view Makefile @ 42745:4d20b1fe8a72

rust-discovery: using from Python code

As previously done in other topics, the Rust version is used if it's been
built.

The version fully in Rust of the partialdiscovery class has the performance
advantage over the Python version (actually using the Rust MissingAncestor) if
the undecided set is big enough. Otherwise no sampling occurs, and the
discovery is reasonably fast anyway.

Note: it's hard to predict the size of the initial undecided set, it can
depend on the kind of topological changes between the local and remote graphs.
The point of the Rust version is to make the bad cases acceptable.

More specifically, the performance advantages are:

- faster sampling, especially takefullsample()
- much faster addmissings() in almost all cases (see commit message in
  grandparent of the present changeset)
- no conversion cost of the undecided set at the interface between Rust and
  Python

== Measurements with big undecided sets

For an extreme example, discovery between mozilla-try and mozilla-unified
(over one million undecided revisions, same case as in dbd0fcca6dfc), we
get roughly a x2.5/x3 better performance:

Growing sample size (5% starting with 200): time goes down from
210 to 72 seconds.
Constant sample size of 200: time down from 1853 to 659 seconds.

With a sample size computed from number of roots and heads of the
undecided set (`respectsize` is `False`), here are perfdiscovery results:

Before ! wall 9.358729 comb 9.360000 user 9.310000 sys 0.050000 (median of 50)
After  ! wall 3.793819 comb 3.790000 user 3.750000 sys 0.040000 (median of 50)

In that later case, the sample sizes are routinely in the hundreds of
thousands of revisions. While still faster, the Rust iteration in
addmissings has less of an advantage than with smaller sample sizes, but
one sees addcommons becoming faster, probably a consequence of not having
to copy big sets back and forth.

This example is not a goal in itself, but it showcases several different
areas in which the process can become slow, due to different factors, and
how this full Rust version can help.

== Measurements with small undecided sets

In cases the undecided set is small enough than no sampling occurs,
the Rust version has a disadvantage at init if `targetheads` is really big
(some time is lost in the translation to Rust data structures),
and that is compensated by the faster `addmissings()`.

On a private repository with over one million commits, we still get a minor
improvement, of 6.8%:

  Before ! wall 0.593585 comb 0.590000 user 0.550000 sys 0.040000 (median of 50)
  After  ! wall 0.553035 comb 0.550000 user 0.520000 sys 0.030000 (median of 50)

What's interesting in that case is the first addinfo() at 180ms for Rust and
233ms for Python+C, mostly due to add_missings and the children cache
computation being done in less than 0.2ms on the Rust side vs over 40ms on the
Python side.

The worst case we have on hand is with mozilla-try, prepared with
discovery-helper.sh for 10 heads and depth 10, time goes up 2.2% on the median.
In this case `targetheads` is really huge with 165842 server heads.

  Before ! wall 0.823884 comb 0.810000 user 0.790000 sys 0.020000 (median of 50)
  After  ! wall 0.842607 comb 0.840000 user 0.800000 sys 0.040000 (median of 50)

If that would be considered a problem, more adjustments can be made, which are
prematurate at this stage: cooking special variants of methods of the inner
MissingAncestors object, retrieving local heads directly from Rust to avoid
the cost of conversion. Effort would probably be better spent at this point
improving the surroundings if needed.

Here's another data point with a smaller repository, pypy, where performance
is almost identical

 Before ! wall 0.015121 comb 0.030000 user 0.020000 sys 0.010000 (median of 186)
 After  ! wall 0.015009 comb 0.010000 user 0.010000 sys 0.000000 (median of 184)

Differential Revision: https://phab.mercurial-scm.org/D6430

# If you want to change PREFIX, do not just edit it below. The changed
# value wont get passed on to recursive make calls. You should instead
# override the variable on the command like:
#
# % make PREFIX=/opt/ install

export PREFIX=/usr/local
PYTHON?=python
$(eval HGROOT := $(shell pwd))
HGPYTHONS ?= $(HGROOT)/build/pythons
PURE=
PYFILESCMD=find mercurial hgext doc -name '*.py'
PYFILES:=$(shell $(PYFILESCMD))
DOCFILES=mercurial/help/*.txt
export LANGUAGE=C
export LC_ALL=C
TESTFLAGS ?= $(shell echo $$HGTESTFLAGS)
OSXVERSIONFLAGS ?= $(shell echo $$OSXVERSIONFLAGS)

# Set this to e.g. "mingw32" to use a non-default compiler.
COMPILER=

COMPILERFLAG_tmp_ =
COMPILERFLAG_tmp_${COMPILER} ?= -c $(COMPILER)
COMPILERFLAG=${COMPILERFLAG_tmp_${COMPILER}}

help:
	@echo 'Commonly used make targets:'
	@echo '  all          - build program and documentation'
	@echo '  install      - install program and man pages to $$PREFIX ($(PREFIX))'
	@echo '  install-home - install with setup.py install --home=$$HOME ($(HOME))'
	@echo '  local        - build for inplace usage'
	@echo '  tests        - run all tests in the automatic test suite'
	@echo '  test-foo     - run only specified tests (e.g. test-merge1.t)'
	@echo '  dist         - run all tests and create a source tarball in dist/'
	@echo '  clean        - remove files created by other targets'
	@echo '                 (except installed files or dist source tarball)'
	@echo '  update-pot   - update i18n/hg.pot'
	@echo
	@echo 'Example for a system-wide installation under /usr/local:'
	@echo '  make all && su -c "make install" && hg version'
	@echo
	@echo 'Example for a local installation (usable in this directory):'
	@echo '  make local && ./hg version'

all: build doc

local:
	$(PYTHON) setup.py $(PURE) \
	  build_py -c -d . \
	  build_ext $(COMPILERFLAG) -i \
	  build_hgexe $(COMPILERFLAG) -i \
	  build_mo
	env HGRCPATH= $(PYTHON) hg version

build:
	$(PYTHON) setup.py $(PURE) build $(COMPILERFLAG)

wheel:
	FORCE_SETUPTOOLS=1 $(PYTHON) setup.py $(PURE) bdist_wheel $(COMPILERFLAG)

doc:
	$(MAKE) -C doc

cleanbutpackages:
	-$(PYTHON) setup.py clean --all # ignore errors from this command
	find contrib doc hgext hgext3rd i18n mercurial tests hgdemandimport \
		\( -name '*.py[cdo]' -o -name '*.so' \) -exec rm -f '{}' ';'
	rm -f MANIFEST MANIFEST.in hgext/__index__.py tests/*.err
	rm -f mercurial/__modulepolicy__.py
	if test -d .hg; then rm -f mercurial/__version__.py; fi
	rm -rf build mercurial/locale
	$(MAKE) -C doc clean
	$(MAKE) -C contrib/chg distclean
	rm -rf rust/target
	rm -f mercurial/rustext.so

clean: cleanbutpackages
	rm -rf packages

install: install-bin install-doc

install-bin: build
	$(PYTHON) setup.py $(PURE) install --root="$(DESTDIR)/" --prefix="$(PREFIX)" --force

install-doc: doc
	cd doc && $(MAKE) $(MFLAGS) install

install-home: install-home-bin install-home-doc

install-home-bin: build
	$(PYTHON) setup.py $(PURE) install --home="$(HOME)" --prefix="" --force

install-home-doc: doc
	cd doc && $(MAKE) $(MFLAGS) PREFIX="$(HOME)" install

MANIFEST-doc:
	$(MAKE) -C doc MANIFEST

MANIFEST.in: MANIFEST-doc
	hg manifest | sed -e 's/^/include /' > MANIFEST.in
	echo include mercurial/__version__.py >> MANIFEST.in
	sed -e 's/^/include /' < doc/MANIFEST >> MANIFEST.in

dist:	tests dist-notests

dist-notests:	doc MANIFEST.in
	TAR_OPTIONS="--owner=root --group=root --mode=u+w,go-w,a+rX-s" $(PYTHON) setup.py -q sdist

check: tests

tests:
	cd tests && $(PYTHON) run-tests.py $(TESTFLAGS)

test-%:
	cd tests && $(PYTHON) run-tests.py $(TESTFLAGS) $@

testpy-%:
	@echo Looking for Python $* in $(HGPYTHONS)
	[ -e $(HGPYTHONS)/$*/bin/python ] || ( \
	cd $$(mktemp --directory --tmpdir) && \
        $(MAKE) -f $(HGROOT)/contrib/Makefile.python PYTHONVER=$* PREFIX=$(HGPYTHONS)/$* python )
	cd tests && $(HGPYTHONS)/$*/bin/python run-tests.py $(TESTFLAGS)

check-code:
	hg manifest | xargs python contrib/check-code.py

format-c:
	clang-format --style file -i \
	  `hg files 'set:(**.c or **.cc or **.h) and not "listfile:contrib/clang-format-ignorelist"'`

update-pot: i18n/hg.pot

i18n/hg.pot: $(PYFILES) $(DOCFILES) i18n/posplit i18n/hggettext
	$(PYTHON) i18n/hggettext mercurial/commands.py \
	  hgext/*.py hgext/*/__init__.py \
	  mercurial/fileset.py mercurial/revset.py \
	  mercurial/templatefilters.py \
	  mercurial/templatefuncs.py \
	  mercurial/templatekw.py \
	  mercurial/filemerge.py \
	  mercurial/hgweb/webcommands.py \
	  mercurial/util.py \
	  $(DOCFILES) > i18n/hg.pot.tmp
        # All strings marked for translation in Mercurial contain
        # ASCII characters only. But some files contain string
        # literals like this '\037\213'. xgettext thinks it has to
        # parse them even though they are not marked for translation.
        # Extracting with an explicit encoding of ISO-8859-1 will make
        # xgettext "parse" and ignore them.
	$(PYFILESCMD) | xargs \
	  xgettext --package-name "Mercurial" \
	  --msgid-bugs-address "<[e-mail]>" \
	  --copyright-holder "Matt Mackall <[e-mail]> and others" \
	  --from-code ISO-8859-1 --join --sort-by-file --add-comments=i18n: \
	  -d hg -p i18n -o hg.pot.tmp
	$(PYTHON) i18n/posplit i18n/hg.pot.tmp
        # The target file is not created before the last step. So it never is in
        # an intermediate state.
	mv -f i18n/hg.pot.tmp i18n/hg.pot

%.po: i18n/hg.pot
        # work on a temporary copy for never having a half completed target
	cp $@ $@.tmp
	msgmerge --no-location --update $@.tmp $^
	mv -f $@.tmp $@

# Packaging targets

packaging_targets := \
  centos5 \
  centos6 \
  centos7 \
  deb \
  docker-centos5 \
  docker-centos6 \
  docker-centos7 \
  docker-debian-jessie \
  docker-debian-stretch \
  docker-fedora20 \
  docker-fedora21 \
  docker-fedora28 \
  docker-fedora29 \
  docker-ubuntu-trusty \
  docker-ubuntu-trusty-ppa \
  docker-ubuntu-xenial \
  docker-ubuntu-xenial-ppa \
  docker-ubuntu-artful \
  docker-ubuntu-artful-ppa \
  docker-ubuntu-bionic \
  docker-ubuntu-bionic-ppa \
  fedora20 \
  fedora21 \
  fedora28 \
  fedora29 \
  linux-wheels \
  linux-wheels-x86_64 \
  linux-wheels-i686 \
  ppa

# Forward packaging targets for convenience.
$(packaging_targets):
	$(MAKE) -C contrib/packaging $@

osx:
	rm -rf build/mercurial
	/usr/bin/python2.7 setup.py install --optimize=1 \
	  --root=build/mercurial/ --prefix=/usr/local/ \
	  --install-lib=/Library/Python/2.7/site-packages/
	make -C doc all install DESTDIR="$(PWD)/build/mercurial/"
        # Place a bogon .DS_Store file in the target dir so we can be
        # sure it doesn't get included in the final package.
	touch build/mercurial/.DS_Store
        # install zsh completions - this location appears to be
        # searched by default as of macOS Sierra.
	install -d build/mercurial/usr/local/share/zsh/site-functions/
	install -m 0644 contrib/zsh_completion build/mercurial/usr/local/share/zsh/site-functions/_hg
        # install bash completions - there doesn't appear to be a
        # place that's searched by default for bash, so we'll follow
        # the lead of Apple's git install and just put it in a
        # location of our own.
	install -d build/mercurial/usr/local/hg/contrib/
	install -m 0644 contrib/bash_completion build/mercurial/usr/local/hg/contrib/hg-completion.bash
	make -C contrib/chg \
	  HGPATH=/usr/local/bin/hg \
	  PYTHON=/usr/bin/python2.7 \
	  HGEXTDIR=/Library/Python/2.7/site-packages/hgext \
	  DESTDIR=../../build/mercurial \
	  PREFIX=/usr/local \
	  clean install
	mkdir -p $${OUTPUTDIR:-dist}
	HGVER=$$(python contrib/genosxversion.py $(OSXVERSIONFLAGS) build/mercurial/Library/Python/2.7/site-packages/mercurial/__version__.py) && \
	OSXVER=$$(sw_vers -productVersion | cut -d. -f1,2) && \
	pkgbuild --filter \\.DS_Store --root build/mercurial/ \
	  --identifier org.mercurial-scm.mercurial \
	  --version "$${HGVER}" \
	  build/mercurial.pkg && \
	productbuild --distribution contrib/packaging/macosx/distribution.xml \
	  --package-path build/ \
	  --version "$${HGVER}" \
	  --resources contrib/packaging/macosx/ \
	  "$${OUTPUTDIR:-dist/}"/Mercurial-"$${HGVER}"-macosx"$${OSXVER}".pkg

.PHONY: help all local build doc cleanbutpackages clean install install-bin \
	install-doc install-home install-home-bin install-home-doc \
	dist dist-notests check tests check-code format-c update-pot \
	$(packaging_targets) \
	osx