view tests/test-revert.t @ 25757:4d1382fd96ff

context: write dirstate out explicitly at the end of markcommitted

To detect change of a file without redundant comparison of file
content, dirstate recognizes a file as certainly clean, if:

  (1) it is already known as "normal",
  (2) dirstate entry for it has valid (= not "-1") timestamp, and
  (3) mode, size and timestamp of it on the filesystem are as same as
      ones expected in dirstate

This works as expected in many cases, but doesn't in the corner case
that changing a file keeps mode, size and timestamp of it on the
filesystem.

The timetable below shows steps in one of typical such situations:

  ---- ----------------------------------- ----------------
                                           timestamp of "f"
                                           ----------------
                                           dirstate   file-
  time          action                     mem  file  system
  ---- ----------------------------------- ---- ----- -----
   *                                             ***    ***
       - 'hg transplant REV1 REV2 ...'
         - transplanting REV1
           ....
   N
           - change "f", but keep size                   N
             (via 'patch.patch()')
           - 'dirstate.normal("f")'          N   ***
             (via 'repo.commit()')

         - transplanting REV2
           - change "f", but keep size                   N
             (via 'patch.patch()')
           - aborted while patching
  N+1
         - release wlock
           - 'dirstate.write()'              N    N      N

       - 'hg status' shows "r1" as "clean"   N    N      N
  ---- ----------------------------------- ---- ----- -----

The most important point is that 'dirstate.write()' is executed at N+1
or later. This causes writing dirstate timestamp N of "f" out
successfully. If it is executed at N, 'parsers.pack_dirstate()'
replaces timestamp N with "-1" before actual writing dirstate out.

This issue can occur when 'hg transplant' satisfies conditions below:

  - multiple revisions to be transplanted change the same file
  - those revisions don't change mode and size of the file, and
  - the 2nd or later revision of them fails after changing the file

The root cause of this issue is that files are changed without
flushing in-memory dirstate changes via 'repo.commit()' (even though
omitting 'dirstate.normallookup()' on files changed by 'patch.patch()'
for efficiency also causes this issue).

To detect changes of files correctly, this patch writes in-memory
dirstate changes out explicitly after marking files as clean in
'committablectx.markcommitted()', which is invoked via
'repo.commit()'.

After this change, timetable is changed as below:

  ---- ----------------------------------- ----------------
                                           timestamp of "f"
                                           ----------------
                                           dirstate   file-
  time          action                     mem  file  system
  ---- ----------------------------------- ---- ----- -----
   *                                             ***    ***
       - 'hg transplant REV1 REV2 ...'
         - transplanting REV1
           ....
   N
           - change "f", but keep size                   N
             (via 'patch.patch()')
           - 'dirstate.normal("f")'          N    ***
             (via 'repo.commit()')
       ----------------------------------- ---- ----- -----
           - 'dirsttate.write()'            -1    -1
       ----------------------------------- ---- ----- -----
         - transplanting REV2
           - change "f", but keep size                   N
             (via 'patch.patch()')
           - aborted while patching
  N+1
         - release wlock
           - 'dirstate.write()'              -1   -1     N

       - 'hg status' shows "r1" as "clean"   -1   -1     N
  ---- ----------------------------------- ---- ----- -----

To reproduce this issue in tests certainly, this patch emulates some
timing critical actions as below:

  - change "f" at N

    'patch.patch()' with 'fakepatchtime.py' explicitly changes mtime
    of patched files to "2000-01-01 00:00" (= N).

  - 'dirstate.write()' via 'repo.commit()' at N

    'fakedirstatewritetime.py' forces 'pack_dirstate()' to use
    "2000-01-01 00:00" as "now", only if 'pack_dirstate()' is invoked
    via 'committablectx.markcommitted()'.

  - 'dirstate.write()' via releasing wlock at N+1 (or "not at N")

    'pack_dirstate()' via releasing wlock uses actual timestamp at
    runtime as "now", and it should be different from the "2000-01-01
    00:00" of "f".

BTW, this patch doesn't test cases below, even though 'patch.patch()'
is used similarly in these cases:

  1. failure of 'hg import' or 'hg qpush'

  2. success of 'hg import', 'hg qpush' or 'hg transplant'

Case (1) above doesn't cause this kind of issue, because:

  - if patching is aborted by conflicts, changed files are committed

    changed files are marked as CLEAN, even though they are partially
    patched.

  - otherwise, dirstate are fully restored by 'dirstateguard'

    For example in timetable above, timestamp of "f" in .hg/dirstate
    is restored to -1 (or less than N), and subsequent 'hg status' can
    detect changes correctly.

Case (2) always causes 'repo.status()' invocation via 'repo.commit()'
just after changing files inside same wlock scope.

  ---- ----------------------------------- ----------------
                                           timestamp of "f"
                                           ----------------
                                           dirstate   file-
  time          action                     mem  file  system
  ---- ----------------------------------- ---- ----- -----
  N                                              ***   ***
       - make file "f" clean                            N

       - execute 'hg foobar'
         ....
         - 'dirstate.normal("f")'           N    ***
           (e.g. via dirty check
            or previous 'repo.commit()')

         - change "f", but keep size                    N
         - 'repo.status()' (*1)
           (via 'repo.commit()')
  ---- ----------------------------------- ---- ----- -----

At a glance, 'repo.status()' at (*1) seems to cause similar issue (=
"changed files are treated as clean"), but actually doesn't.

'dirstate._lastnormaltime' should be N at (*1) above, because
'dirstate.normal()' via dirty check is finished at N.

Therefore, "f" changed at N (= 'dirstate._lastnormaltime') is forcibly
treated as "unsure" at (*1), and changes are detected as expected (see
'dirstate.status()' for detail).

If 'hg import' is executed with '--no-commit', 'repo.status()' isn't
invoked just after changing files inside same wlock scope.

But preceding 'dirstate.normal()' is invoked inside another wlock
scope via 'cmdutil.bailifchanged()', and in-memory changes should be
flushed at the end of that scope.

Therefore, timestamp N of clean "f" should be replaced by -1, if
'dirstate.write()' is invoked at N. It means that condition of this
issue isn't satisfied.

  $ hg init repo
  $ cd repo
  $ echo 123 > a
  $ echo 123 > c
  $ echo 123 > e
  $ hg add a c e
  $ hg commit -m "first" a c e

nothing changed

  $ hg revert
  abort: no files or directories specified
  (use --all to revert all files)
  [255]
  $ hg revert --all

Introduce some changes and revert them
--------------------------------------

  $ echo 123 > b

  $ hg status
  ? b
  $ echo 12 > c

  $ hg status
  M c
  ? b
  $ hg add b

  $ hg status
  M c
  A b
  $ hg rm a

  $ hg status
  M c
  A b
  R a

revert removal of a file

  $ hg revert a
  $ hg status
  M c
  A b

revert addition of a file

  $ hg revert b
  $ hg status
  M c
  ? b

revert modification of a file (--no-backup)

  $ hg revert --no-backup c
  $ hg status
  ? b

revert deletion (! status) of a added file
------------------------------------------

  $ hg add b

  $ hg status b
  A b
  $ rm b
  $ hg status b
  ! b
  $ hg revert -v b
  forgetting b
  $ hg status b
  b: * (glob)

  $ ls
  a
  c
  e

Test creation of backup (.orig) files
-------------------------------------

  $ echo z > e
  $ hg revert --all -v
  saving current version of e as e.orig
  reverting e

revert on clean file (no change)
--------------------------------

  $ hg revert a
  no changes needed to a

revert on an untracked file
---------------------------

  $ echo q > q
  $ hg revert q
  file not managed: q
  $ rm q

revert on file that does not exists
-----------------------------------

  $ hg revert notfound
  notfound: no such file in rev 334a9e57682c
  $ touch d
  $ hg add d
  $ hg rm a
  $ hg commit -m "second"
  $ echo z > z
  $ hg add z
  $ hg st
  A z
  ? e.orig

revert to another revision (--rev)
----------------------------------

  $ hg revert --all -r0
  adding a
  removing d
  forgetting z

revert explicitly to parent (--rev)
-----------------------------------

  $ hg revert --all -rtip
  forgetting a
  undeleting d
  $ rm a *.orig

revert to another revision (--rev) and exact match
--------------------------------------------------

exact match are more silent

  $ hg revert -r0 a
  $ hg st a
  A a
  $ hg rm d
  $ hg st d
  R d

should keep d removed

  $ hg revert -r0 d
  no changes needed to d
  $ hg st d
  R d

  $ hg update -C
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

revert of exec bit
------------------

#if execbit
  $ chmod +x c
  $ hg revert --all
  reverting c

  $ test -x c || echo non-executable
  non-executable

  $ chmod +x c
  $ hg commit -m exe

  $ chmod -x c
  $ hg revert --all
  reverting c

  $ test -x c && echo executable
  executable
#endif

Test that files reverted to other than the parent are treated as
"modified", even if none of mode, size and timestamp of it isn't
changed on the filesystem (see also issue4583).

  $ echo 321 > e
  $ hg diff --git
  diff --git a/e b/e
  --- a/e
  +++ b/e
  @@ -1,1 +1,1 @@
  -123
  +321
  $ hg commit -m 'ambiguity from size'

  $ cat e
  321
  $ touch -t 200001010000 e
  $ hg debugrebuildstate

  $ cat >> .hg/hgrc <<EOF
  > [fakedirstatewritetime]
  > # emulate invoking dirstate.write() via repo.status()
  > # at 2000-01-01 00:00
  > fakenow = 200001010000
  > 
  > [extensions]
  > fakedirstatewritetime = $TESTDIR/fakedirstatewritetime.py
  > EOF
  $ hg revert -r 0 e
  $ cat >> .hg/hgrc <<EOF
  > [extensions]
  > fakedirstatewritetime = !
  > EOF

  $ cat e
  123
  $ touch -t 200001010000 e
  $ hg status -A e
  M e

  $ cd ..


Issue241: update and revert produces inconsistent repositories
--------------------------------------------------------------

  $ hg init a
  $ cd a
  $ echo a >> a
  $ hg commit -A -d '1 0' -m a
  adding a
  $ echo a >> a
  $ hg commit -d '2 0' -m a
  $ hg update 0
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ mkdir b
  $ echo b > b/b

call `hg revert` with no file specified
---------------------------------------

  $ hg revert -rtip
  abort: no files or directories specified
  (use --all to revert all files, or 'hg update 1' to update)
  [255]

call `hg revert` with -I
---------------------------

  $ echo a >> a
  $ hg revert -I a
  reverting a

call `hg revert` with -X
---------------------------

  $ echo a >> a
  $ hg revert -X d
  reverting a

call `hg revert` with --all
---------------------------

  $ hg revert --all -rtip
  reverting a
  $ rm *.orig

Issue332: confusing message when reverting directory
----------------------------------------------------

  $ hg ci -A -m b
  adding b/b
  created new head
  $ echo foobar > b/b
  $ mkdir newdir
  $ echo foo > newdir/newfile
  $ hg add newdir/newfile
  $ hg revert b newdir
  reverting b/b (glob)
  forgetting newdir/newfile (glob)
  $ echo foobar > b/b
  $ hg revert .
  reverting b/b (glob)


reverting a rename target should revert the source
--------------------------------------------------

  $ hg mv a newa
  $ hg revert newa
  $ hg st a newa
  ? newa

Also true for move overwriting an existing file

  $ hg mv --force a b/b
  $ hg revert b/b
  $ hg status a b/b

  $ cd ..

  $ hg init ignored
  $ cd ignored
  $ echo '^ignored$' > .hgignore
  $ echo '^ignoreddir$' >> .hgignore
  $ echo '^removed$' >> .hgignore

  $ mkdir ignoreddir
  $ touch ignoreddir/file
  $ touch ignoreddir/removed
  $ touch ignored
  $ touch removed

4 ignored files (we will add/commit everything)

  $ hg st -A -X .hgignore
  I ignored
  I ignoreddir/file
  I ignoreddir/removed
  I removed
  $ hg ci -qAm 'add files' ignored ignoreddir/file ignoreddir/removed removed

  $ echo >> ignored
  $ echo >> ignoreddir/file
  $ hg rm removed ignoreddir/removed

should revert ignored* and undelete *removed
--------------------------------------------

  $ hg revert -a --no-backup
  reverting ignored
  reverting ignoreddir/file (glob)
  undeleting ignoreddir/removed (glob)
  undeleting removed
  $ hg st -mardi

  $ hg up -qC
  $ echo >> ignored
  $ hg rm removed

should silently revert the named files
--------------------------------------

  $ hg revert --no-backup ignored removed
  $ hg st -mardi

Reverting copy (issue3920)
--------------------------

someone set up us the copies

  $ rm .hgignore
  $ hg update -C
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg mv ignored allyour
  $ hg copy removed base
  $ hg commit -m rename

copies and renames, you have no chance to survive make your time (issue3920)

  $ hg update '.^'
  1 files updated, 0 files merged, 2 files removed, 0 files unresolved
  $ hg revert -rtip -a
  adding allyour
  adding base
  removing ignored
  $ hg status -C
  A allyour
    ignored
  A base
    removed
  R ignored

Test revert of a file added by one side of the merge
====================================================

remove any pending change

  $ hg revert --all
  forgetting allyour
  forgetting base
  undeleting ignored
  $ hg purge --all --config extensions.purge=

Adds a new commit

  $ echo foo > newadd
  $ hg add newadd
  $ hg commit -m 'other adds'
  created new head


merge it with the other head

  $ hg merge # merge 1 into 2
  2 files updated, 0 files merged, 1 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg summary
  parent: 2:b8ec310b2d4e tip
   other adds
  parent: 1:f6180deb8fbe 
   rename
  branch: default
  commit: 2 modified, 1 removed (merge)
  update: (current)
  phases: 3 draft

clarifies who added what

  $ hg status
  M allyour
  M base
  R ignored
  $ hg status --change 'p1()'
  A newadd
  $ hg status --change 'p2()'
  A allyour
  A base
  R ignored

revert file added by p1() to p1() state
-----------------------------------------

  $ hg revert -r 'p1()' 'glob:newad?'
  $ hg status
  M allyour
  M base
  R ignored

revert file added by p1() to p2() state
------------------------------------------

  $ hg revert -r 'p2()' 'glob:newad?'
  removing newadd
  $ hg status
  M allyour
  M base
  R ignored
  R newadd

revert file added by p2() to p2() state
------------------------------------------

  $ hg revert -r 'p2()' 'glob:allyou?'
  $ hg status
  M allyour
  M base
  R ignored
  R newadd

revert file added by p2() to p1() state
------------------------------------------

  $ hg revert -r 'p1()' 'glob:allyou?'
  removing allyour
  $ hg status
  M base
  R allyour
  R ignored
  R newadd

Systematic behavior validation of most possible cases
=====================================================

This section tests most of the possible combinations of revision states and
working directory states. The number of possible cases is significant but they
but they all have a slightly different handling. So this section commits to
and testing all of them to allow safe refactoring of the revert code.

A python script is used to generate a file history for each combination of
states, on one side the content (or lack thereof) in two revisions, and
on the other side, the content and "tracked-ness" of the working directory. The
three states generated are:

- a "base" revision
- a "parent" revision
- the working directory (based on "parent")

The files generated have names of the form:

 <rev1-content>_<rev2-content>_<working-copy-content>-<tracked-ness>

All known states are not tested yet. See inline documentation for details.
Special cases from merge and rename are not tested by this section.

Write the python script to disk
-------------------------------

check list of planned files

  $ python $TESTDIR/generate-working-copy-states.py filelist 2
  content1_content1_content1-tracked
  content1_content1_content1-untracked
  content1_content1_content3-tracked
  content1_content1_content3-untracked
  content1_content1_missing-tracked
  content1_content1_missing-untracked
  content1_content2_content1-tracked
  content1_content2_content1-untracked
  content1_content2_content2-tracked
  content1_content2_content2-untracked
  content1_content2_content3-tracked
  content1_content2_content3-untracked
  content1_content2_missing-tracked
  content1_content2_missing-untracked
  content1_missing_content1-tracked
  content1_missing_content1-untracked
  content1_missing_content3-tracked
  content1_missing_content3-untracked
  content1_missing_missing-tracked
  content1_missing_missing-untracked
  missing_content2_content2-tracked
  missing_content2_content2-untracked
  missing_content2_content3-tracked
  missing_content2_content3-untracked
  missing_content2_missing-tracked
  missing_content2_missing-untracked
  missing_missing_content3-tracked
  missing_missing_content3-untracked
  missing_missing_missing-tracked
  missing_missing_missing-untracked

Script to make a simple text version of the content
---------------------------------------------------

  $ cat << EOF >> dircontent.py
  > # generate a simple text view of the directory for easy comparison
  > import os
  > files = os.listdir('.')
  > files.sort()
  > for filename in files:
  >     if os.path.isdir(filename):
  >         continue
  >     content = open(filename).read()
  >     print '%-6s %s' % (content.strip(), filename)
  > EOF

Generate appropriate repo state
-------------------------------

  $ hg init revert-ref
  $ cd revert-ref

Generate base changeset

  $ python $TESTDIR/generate-working-copy-states.py state 2 1
  $ hg addremove --similarity 0
  adding content1_content1_content1-tracked
  adding content1_content1_content1-untracked
  adding content1_content1_content3-tracked
  adding content1_content1_content3-untracked
  adding content1_content1_missing-tracked
  adding content1_content1_missing-untracked
  adding content1_content2_content1-tracked
  adding content1_content2_content1-untracked
  adding content1_content2_content2-tracked
  adding content1_content2_content2-untracked
  adding content1_content2_content3-tracked
  adding content1_content2_content3-untracked
  adding content1_content2_missing-tracked
  adding content1_content2_missing-untracked
  adding content1_missing_content1-tracked
  adding content1_missing_content1-untracked
  adding content1_missing_content3-tracked
  adding content1_missing_content3-untracked
  adding content1_missing_missing-tracked
  adding content1_missing_missing-untracked
  $ hg status
  A content1_content1_content1-tracked
  A content1_content1_content1-untracked
  A content1_content1_content3-tracked
  A content1_content1_content3-untracked
  A content1_content1_missing-tracked
  A content1_content1_missing-untracked
  A content1_content2_content1-tracked
  A content1_content2_content1-untracked
  A content1_content2_content2-tracked
  A content1_content2_content2-untracked
  A content1_content2_content3-tracked
  A content1_content2_content3-untracked
  A content1_content2_missing-tracked
  A content1_content2_missing-untracked
  A content1_missing_content1-tracked
  A content1_missing_content1-untracked
  A content1_missing_content3-tracked
  A content1_missing_content3-untracked
  A content1_missing_missing-tracked
  A content1_missing_missing-untracked
  $ hg commit -m 'base'

(create a simple text version of the content)

  $ python ../dircontent.py > ../content-base.txt
  $ cat ../content-base.txt
  content1 content1_content1_content1-tracked
  content1 content1_content1_content1-untracked
  content1 content1_content1_content3-tracked
  content1 content1_content1_content3-untracked
  content1 content1_content1_missing-tracked
  content1 content1_content1_missing-untracked
  content1 content1_content2_content1-tracked
  content1 content1_content2_content1-untracked
  content1 content1_content2_content2-tracked
  content1 content1_content2_content2-untracked
  content1 content1_content2_content3-tracked
  content1 content1_content2_content3-untracked
  content1 content1_content2_missing-tracked
  content1 content1_content2_missing-untracked
  content1 content1_missing_content1-tracked
  content1 content1_missing_content1-untracked
  content1 content1_missing_content3-tracked
  content1 content1_missing_content3-untracked
  content1 content1_missing_missing-tracked
  content1 content1_missing_missing-untracked

Create parent changeset

  $ python $TESTDIR/generate-working-copy-states.py state 2 2
  $ hg addremove --similarity 0
  removing content1_missing_content1-tracked
  removing content1_missing_content1-untracked
  removing content1_missing_content3-tracked
  removing content1_missing_content3-untracked
  removing content1_missing_missing-tracked
  removing content1_missing_missing-untracked
  adding missing_content2_content2-tracked
  adding missing_content2_content2-untracked
  adding missing_content2_content3-tracked
  adding missing_content2_content3-untracked
  adding missing_content2_missing-tracked
  adding missing_content2_missing-untracked
  $ hg status
  M content1_content2_content1-tracked
  M content1_content2_content1-untracked
  M content1_content2_content2-tracked
  M content1_content2_content2-untracked
  M content1_content2_content3-tracked
  M content1_content2_content3-untracked
  M content1_content2_missing-tracked
  M content1_content2_missing-untracked
  A missing_content2_content2-tracked
  A missing_content2_content2-untracked
  A missing_content2_content3-tracked
  A missing_content2_content3-untracked
  A missing_content2_missing-tracked
  A missing_content2_missing-untracked
  R content1_missing_content1-tracked
  R content1_missing_content1-untracked
  R content1_missing_content3-tracked
  R content1_missing_content3-untracked
  R content1_missing_missing-tracked
  R content1_missing_missing-untracked
  $ hg commit -m 'parent'

(create a simple text version of the content)

  $ python ../dircontent.py > ../content-parent.txt
  $ cat ../content-parent.txt
  content1 content1_content1_content1-tracked
  content1 content1_content1_content1-untracked
  content1 content1_content1_content3-tracked
  content1 content1_content1_content3-untracked
  content1 content1_content1_missing-tracked
  content1 content1_content1_missing-untracked
  content2 content1_content2_content1-tracked
  content2 content1_content2_content1-untracked
  content2 content1_content2_content2-tracked
  content2 content1_content2_content2-untracked
  content2 content1_content2_content3-tracked
  content2 content1_content2_content3-untracked
  content2 content1_content2_missing-tracked
  content2 content1_content2_missing-untracked
  content2 missing_content2_content2-tracked
  content2 missing_content2_content2-untracked
  content2 missing_content2_content3-tracked
  content2 missing_content2_content3-untracked
  content2 missing_content2_missing-tracked
  content2 missing_content2_missing-untracked

Setup working directory

  $ python $TESTDIR/generate-working-copy-states.py state 2 wc
  $ hg addremove --similarity 0
  adding content1_missing_content1-tracked
  adding content1_missing_content1-untracked
  adding content1_missing_content3-tracked
  adding content1_missing_content3-untracked
  adding content1_missing_missing-tracked
  adding content1_missing_missing-untracked
  adding missing_missing_content3-tracked
  adding missing_missing_content3-untracked
  adding missing_missing_missing-tracked
  adding missing_missing_missing-untracked
  $ hg forget *_*_*-untracked
  $ rm *_*_missing-*
  $ hg status
  M content1_content1_content3-tracked
  M content1_content2_content1-tracked
  M content1_content2_content3-tracked
  M missing_content2_content3-tracked
  A content1_missing_content1-tracked
  A content1_missing_content3-tracked
  A missing_missing_content3-tracked
  R content1_content1_content1-untracked
  R content1_content1_content3-untracked
  R content1_content1_missing-untracked
  R content1_content2_content1-untracked
  R content1_content2_content2-untracked
  R content1_content2_content3-untracked
  R content1_content2_missing-untracked
  R missing_content2_content2-untracked
  R missing_content2_content3-untracked
  R missing_content2_missing-untracked
  ! content1_content1_missing-tracked
  ! content1_content2_missing-tracked
  ! content1_missing_missing-tracked
  ! missing_content2_missing-tracked
  ! missing_missing_missing-tracked
  ? content1_missing_content1-untracked
  ? content1_missing_content3-untracked
  ? missing_missing_content3-untracked

  $ hg status --rev 'desc("base")'
  M content1_content1_content3-tracked
  M content1_content2_content2-tracked
  M content1_content2_content3-tracked
  M content1_missing_content3-tracked
  A missing_content2_content2-tracked
  A missing_content2_content3-tracked
  A missing_missing_content3-tracked
  R content1_content1_content1-untracked
  R content1_content1_content3-untracked
  R content1_content1_missing-untracked
  R content1_content2_content1-untracked
  R content1_content2_content2-untracked
  R content1_content2_content3-untracked
  R content1_content2_missing-untracked
  R content1_missing_content1-untracked
  R content1_missing_content3-untracked
  R content1_missing_missing-untracked
  ! content1_content1_missing-tracked
  ! content1_content2_missing-tracked
  ! content1_missing_missing-tracked
  ! missing_content2_missing-tracked
  ! missing_missing_missing-tracked
  ? missing_missing_content3-untracked

(create a simple text version of the content)

  $ python ../dircontent.py > ../content-wc.txt
  $ cat ../content-wc.txt
  content1 content1_content1_content1-tracked
  content1 content1_content1_content1-untracked
  content3 content1_content1_content3-tracked
  content3 content1_content1_content3-untracked
  content1 content1_content2_content1-tracked
  content1 content1_content2_content1-untracked
  content2 content1_content2_content2-tracked
  content2 content1_content2_content2-untracked
  content3 content1_content2_content3-tracked
  content3 content1_content2_content3-untracked
  content1 content1_missing_content1-tracked
  content1 content1_missing_content1-untracked
  content3 content1_missing_content3-tracked
  content3 content1_missing_content3-untracked
  content2 missing_content2_content2-tracked
  content2 missing_content2_content2-untracked
  content3 missing_content2_content3-tracked
  content3 missing_content2_content3-untracked
  content3 missing_missing_content3-tracked
  content3 missing_missing_content3-untracked

  $ cd ..

Test revert --all to parent content
-----------------------------------

(setup from reference repo)

  $ cp -r revert-ref revert-parent-all
  $ cd revert-parent-all

check revert output

  $ hg revert --all
  undeleting content1_content1_content1-untracked
  reverting content1_content1_content3-tracked
  undeleting content1_content1_content3-untracked
  reverting content1_content1_missing-tracked
  undeleting content1_content1_missing-untracked
  reverting content1_content2_content1-tracked
  undeleting content1_content2_content1-untracked
  undeleting content1_content2_content2-untracked
  reverting content1_content2_content3-tracked
  undeleting content1_content2_content3-untracked
  reverting content1_content2_missing-tracked
  undeleting content1_content2_missing-untracked
  forgetting content1_missing_content1-tracked
  forgetting content1_missing_content3-tracked
  forgetting content1_missing_missing-tracked
  undeleting missing_content2_content2-untracked
  reverting missing_content2_content3-tracked
  undeleting missing_content2_content3-untracked
  reverting missing_content2_missing-tracked
  undeleting missing_content2_missing-untracked
  forgetting missing_missing_content3-tracked
  forgetting missing_missing_missing-tracked

Compare resulting directory with revert target.

The diff is filtered to include change only. The only difference should be
additional `.orig` backup file when applicable.

  $ python ../dircontent.py > ../content-parent-all.txt
  $ cd ..
  $ diff -U 0 -- content-parent.txt content-parent-all.txt | grep _
  +content3 content1_content1_content3-tracked.orig
  +content3 content1_content1_content3-untracked.orig
  +content1 content1_content2_content1-tracked.orig
  +content1 content1_content2_content1-untracked.orig
  +content3 content1_content2_content3-tracked.orig
  +content3 content1_content2_content3-untracked.orig
  +content1 content1_missing_content1-tracked
  +content1 content1_missing_content1-untracked
  +content3 content1_missing_content3-tracked
  +content3 content1_missing_content3-untracked
  +content3 missing_content2_content3-tracked.orig
  +content3 missing_content2_content3-untracked.orig
  +content3 missing_missing_content3-tracked
  +content3 missing_missing_content3-untracked

Test revert --all to "base" content
-----------------------------------

(setup from reference repo)

  $ cp -r revert-ref revert-base-all
  $ cd revert-base-all

check revert output

  $ hg revert --all --rev 'desc(base)'
  undeleting content1_content1_content1-untracked
  reverting content1_content1_content3-tracked
  undeleting content1_content1_content3-untracked
  reverting content1_content1_missing-tracked
  undeleting content1_content1_missing-untracked
  undeleting content1_content2_content1-untracked
  reverting content1_content2_content2-tracked
  undeleting content1_content2_content2-untracked
  reverting content1_content2_content3-tracked
  undeleting content1_content2_content3-untracked
  reverting content1_content2_missing-tracked
  undeleting content1_content2_missing-untracked
  adding content1_missing_content1-untracked
  reverting content1_missing_content3-tracked
  adding content1_missing_content3-untracked
  reverting content1_missing_missing-tracked
  adding content1_missing_missing-untracked
  removing missing_content2_content2-tracked
  removing missing_content2_content3-tracked
  removing missing_content2_missing-tracked
  forgetting missing_missing_content3-tracked
  forgetting missing_missing_missing-tracked

Compare resulting directory with revert target.

The diff is filtered to include change only. The only difference should be
additional `.orig` backup file when applicable.

  $ python ../dircontent.py > ../content-base-all.txt
  $ cd ..
  $ diff -U 0 -- content-base.txt content-base-all.txt | grep _
  +content3 content1_content1_content3-tracked.orig
  +content3 content1_content1_content3-untracked.orig
  +content2 content1_content2_content2-untracked.orig
  +content3 content1_content2_content3-tracked.orig
  +content3 content1_content2_content3-untracked.orig
  +content3 content1_missing_content3-tracked.orig
  +content3 content1_missing_content3-untracked.orig
  +content2 missing_content2_content2-untracked
  +content3 missing_content2_content3-tracked.orig
  +content3 missing_content2_content3-untracked
  +content3 missing_missing_content3-tracked
  +content3 missing_missing_content3-untracked

Test revert to parent content with explicit file name
-----------------------------------------------------

(setup from reference repo)

  $ cp -r revert-ref revert-parent-explicit
  $ cd revert-parent-explicit

revert all files individually and check the output
(output is expected to be different than in the --all case)

  $ for file in `python $TESTDIR/generate-working-copy-states.py filelist 2`; do
  >   echo '### revert for:' $file;
  >   hg revert $file;
  >   echo
  > done
  ### revert for: content1_content1_content1-tracked
  no changes needed to content1_content1_content1-tracked
  
  ### revert for: content1_content1_content1-untracked
  
  ### revert for: content1_content1_content3-tracked
  
  ### revert for: content1_content1_content3-untracked
  
  ### revert for: content1_content1_missing-tracked
  
  ### revert for: content1_content1_missing-untracked
  
  ### revert for: content1_content2_content1-tracked
  
  ### revert for: content1_content2_content1-untracked
  
  ### revert for: content1_content2_content2-tracked
  no changes needed to content1_content2_content2-tracked
  
  ### revert for: content1_content2_content2-untracked
  
  ### revert for: content1_content2_content3-tracked
  
  ### revert for: content1_content2_content3-untracked
  
  ### revert for: content1_content2_missing-tracked
  
  ### revert for: content1_content2_missing-untracked
  
  ### revert for: content1_missing_content1-tracked
  
  ### revert for: content1_missing_content1-untracked
  file not managed: content1_missing_content1-untracked
  
  ### revert for: content1_missing_content3-tracked
  
  ### revert for: content1_missing_content3-untracked
  file not managed: content1_missing_content3-untracked
  
  ### revert for: content1_missing_missing-tracked
  
  ### revert for: content1_missing_missing-untracked
  content1_missing_missing-untracked: no such file in rev * (glob)
  
  ### revert for: missing_content2_content2-tracked
  no changes needed to missing_content2_content2-tracked
  
  ### revert for: missing_content2_content2-untracked
  
  ### revert for: missing_content2_content3-tracked
  
  ### revert for: missing_content2_content3-untracked
  
  ### revert for: missing_content2_missing-tracked
  
  ### revert for: missing_content2_missing-untracked
  
  ### revert for: missing_missing_content3-tracked
  
  ### revert for: missing_missing_content3-untracked
  file not managed: missing_missing_content3-untracked
  
  ### revert for: missing_missing_missing-tracked
  
  ### revert for: missing_missing_missing-untracked
  missing_missing_missing-untracked: no such file in rev * (glob)
  

check resulting directory against the --all run
(There should be no difference)

  $ python ../dircontent.py > ../content-parent-explicit.txt
  $ cd ..
  $ diff -U 0 -- content-parent-all.txt content-parent-explicit.txt | grep _
  [1]

Test revert to "base" content with explicit file name
-----------------------------------------------------

(setup from reference repo)

  $ cp -r revert-ref revert-base-explicit
  $ cd revert-base-explicit

revert all files individually and check the output
(output is expected to be different than in the --all case)

  $ for file in `python $TESTDIR/generate-working-copy-states.py filelist 2`; do
  >   echo '### revert for:' $file;
  >   hg revert $file --rev 'desc(base)';
  >   echo
  > done
  ### revert for: content1_content1_content1-tracked
  no changes needed to content1_content1_content1-tracked
  
  ### revert for: content1_content1_content1-untracked
  
  ### revert for: content1_content1_content3-tracked
  
  ### revert for: content1_content1_content3-untracked
  
  ### revert for: content1_content1_missing-tracked
  
  ### revert for: content1_content1_missing-untracked
  
  ### revert for: content1_content2_content1-tracked
  no changes needed to content1_content2_content1-tracked
  
  ### revert for: content1_content2_content1-untracked
  
  ### revert for: content1_content2_content2-tracked
  
  ### revert for: content1_content2_content2-untracked
  
  ### revert for: content1_content2_content3-tracked
  
  ### revert for: content1_content2_content3-untracked
  
  ### revert for: content1_content2_missing-tracked
  
  ### revert for: content1_content2_missing-untracked
  
  ### revert for: content1_missing_content1-tracked
  no changes needed to content1_missing_content1-tracked
  
  ### revert for: content1_missing_content1-untracked
  
  ### revert for: content1_missing_content3-tracked
  
  ### revert for: content1_missing_content3-untracked
  
  ### revert for: content1_missing_missing-tracked
  
  ### revert for: content1_missing_missing-untracked
  
  ### revert for: missing_content2_content2-tracked
  
  ### revert for: missing_content2_content2-untracked
  no changes needed to missing_content2_content2-untracked
  
  ### revert for: missing_content2_content3-tracked
  
  ### revert for: missing_content2_content3-untracked
  no changes needed to missing_content2_content3-untracked
  
  ### revert for: missing_content2_missing-tracked
  
  ### revert for: missing_content2_missing-untracked
  no changes needed to missing_content2_missing-untracked
  
  ### revert for: missing_missing_content3-tracked
  
  ### revert for: missing_missing_content3-untracked
  file not managed: missing_missing_content3-untracked
  
  ### revert for: missing_missing_missing-tracked
  
  ### revert for: missing_missing_missing-untracked
  missing_missing_missing-untracked: no such file in rev * (glob)
  

check resulting directory against the --all run
(There should be no difference)

  $ python ../dircontent.py > ../content-base-explicit.txt
  $ cd ..
  $ diff -U 0 -- content-base-all.txt content-base-explicit.txt | grep _
  [1]