Mercurial > hg
view tests/test-win32text.t @ 25757:4d1382fd96ff
context: write dirstate out explicitly at the end of markcommitted
To detect change of a file without redundant comparison of file
content, dirstate recognizes a file as certainly clean, if:
(1) it is already known as "normal",
(2) dirstate entry for it has valid (= not "-1") timestamp, and
(3) mode, size and timestamp of it on the filesystem are as same as
ones expected in dirstate
This works as expected in many cases, but doesn't in the corner case
that changing a file keeps mode, size and timestamp of it on the
filesystem.
The timetable below shows steps in one of typical such situations:
---- ----------------------------------- ----------------
timestamp of "f"
----------------
dirstate file-
time action mem file system
---- ----------------------------------- ---- ----- -----
* *** ***
- 'hg transplant REV1 REV2 ...'
- transplanting REV1
....
N
- change "f", but keep size N
(via 'patch.patch()')
- 'dirstate.normal("f")' N ***
(via 'repo.commit()')
- transplanting REV2
- change "f", but keep size N
(via 'patch.patch()')
- aborted while patching
N+1
- release wlock
- 'dirstate.write()' N N N
- 'hg status' shows "r1" as "clean" N N N
---- ----------------------------------- ---- ----- -----
The most important point is that 'dirstate.write()' is executed at N+1
or later. This causes writing dirstate timestamp N of "f" out
successfully. If it is executed at N, 'parsers.pack_dirstate()'
replaces timestamp N with "-1" before actual writing dirstate out.
This issue can occur when 'hg transplant' satisfies conditions below:
- multiple revisions to be transplanted change the same file
- those revisions don't change mode and size of the file, and
- the 2nd or later revision of them fails after changing the file
The root cause of this issue is that files are changed without
flushing in-memory dirstate changes via 'repo.commit()' (even though
omitting 'dirstate.normallookup()' on files changed by 'patch.patch()'
for efficiency also causes this issue).
To detect changes of files correctly, this patch writes in-memory
dirstate changes out explicitly after marking files as clean in
'committablectx.markcommitted()', which is invoked via
'repo.commit()'.
After this change, timetable is changed as below:
---- ----------------------------------- ----------------
timestamp of "f"
----------------
dirstate file-
time action mem file system
---- ----------------------------------- ---- ----- -----
* *** ***
- 'hg transplant REV1 REV2 ...'
- transplanting REV1
....
N
- change "f", but keep size N
(via 'patch.patch()')
- 'dirstate.normal("f")' N ***
(via 'repo.commit()')
----------------------------------- ---- ----- -----
- 'dirsttate.write()' -1 -1
----------------------------------- ---- ----- -----
- transplanting REV2
- change "f", but keep size N
(via 'patch.patch()')
- aborted while patching
N+1
- release wlock
- 'dirstate.write()' -1 -1 N
- 'hg status' shows "r1" as "clean" -1 -1 N
---- ----------------------------------- ---- ----- -----
To reproduce this issue in tests certainly, this patch emulates some
timing critical actions as below:
- change "f" at N
'patch.patch()' with 'fakepatchtime.py' explicitly changes mtime
of patched files to "2000-01-01 00:00" (= N).
- 'dirstate.write()' via 'repo.commit()' at N
'fakedirstatewritetime.py' forces 'pack_dirstate()' to use
"2000-01-01 00:00" as "now", only if 'pack_dirstate()' is invoked
via 'committablectx.markcommitted()'.
- 'dirstate.write()' via releasing wlock at N+1 (or "not at N")
'pack_dirstate()' via releasing wlock uses actual timestamp at
runtime as "now", and it should be different from the "2000-01-01
00:00" of "f".
BTW, this patch doesn't test cases below, even though 'patch.patch()'
is used similarly in these cases:
1. failure of 'hg import' or 'hg qpush'
2. success of 'hg import', 'hg qpush' or 'hg transplant'
Case (1) above doesn't cause this kind of issue, because:
- if patching is aborted by conflicts, changed files are committed
changed files are marked as CLEAN, even though they are partially
patched.
- otherwise, dirstate are fully restored by 'dirstateguard'
For example in timetable above, timestamp of "f" in .hg/dirstate
is restored to -1 (or less than N), and subsequent 'hg status' can
detect changes correctly.
Case (2) always causes 'repo.status()' invocation via 'repo.commit()'
just after changing files inside same wlock scope.
---- ----------------------------------- ----------------
timestamp of "f"
----------------
dirstate file-
time action mem file system
---- ----------------------------------- ---- ----- -----
N *** ***
- make file "f" clean N
- execute 'hg foobar'
....
- 'dirstate.normal("f")' N ***
(e.g. via dirty check
or previous 'repo.commit()')
- change "f", but keep size N
- 'repo.status()' (*1)
(via 'repo.commit()')
---- ----------------------------------- ---- ----- -----
At a glance, 'repo.status()' at (*1) seems to cause similar issue (=
"changed files are treated as clean"), but actually doesn't.
'dirstate._lastnormaltime' should be N at (*1) above, because
'dirstate.normal()' via dirty check is finished at N.
Therefore, "f" changed at N (= 'dirstate._lastnormaltime') is forcibly
treated as "unsure" at (*1), and changes are detected as expected (see
'dirstate.status()' for detail).
If 'hg import' is executed with '--no-commit', 'repo.status()' isn't
invoked just after changing files inside same wlock scope.
But preceding 'dirstate.normal()' is invoked inside another wlock
scope via 'cmdutil.bailifchanged()', and in-memory changes should be
flushed at the end of that scope.
Therefore, timestamp N of clean "f" should be replaced by -1, if
'dirstate.write()' is invoked at N. It means that condition of this
issue isn't satisfied.
author | FUJIWARA Katsunori <foozy@lares.dti.ne.jp> |
---|---|
date | Wed, 08 Jul 2015 17:01:09 +0900 |
parents | c63a09b6b337 |
children | 4b0fc75f9403 |
line wrap: on
line source
$ hg init t $ cd t $ cat > unix2dos.py <<EOF > import sys > > for path in sys.argv[1:]: > data = file(path, 'rb').read() > data = data.replace('\n', '\r\n') > file(path, 'wb').write(data) > EOF $ echo '[hooks]' >> .hg/hgrc $ echo 'pretxncommit.crlf = python:hgext.win32text.forbidcrlf' >> .hg/hgrc $ echo 'pretxnchangegroup.crlf = python:hgext.win32text.forbidcrlf' >> .hg/hgrc $ cat .hg/hgrc [hooks] pretxncommit.crlf = python:hgext.win32text.forbidcrlf pretxnchangegroup.crlf = python:hgext.win32text.forbidcrlf $ echo hello > f $ hg add f commit should succeed $ hg ci -m 1 $ hg clone . ../zoz updating to branch default 1 files updated, 0 files merged, 0 files removed, 0 files unresolved $ cp .hg/hgrc ../zoz/.hg $ python unix2dos.py f commit should fail $ hg ci -m 2.1 attempt to commit or push text file(s) using CRLF line endings in f583ea08d42a: f transaction abort! rollback completed abort: pretxncommit.crlf hook failed [255] $ mv .hg/hgrc .hg/hgrc.bak commits should succeed $ hg ci -m 2 $ hg cp f g $ hg ci -m 2.2 push should fail $ hg push ../zoz pushing to ../zoz searching for changes adding changesets adding manifests adding file changes added 2 changesets with 2 changes to 2 files attempt to commit or push text file(s) using CRLF line endings in bc2d09796734: g in b1aa5cde7ff4: f To prevent this mistake in your local repository, add to Mercurial.ini or .hg/hgrc: [hooks] pretxncommit.crlf = python:hgext.win32text.forbidcrlf and also consider adding: [extensions] win32text = [encode] ** = cleverencode: [decode] ** = cleverdecode: transaction abort! rollback completed abort: pretxnchangegroup.crlf hook failed [255] $ mv .hg/hgrc.bak .hg/hgrc $ echo hello > f $ hg rm g commit should succeed $ hg ci -m 2.3 push should succeed $ hg push ../zoz pushing to ../zoz searching for changes adding changesets adding manifests adding file changes added 3 changesets with 3 changes to 2 files and now for something completely different $ mkdir d $ echo hello > d/f2 $ python unix2dos.py d/f2 $ hg add d/f2 $ hg ci -m 3 attempt to commit or push text file(s) using CRLF line endings in 053ba1a3035a: d/f2 transaction abort! rollback completed abort: pretxncommit.crlf hook failed [255] $ hg revert -a forgetting d/f2 (glob) $ rm d/f2 $ hg rem f $ hg ci -m 4 $ $PYTHON -c 'file("bin", "wb").write("hello\x00\x0D\x0A")' $ hg add bin $ hg ci -m 5 $ hg log -v changeset: 5:f0b1c8d75fce tag: tip user: test date: Thu Jan 01 00:00:00 1970 +0000 files: bin description: 5 changeset: 4:77796dbcd4ad user: test date: Thu Jan 01 00:00:00 1970 +0000 files: f description: 4 changeset: 3:7c1b5430b350 user: test date: Thu Jan 01 00:00:00 1970 +0000 files: f g description: 2.3 changeset: 2:bc2d09796734 user: test date: Thu Jan 01 00:00:00 1970 +0000 files: g description: 2.2 changeset: 1:b1aa5cde7ff4 user: test date: Thu Jan 01 00:00:00 1970 +0000 files: f description: 2 changeset: 0:fcf06d5c4e1d user: test date: Thu Jan 01 00:00:00 1970 +0000 files: f description: 1 $ hg clone . dupe updating to branch default 1 files updated, 0 files merged, 0 files removed, 0 files unresolved $ for x in a b c d; do echo content > dupe/$x; done $ hg -R dupe add adding dupe/a (glob) adding dupe/b (glob) adding dupe/c (glob) adding dupe/d (glob) $ python unix2dos.py dupe/b dupe/c dupe/d $ hg -R dupe ci -m a dupe/a $ hg -R dupe ci -m b/c dupe/[bc] $ hg -R dupe ci -m d dupe/d $ hg -R dupe log -v changeset: 8:67ac5962ab43 tag: tip user: test date: Thu Jan 01 00:00:00 1970 +0000 files: d description: d changeset: 7:68c127d1834e user: test date: Thu Jan 01 00:00:00 1970 +0000 files: b c description: b/c changeset: 6:adbf8bf7f31d user: test date: Thu Jan 01 00:00:00 1970 +0000 files: a description: a changeset: 5:f0b1c8d75fce user: test date: Thu Jan 01 00:00:00 1970 +0000 files: bin description: 5 changeset: 4:77796dbcd4ad user: test date: Thu Jan 01 00:00:00 1970 +0000 files: f description: 4 changeset: 3:7c1b5430b350 user: test date: Thu Jan 01 00:00:00 1970 +0000 files: f g description: 2.3 changeset: 2:bc2d09796734 user: test date: Thu Jan 01 00:00:00 1970 +0000 files: g description: 2.2 changeset: 1:b1aa5cde7ff4 user: test date: Thu Jan 01 00:00:00 1970 +0000 files: f description: 2 changeset: 0:fcf06d5c4e1d user: test date: Thu Jan 01 00:00:00 1970 +0000 files: f description: 1 $ hg pull dupe pulling from dupe searching for changes adding changesets adding manifests adding file changes added 3 changesets with 4 changes to 4 files attempt to commit or push text file(s) using CRLF line endings in 67ac5962ab43: d in 68c127d1834e: b in 68c127d1834e: c To prevent this mistake in your local repository, add to Mercurial.ini or .hg/hgrc: [hooks] pretxncommit.crlf = python:hgext.win32text.forbidcrlf and also consider adding: [extensions] win32text = [encode] ** = cleverencode: [decode] ** = cleverdecode: transaction abort! rollback completed abort: pretxnchangegroup.crlf hook failed [255] $ hg log -v changeset: 5:f0b1c8d75fce tag: tip user: test date: Thu Jan 01 00:00:00 1970 +0000 files: bin description: 5 changeset: 4:77796dbcd4ad user: test date: Thu Jan 01 00:00:00 1970 +0000 files: f description: 4 changeset: 3:7c1b5430b350 user: test date: Thu Jan 01 00:00:00 1970 +0000 files: f g description: 2.3 changeset: 2:bc2d09796734 user: test date: Thu Jan 01 00:00:00 1970 +0000 files: g description: 2.2 changeset: 1:b1aa5cde7ff4 user: test date: Thu Jan 01 00:00:00 1970 +0000 files: f description: 2 changeset: 0:fcf06d5c4e1d user: test date: Thu Jan 01 00:00:00 1970 +0000 files: f description: 1 $ rm .hg/hgrc $ (echo some; echo text) > f3 $ $PYTHON -c 'file("f4.bat", "wb").write("rem empty\x0D\x0A")' $ hg add f3 f4.bat $ hg ci -m 6 $ cat bin hello\x00\r (esc) $ cat f3 some text $ cat f4.bat rem empty\r (esc) $ echo '[extensions]' >> .hg/hgrc $ echo 'win32text = ' >> .hg/hgrc $ echo '[decode]' >> .hg/hgrc $ echo '** = cleverdecode:' >> .hg/hgrc $ echo '[encode]' >> .hg/hgrc $ echo '** = cleverencode:' >> .hg/hgrc $ cat .hg/hgrc [extensions] win32text = [decode] ** = cleverdecode: [encode] ** = cleverencode: Trigger deprecation warning: $ hg id -t win32text is deprecated: http://mercurial.selenic.com/wiki/Win32TextExtension tip Disable warning: $ echo '[win32text]' >> .hg/hgrc $ echo 'warn = no' >> .hg/hgrc $ hg id -t tip $ rm f3 f4.bat bin $ hg co -C WARNING: f4.bat already has CRLF line endings and does not need EOL conversion by the win32text plugin. Before your next commit, please reconsider your encode/decode settings in Mercurial.ini or $TESTTMP/t/.hg/hgrc. (glob) 3 files updated, 0 files merged, 0 files removed, 0 files unresolved $ cat bin hello\x00\r (esc) $ cat f3 some\r (esc) text\r (esc) $ cat f4.bat rem empty\r (esc) $ $PYTHON -c 'file("f5.sh", "wb").write("# empty\x0D\x0A")' $ hg add f5.sh $ hg ci -m 7 $ cat f5.sh # empty\r (esc) $ hg cat f5.sh # empty $ echo '% just linefeed' > linefeed $ hg ci -qAm 8 linefeed $ cat linefeed % just linefeed $ hg cat linefeed % just linefeed $ hg st -q $ hg revert -a linefeed no changes needed to linefeed $ cat linefeed % just linefeed $ hg st -q $ echo modified >> linefeed $ hg st -q M linefeed $ hg revert -a reverting linefeed $ hg st -q $ cat linefeed % just linefeed\r (esc) $ cd ..