view tests/test-contrib.t @ 22288:4e2559841d6c

largefiles: update largefiles even if rebase is aborted by conflict

Before this patch, largefiles in the working directory aren't updated
correctly, if rebase is aborted by conflict. This prevents users from
viewing appropriate largefiles while resolving conflicts.

While rebase, largefiles in the working directory are updated only at
successful committing in the special code path of
"lfilesrepo.commit()".

To update largefiles even if rebase is aborted by conflict, this patch
centralizes the logic of updating largefiles in the working directory
into the "mergeupdate" wrapping "merge.update".


This is a temporary way to fix with less changes. For fundamental
resolution of this kind of problems in the future, largefiles in the
working directory should be updated with other (normal) files
simultaneously while "merge.update" execution: maybe by hooking
"applyupdates".

"Action list based updating" introduced by hooking "applyupdates" will
also improve performance of updating, because it automatically
decreases target files to be checked.


Just after this patch, there are some improper things in "Case 0" code
path of "lfilesrepo.commit()":

  - "updatelfiles" invocation is redundant for rebase
  - detailed comment doesn't meet to rebase behavior

These will be resolved after the subsequent patch for transplant,
because this code path is shared with transplant.


Even though replacing "merge.update" in rebase extension by "hg.merge"
can also avoid this problem, this patch chooses centralizing the logic
into "mergeupdate", because:

  - "merge.update" invocation in rebase extension can't be directly
    replaced by "hg.merge", because:

    - rebase requires some extra arguments, which "hg.merge" doesn't
      take (e.g. "ancestor")

    - rebase doesn't require statistics information forcibly displayed
      in "hg.merge"

  - introducing "mergeupdate" can resolve also problem of some other
    code paths directly using "merge.update"

    largefiles in the working directory aren't updated regardless of
    the result of commands below, before this patch:

    - backout (for revisions other than the parent revision of the
      working directory without "--merge")

    - graft

    - histedit (for revisions other than the parent of the working
      directory


When "partial" is specified, "merge.update" doesn't update dirstate
entries for standins, even though standins themselves are updated.

In this case, "normallookup" should be used to mark largefiles as
"possibly dirty" forcibly, because applying "normal" on lfdirstate
treats them as "clean" unexpectedly.

This is reason why "normallookup=partial" is specified for
"lfcommands.updatelfiles".


This patch doesn't test "hg rebase --continue", because it doesn't
work correctly if largefiles in the working directory are modified
manually while resolving conflicts. This will be fixed in the next
step of refactoring for largefiles.

All changes of tests/*.t files other than test-largefiles-update.t in
this patch come from invoking "updatelfiles" not after but before
statistics output of "hg.update", "hg.clean" and "hg.merge".

Set vars:

  $ CONTRIBDIR="$TESTDIR/../contrib"

Prepare repo-a:

  $ hg init repo-a
  $ cd repo-a

  $ echo this is file a > a
  $ hg add a
  $ hg commit -m first

  $ echo adding to file a >> a
  $ hg commit -m second

  $ echo adding more to file a >> a
  $ hg commit -m third

  $ hg verify
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  1 files, 3 changesets, 3 total revisions

Dumping revlog of file a to stdout:

  $ python "$CONTRIBDIR/dumprevlog" .hg/store/data/a.i
  file: .hg/store/data/a.i
  node: 183d2312b35066fb6b3b449b84efc370d50993d0
  linkrev: 0
  parents: 0000000000000000000000000000000000000000 0000000000000000000000000000000000000000
  length: 15
  -start-
  this is file a
  
  -end-
  node: b1047953b6e6b633c0d8197eaa5116fbdfd3095b
  linkrev: 1
  parents: 183d2312b35066fb6b3b449b84efc370d50993d0 0000000000000000000000000000000000000000
  length: 32
  -start-
  this is file a
  adding to file a
  
  -end-
  node: 8c4fd1f7129b8cdec6c7f58bf48fb5237a4030c1
  linkrev: 2
  parents: b1047953b6e6b633c0d8197eaa5116fbdfd3095b 0000000000000000000000000000000000000000
  length: 54
  -start-
  this is file a
  adding to file a
  adding more to file a
  
  -end-

Dump all revlogs to file repo.dump:

  $ find .hg/store -name "*.i" | sort | xargs python "$CONTRIBDIR/dumprevlog" > ../repo.dump
  $ cd ..

Undumping into repo-b:

  $ hg init repo-b
  $ cd repo-b
  $ python "$CONTRIBDIR/undumprevlog" < ../repo.dump
  .hg/store/00changelog.i
  .hg/store/00manifest.i
  .hg/store/data/a.i
  $ cd ..

Rebuild fncache with clone --pull:

  $ hg clone --pull -U repo-b repo-c
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 3 changesets with 3 changes to 1 files

Verify:

  $ hg -R repo-c verify
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  1 files, 3 changesets, 3 total revisions

Compare repos:

  $ hg -R repo-c incoming repo-a
  comparing with repo-a
  searching for changes
  no changes found
  [1]

  $ hg -R repo-a incoming repo-c
  comparing with repo-c
  searching for changes
  no changes found
  [1]

Test simplemerge command:

  $ cp "$CONTRIBDIR/simplemerge" .
  $ echo base > base
  $ echo local > local
  $ cat base >> local
  $ cp local orig
  $ cat base > other
  $ echo other >> other

changing local directly

  $ python simplemerge local base other && echo "merge succeeded"
  merge succeeded
  $ cat local
  local
  base
  other
  $ cp orig local

printing to stdout

  $ python simplemerge -p local base other
  local
  base
  other

local:

  $ cat local
  local
  base

conflicts

  $ cp base conflict-local
  $ cp other conflict-other
  $ echo not other >> conflict-local
  $ echo end >> conflict-local
  $ echo end >> conflict-other

  $ python simplemerge -p conflict-local base conflict-other
  base
  <<<<<<< conflict-local
  not other
  end
  =======
  other
  end
  >>>>>>> conflict-other
  warning: conflicts during merge.
  [1]

1 label

  $ python simplemerge -p -L foo conflict-local base conflict-other
  base
  <<<<<<< foo
  not other
  end
  =======
  other
  end
  >>>>>>> conflict-other
  warning: conflicts during merge.
  [1]

2 labels

  $ python simplemerge -p -L foo -L bar conflict-local base conflict-other
  base
  <<<<<<< foo
  not other
  end
  =======
  other
  end
  >>>>>>> bar
  warning: conflicts during merge.
  [1]

3 labels

  $ python simplemerge -p -L foo -L bar -L base conflict-local base conflict-other
  base
  <<<<<<< foo
  not other
  end
  ||||||| base
  =======
  other
  end
  >>>>>>> bar
  warning: conflicts during merge.
  [1]

too many labels

  $ python simplemerge -p -L foo -L bar -L baz -L buz conflict-local base conflict-other
  abort: can only specify three labels.
  [255]

binary file

  $ python -c "f = file('binary-local', 'w'); f.write('\x00'); f.close()"
  $ cat orig >> binary-local
  $ python simplemerge -p binary-local base other
  warning: binary-local looks like a binary file.
  [1]

binary file --text

  $ python simplemerge -a -p binary-local base other 2>&1
  warning: binary-local looks like a binary file.
  \x00local (esc)
  base
  other

help

  $ python simplemerge --help
  simplemerge [OPTS] LOCAL BASE OTHER
  
      Simple three-way file merge utility with a minimal feature set.
  
      Apply to LOCAL the changes necessary to go from BASE to OTHER.
  
      By default, LOCAL is overwritten with the results of this operation.
  
  options:
   -L --label       labels to use on conflict markers
   -a --text        treat all files as text
   -p --print       print results instead of overwriting LOCAL
      --no-minimal  no effect (DEPRECATED)
   -h --help        display help and exit
   -q --quiet       suppress output

wrong number of arguments

  $ python simplemerge
  simplemerge: wrong number of arguments
  simplemerge [OPTS] LOCAL BASE OTHER
  
      Simple three-way file merge utility with a minimal feature set.
  
      Apply to LOCAL the changes necessary to go from BASE to OTHER.
  
      By default, LOCAL is overwritten with the results of this operation.
  
  options:
   -L --label       labels to use on conflict markers
   -a --text        treat all files as text
   -p --print       print results instead of overwriting LOCAL
      --no-minimal  no effect (DEPRECATED)
   -h --help        display help and exit
   -q --quiet       suppress output
  [1]

bad option

  $ python simplemerge --foo -p local base other
  simplemerge: option --foo not recognized
  simplemerge [OPTS] LOCAL BASE OTHER
  
      Simple three-way file merge utility with a minimal feature set.
  
      Apply to LOCAL the changes necessary to go from BASE to OTHER.
  
      By default, LOCAL is overwritten with the results of this operation.
  
  options:
   -L --label       labels to use on conflict markers
   -a --text        treat all files as text
   -p --print       print results instead of overwriting LOCAL
      --no-minimal  no effect (DEPRECATED)
   -h --help        display help and exit
   -q --quiet       suppress output
  [1]