0 files updated, 2 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  --------------
  M b
  --------------
  

m "um a c" "um x c" "      " "10 do merge with no ancestor"

  $ tm "nm a b" "nm a c" "      " "11 get c, keep b"
  created new head
  --------------
  test L:nm a b R:nm a c W:       - 11 get c, keep b
  --------------
    searching for copies back to rev 1
    unmatched files in local:
     b
    unmatched files in other:
     c
    all copies found (* = to merge, ! = divergent, % = renamed and deleted):
     src: 'a' -> dst: 'b' !
     src: 'a' -> dst: 'c' !
    checking for directory renames
  resolving manifests
   branchmerge: True, force: False, partial: False
   ancestor: 924404dff337, local: 02963e448370+, remote: fe905ef2c33e
   preserving rev for resolve of rev
   c: remote created -> g
  getting c
   rev: versions differ -> m
  picked tool 'python ../merge' for rev (binary False symlink False)
  merging rev
  my rev@02963e448370+ other rev@fe905ef2c33e ancestor rev@924404dff337
  launching merge tool: python ../merge *$TESTTMP/t/t/rev* * * (glob)
  merge tool returned: 0
  note: possible conflict - a was renamed multiple times to:
   b
   c
  1 files updated, 1 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  --------------
  M c
  C b
  --------------
  
  $ tm "nc a b" "up b  " "      " "12 merge b no ancestor"
  created new head
  --------------
  test L:nc a b R:up b   W:       - 12 merge b no ancestor
  --------------
    searching for copies back to rev 1
    unmatched files new in both:
     b
  resolving manifests
   branchmerge: True, force: False, partial: False
   ancestor: 924404dff337, local: 86a2aa42fc76+, remote: af30c7647fc7
   preserving b for resolve of b
   preserving rev for resolve of rev
   b: both created -> m
  picked tool 'python ../merge' for b (binary False symlink False)
  merging b
  my b@86a2aa42fc76+ other b@af30c7647fc7 ancestor b@000000000000
  launching merge tool: python ../merge *$TESTTMP/t/t/b* * * (glob)
  merge tool returned: 0
   rev: versions differ -> m
  picked tool 'python ../merge' for rev (binary False symlink False)
  merging rev
  my rev@86a2aa42fc76+ other rev@af30c7647fc7 ancestor rev@924404dff337
  launching merge tool: python ../merge *$TESTTMP/t/t/rev* * * (glob)
  merge tool returned: 0
  0 files updated, 2 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  --------------
  M b
  C a
  --------------
  
  $ tm "up b  " "nm a b" "      " "13 merge b no ancestor"
  created new head
  --------------
  test L:up b   R:nm a b W:       - 13 merge b no ancestor
  --------------
    searching for copies back to rev 1
    unmatched files new in both:
     b
  resolving manifests
   branchmerge: True, force: False, partial: False
   ancestor: 924404dff337, local: 59318016310c+, remote: bdb19105162a
   preserving b for resolve of b
   preserving rev for resolve of rev
   a: other deleted -> r
  removing a
   b: both created -> m
  picked tool 'python ../merge' for b (binary False symlink False)
  merging b
  my b@59318016310c+ other b@bdb19105162a ancestor b@000000000000
  launching merge tool: python ../merge *$TESTTMP/t/t/b* * * (glob)
  merge tool returned: 0
   rev: versions differ -> m
  picked tool 'python ../merge' for rev (binary False symlink False)
  merging rev
  my rev@59318016310c+ other rev@bdb19105162a ancestor rev@924404dff337
  launching merge tool: python ../merge *$TESTTMP/t/t/rev* * * (glob)
  merge tool returned: 0
  0 files updated, 2 files merged, 1 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  --------------
  M b
  --------------
  
  $ tm "nc a b" "up a b" "      " "14 merge b no ancestor"
  created new head
  --------------
  test L:nc a b R:up a b W:       - 14 merge b no ancestor
  --------------
    searching for copies back to rev 1
    unmatched files new in both:
     b
  resolving manifests
   branchmerge: True, force: False, partial: False
   ancestor: 924404dff337, local: 86a2aa42fc76+, remote: 8dbce441892a
   preserving b for resolve of b
   preserving rev for resolve of rev
   a: remote is newer -> g
  getting a
   b: both created -> m
  picked tool 'python ../merge' for b (binary False symlink False)
  merging b
  my b@86a2aa42fc76+ other b@8dbce441892a ancestor b@000000000000
  launching merge tool: python ../merge *$TESTTMP/t/t/b* * * (glob)
  merge tool returned: 0
   rev: versions differ -> m
  picked tool 'python ../merge' for rev (binary False symlink False)
  merging rev
  my rev@86a2aa42fc76+ other rev@8dbce441892a ancestor rev@924404dff337
  launching merge tool: python ../merge *$TESTTMP/t/t/rev* * * (glob)
  merge tool returned: 0
  1 files updated, 2 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  --------------
  M a
  M b
  --------------
  
  $ tm "up b  " "nm a b" "      " "15 merge b no ancestor, remove a"
  created new head
  --------------
  test L:up b   R:nm a b W:       - 15 merge b no ancestor, remove a
  --------------
    searching for copies back to rev 1
    unmatched files new in both:
     b
  resolving manifests
   branchmerge: True, force: False, partial: False
   ancestor: 924404dff337, local: 59318016310c+, remote: bdb19105162a
   preserving b for resolve of b
   preserving rev for resolve of rev
   a: other deleted -> r
  removing a
   b: both created -> m
  picked tool 'python ../merge' for b (binary False symlink False)
  merging b
  my b@59318016310c+ other b@bdb19105162a ancestor b@000000000000
  launching merge tool: python ../merge *$TESTTMP/t/t/b* * * (glob)
  merge tool returned: 0
   rev: versions differ -> m
  picked tool 'python ../merge' for rev (binary False symlink False)
  merging rev
  my rev@59318016310c+ other rev@bdb19105162a ancestor rev@924404dff337
  launching merge tool: python ../merge *$TESTTMP/t/t/rev* * * (glob)
  merge tool returned: 0
  0 files updated, 2 files merged, 1 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  --------------
  M b
  --------------
  
  $ tm "nc a b" "up a b" "      " "16 get a, merge b no ancestor"
  created new head
  --------------
  test L:nc a b R:up a b W:       - 16 get a, merge b no ancestor
  --------------
    searching for copies back to rev 1
    unmatched files new in both:
     b
  resolving manifests
   branchmerge: True, force: False, partial: False
   ancestor: 924404dff337, local: 86a2aa42fc76+, remote: 8dbce441892a
   preserving b for resolve of b
   preserving rev for resolve of rev
   a: remote is newer -> g
  getting a
   b: both created -> m
  picked tool 'python ../merge' for b (binary False symlink False)
  merging b
  my b@86a2aa42fc76+ other b@8dbce441892a ancestor b@000000000000
  launching merge tool: python ../merge *$TESTTMP/t/t/b* * * (glob)
  merge tool returned: 0
   rev: versions differ -> m
  picked tool 'python ../merge' for rev (binary False symlink False)
  merging rev
  my rev@86a2aa42fc76+ other rev@8dbce441892a ancestor rev@924404dff337
  launching merge tool: python ../merge *$TESTTMP/t/t/rev* * * (glob)
  merge tool returned: 0
  1 files updated, 2 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  --------------
  M a
  M b
  --------------
  
  $ tm "up a b" "nc a b" "      " "17 keep a, merge b no ancestor"
  created new head
  --------------
  test L:up a b R:nc a b W:       - 17 keep a, merge b no ancestor
  --------------
    searching for copies back to rev 1
    unmatched files new in both:
     b
  resolving manifests
   branchmerge: True, force: False, partial: False
   ancestor: 924404dff337, local: 0b76e65c8289+, remote: 4ce40f5aca24
   preserving b for resolve of b
   preserving rev for resolve of rev
   a: remote unchanged -> k
   b: both created -> m
  picked tool 'python ../merge' for b (binary False symlink False)
  merging b
  my b@0b76e65c8289+ other b@4ce40f5aca24 ancestor b@000000000000
  launching merge tool: python ../merge *$TESTTMP/t/t/b* * * (glob)
  merge tool returned: 0
   rev: versions differ -> m
  picked tool 'python ../merge' for rev (binary False symlink False)
  merging rev
  my rev@0b76e65c8289+ other rev@4ce40f5aca24 ancestor rev@924404dff337
  launching merge tool: python ../merge *$TESTTMP/t/t/rev* * * (glob)
  merge tool returned: 0
  0 files updated, 2 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  --------------
  M b
  C a
  --------------
  
  $ tm "nm a b" "up a b" "      " "18 merge b no ancestor"
  created new head
  --------------
  test L:nm a b R:up a b W:       - 18 merge b no ancestor
  --------------
    searching for copies back to rev 1
    unmatched files new in both:
     b
  resolving manifests
   branchmerge: True, force: False, partial: False
   ancestor: 924404dff337, local: 02963e448370+, remote: 8dbce441892a
  remote changed a which local deleted
  use (c)hanged version or leave (d)eleted? c
   preserving b for resolve of b
   preserving rev for resolve of rev
   a: prompt recreating -> g
  getting a
   b: both created -> m
  picked tool 'python ../merge' for b (binary False symlink False)
  merging b
  my b@02963e448370+ other b@8dbce441892a ancestor b@000000000000
  launching merge tool: python ../merge *$TESTTMP/t/t/b* * * (glob)
  merge tool returned: 0
   rev: versions differ -> m
  picked tool 'python ../merge' for rev (binary False symlink False)
  merging rev
  my rev@02963e448370+ other rev@8dbce441892a ancestor rev@924404dff337
  launching merge tool: python ../merge *$TESTTMP/t/t/rev* * * (glob)
  merge tool returned: 0
  1 files updated, 2 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  --------------
  M a
  M b
  --------------
  
  $ tm "up a b" "nm a b" "      " "19 merge b no ancestor, prompt remove a"
  created new head
  --------------
  test L:up a b R:nm a b W:       - 19 merge b no ancestor, prompt remove a
  --------------
    searching for copies back to rev 1
    unmatched files new in both:
     b
  resolving manifests
   branchmerge: True, force: False, partial: False
   ancestor: 924404dff337, local: 0b76e65c8289+, remote: bdb19105162a
  local changed a which remote deleted
  use (c)hanged version or (d)elete? c
   preserving b for resolve of b
   preserving rev for resolve of rev
   a: prompt keep -> a
   b: both created -> m
  picked tool 'python ../merge' for b (binary False symlink False)
  merging b
  my b@0b76e65c8289+ other b@bdb19105162a ancestor b@000000000000
  launching merge tool: python ../merge *$TESTTMP/t/t/b* * * (glob)
  merge tool returned: 0
   rev: versions differ -> m
  picked tool 'python ../merge' for rev (binary False symlink False)
  merging rev
  my rev@0b76e65c8289+ other rev@bdb19105162a ancestor rev@924404dff337
  launching merge tool: python ../merge *$TESTTMP/t/t/rev* * * (glob)
  merge tool returned: 0
  0 files updated, 2 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  --------------
  M b
  C a
  --------------
  
  $ tm "up a  " "um a b" "      " "20 merge a and b to b, remove a"
  created new head
  --------------
  test L:up a   R:um a b W:       - 20 merge a and b to b, remove a
  --------------
    searching for copies back to rev 1
    unmatched files in other:
     b
    all copies found (* = to merge, ! = divergent, % = renamed and deleted):
     src: 'a' -> dst: 'b' *
    checking for directory renames
  resolving manifests
   branchmerge: True, force: False, partial: False
   ancestor: 924404dff337, local: e300d1c794ec+, remote: 49b6d8032493
   preserving a for resolve of b
   preserving rev for resolve of rev
  removing a
   b: remote moved from a -> m
  picked tool 'python ../merge' for b (binary False symlink False)
  merging a and b to b
  my b@e300d1c794ec+ other b@49b6d8032493 ancestor a@924404dff337
  launching merge tool: python ../merge *$TESTTMP/t/t/b* * * (glob)
  merge tool returned: 0
   rev: versions differ -> m
  picked tool 'python ../merge' for rev (binary False symlink False)
  merging rev
  my rev@e300d1c794ec+ other rev@49b6d8032493 ancestor rev@924404dff337
  launching merge tool: python ../merge *$TESTTMP/t/t/rev* * * (glob)
  merge tool returned: 0
  0 files updated, 2 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  --------------
  M b
    a
  --------------
  
  $ tm "um a b" "up a  " "      " "21 merge a and b to b"
  created new head
  --------------
  test L:um a b R:up a   W:       - 21 merge a and b to b
  --------------
    searching for copies back to rev 1
    unmatched files in local:
     b
    all copies found (* = to merge, ! = divergent, % = renamed and deleted):
     src: 'a' -> dst: 'b' *
    checking for directory renames
  resolving manifests
   branchmerge: True, force: False, partial: False
   ancestor: 924404dff337, local: 62e7bf090eba+, remote: f4db7e329e71
   preserving b for resolve of b
   preserving rev for resolve of rev
   b: local copied/moved from a -> m
  picked tool 'python ../merge' for b (binary False symlink False)
  merging b and a to b
  my b@62e7bf090eba+ other a@f4db7e329e71 ancestor a@924404dff337
  launching merge tool: python ../merge *$TESTTMP/t/t/b* * * (glob)
  merge tool returned: 0
   rev: versions differ -> m
  picked tool 'python ../merge' for rev (binary False symlink False)
  merging rev
  my rev@62e7bf090eba+ other rev@f4db7e329e71 ancestor rev@924404dff337
  launching merge tool: python ../merge *$TESTTMP/t/t/rev* * * (glob)
  merge tool returned: 0
  0 files updated, 2 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  --------------
  M b
    a
  --------------
  

m "nm a b" "um x a" "      " "22 get a, keep b"

  $ tm "nm a b" "up a c" "      " "23 get c, keep b"
  created new head
  --------------
  test L:nm a b R:up a c W:       - 23 get c, keep b
  --------------
    searching for copies back to rev 1
    unmatched files in local:
     b
    unmatched files in other:
     c
    all copies found (* = to merge, ! = divergent, % = renamed and deleted):
     src: 'a' -> dst: 'b' *
    checking for directory renames
  resolving manifests
   branchmerge: True, force: False, partial: False
   ancestor: 924404dff337, local: 02963e448370+, remote: 2b958612230f
   preserving b for resolve of b
   preserving rev for resolve of rev
   c: remote created -> g
  getting c
   b: local copied/moved from a -> m
  picked tool 'python ../merge' for b (binary False symlink False)
  merging b and a to b
  my b@02963e448370+ other a@2b958612230f ancestor a@924404dff337
   premerge successful
   rev: versions differ -> m
  picked tool 'python ../merge' for rev (binary False symlink False)
  merging rev
  my rev@02963e448370+ other rev@2b958612230f ancestor rev@924404dff337
  launching merge tool: python ../merge *$TESTTMP/t/t/rev* * * (glob)
  merge tool returned: 0
  1 files updated, 2 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  --------------
  M b
    a
  M c
  --------------
  

  $ cd ..


Systematic and terse testing of merge merges and ancestor calculation:

Expected result:

\  a  m1  m2  dst
0  -   f   f   f   "versions differ"
1  f   g   g   g   "versions differ"
2  f   f   f   f   "versions differ"
3  f   f   g  f+g  "remote copied to " + f
4  f   f   g   g   "remote moved to " + f
5  f   g   f  f+g  "local copied to " + f2
6  f   g   f   g   "local moved to " + f2
7  -  (f)  f   f   "remote differs from untracked local"
8  f  (f)  f   f   "remote differs from untracked local"

  $ hg init ancestortest
  $ cd ancestortest
  $ for x in 1 2 3 4 5 6 8; do mkdir $x; echo a > $x/f; done
  $ hg ci -Aqm "a"
  $ mkdir 0
  $ touch 0/f
  $ hg mv 1/f 1/g
  $ hg cp 5/f 5/g
  $ hg mv 6/f 6/g
  $ hg rm 8/f
  $ for x in */*; do echo m1 > $x; done
  $ hg ci -Aqm "m1"
  $ hg up -qr0
  $ mkdir 0 7
  $ touch 0/f 7/f
  $ hg mv 1/f 1/g
  $ hg cp 3/f 3/g
  $ hg mv 4/f 4/g
  $ for x in */*; do echo m2 > $x; done
  $ hg ci -Aqm "m2"
  $ hg up -qr1
  $ mkdir 7 8
  $ echo m > 7/f
  $ echo m > 8/f
  $ hg merge -f --tool internal:dump -v --debug -r2 | sed '/^ 0\/f: both created -> m/,$d' 2> /dev/null
    searching for copies back to rev 1
    unmatched files in local:
     5/g
     6/g
    unmatched files in other:
     3/g
     4/g
     7/f
    unmatched files new in both:
     0/f
     1/g
    all copies found (* = to merge, ! = divergent, % = renamed and deleted):
     src: '3/f' -> dst: '3/g' *
     src: '4/f' -> dst: '4/g' *
     src: '5/f' -> dst: '5/g' *
     src: '6/f' -> dst: '6/g' *
    checking for directory renames
  resolving manifests
   branchmerge: True, force: True, partial: False
   ancestor: e6cb3cf11019, local: ec44bf929ab5+, remote: c62e34d0b898
  remote changed 8/f which local deleted
  use (c)hanged version or leave (d)eleted? c
   preserving 0/f for resolve of 0/f
   preserving 1/g for resolve of 1/g
   preserving 2/f for resolve of 2/f
   preserving 3/f for resolve of 3/f
   preserving 3/f for resolve of 3/g
   preserving 4/f for resolve of 4/g
   preserving 5/f for resolve of 5/f
   preserving 5/g for resolve of 5/g
   preserving 6/g for resolve of 6/g
   preserving 7/f for resolve of 7/f
  removing 4/f
   8/f: prompt recreating -> g
  getting 8/f
  $ hg mani
  0/f
  1/g
  2/f
  3/f
  4/f
  5/f
  5/g
  6/g
  $ for f in */*; do echo $f:; cat $f; done
  0/f:
  m1
  0/f.base:
  0/f.local:
  m1
  0/f.orig:
  m1
  0/f.other:
  m2
  1/g:
  m1
  1/g.base:
  a
  1/g.local:
  m1
  1/g.orig:
  m1
  1/g.other:
  m2
  2/f:
  m1
  2/f.base:
  a
  2/f.local:
  m1
  2/f.orig:
  m1
  2/f.other:
  m2
  3/f:
  m1
  3/f.base:
  a
  3/f.local:
  m1
  3/f.orig:
  m1
  3/f.other:
  m2
  3/g:
  m1
  3/g.base:
  a
  3/g.local:
  m1
  3/g.orig:
  m1
  3/g.other:
  m2
  4/g:
  m1
  4/g.base:
  a
  4/g.local:
  m1
  4/g.orig:
  m1
  4/g.other:
  m2
  5/f:
  m1
  5/f.base:
  a
  5/f.local:
  m1
  5/f.orig:
  m1
  5/f.other:
  m2
  5/g:
  m1
  5/g.base:
  a
  5/g.local:
  m1
  5/g.orig:
  m1
  5/g.other:
  m2
  6/g:
  m1
  6/g.base:
  a
  6/g.local:
  m1
  6/g.orig:
  m1
  6/g.other:
  m2
  7/f:
  m
  7/f.base:
  7/f.local:
  m
  7/f.orig:
  m
  7/f.other:
  m2
  8/f:
  m2
  $ cd ..