Mercurial > hg
view tests/test-convert-bzr.t @ 22288:4e2559841d6c
largefiles: update largefiles even if rebase is aborted by conflict
Before this patch, largefiles in the working directory aren't updated
correctly, if rebase is aborted by conflict. This prevents users from
viewing appropriate largefiles while resolving conflicts.
While rebase, largefiles in the working directory are updated only at
successful committing in the special code path of
"lfilesrepo.commit()".
To update largefiles even if rebase is aborted by conflict, this patch
centralizes the logic of updating largefiles in the working directory
into the "mergeupdate" wrapping "merge.update".
This is a temporary way to fix with less changes. For fundamental
resolution of this kind of problems in the future, largefiles in the
working directory should be updated with other (normal) files
simultaneously while "merge.update" execution: maybe by hooking
"applyupdates".
"Action list based updating" introduced by hooking "applyupdates" will
also improve performance of updating, because it automatically
decreases target files to be checked.
Just after this patch, there are some improper things in "Case 0" code
path of "lfilesrepo.commit()":
- "updatelfiles" invocation is redundant for rebase
- detailed comment doesn't meet to rebase behavior
These will be resolved after the subsequent patch for transplant,
because this code path is shared with transplant.
Even though replacing "merge.update" in rebase extension by "hg.merge"
can also avoid this problem, this patch chooses centralizing the logic
into "mergeupdate", because:
- "merge.update" invocation in rebase extension can't be directly
replaced by "hg.merge", because:
- rebase requires some extra arguments, which "hg.merge" doesn't
take (e.g. "ancestor")
- rebase doesn't require statistics information forcibly displayed
in "hg.merge"
- introducing "mergeupdate" can resolve also problem of some other
code paths directly using "merge.update"
largefiles in the working directory aren't updated regardless of
the result of commands below, before this patch:
- backout (for revisions other than the parent revision of the
working directory without "--merge")
- graft
- histedit (for revisions other than the parent of the working
directory
When "partial" is specified, "merge.update" doesn't update dirstate
entries for standins, even though standins themselves are updated.
In this case, "normallookup" should be used to mark largefiles as
"possibly dirty" forcibly, because applying "normal" on lfdirstate
treats them as "clean" unexpectedly.
This is reason why "normallookup=partial" is specified for
"lfcommands.updatelfiles".
This patch doesn't test "hg rebase --continue", because it doesn't
work correctly if largefiles in the working directory are modified
manually while resolving conflicts. This will be fixed in the next
step of refactoring for largefiles.
All changes of tests/*.t files other than test-largefiles-update.t in
this patch come from invoking "updatelfiles" not after but before
statistics output of "hg.update", "hg.clean" and "hg.merge".
author | FUJIWARA Katsunori <foozy@lares.dti.ne.jp> |
---|---|
date | Sun, 24 Aug 2014 23:47:26 +0900 |
parents | e57e2da803aa |
children | 89872688893f |
line wrap: on
line source
$ . "$TESTDIR/bzr-definitions" create and rename on the same file in the same step $ mkdir test-createandrename $ cd test-createandrename $ bzr init -q source test empty repo conversion (issue3233) $ hg convert source source-hg initializing destination source-hg repository scanning source... sorting... converting... back to the rename stuff $ cd source $ echo a > a $ echo c > c $ echo e > e $ bzr add -q a c e $ bzr commit -q -m 'Initial add: a, c, e' $ bzr mv a b a => b $ bzr mv c d c => d $ bzr mv e f e => f $ echo a2 >> a $ mkdir e $ bzr add -q a e $ bzr commit -q -m 'rename a into b, create a, rename c into d' $ cd .. $ hg convert source source-hg scanning source... sorting... converting... 1 Initial add: a, c, e 0 rename a into b, create a, rename c into d $ glog -R source-hg o 1@source "rename a into b, create a, rename c into d" files: a b c d e f | o 0@source "Initial add: a, c, e" files: a c e manifest $ hg manifest -R source-hg -r tip a b d f test --rev option $ hg convert -r 1 source source-1-hg initializing destination source-1-hg repository scanning source... sorting... converting... 0 Initial add: a, c, e $ glog -R source-1-hg o 0@source "Initial add: a, c, e" files: a c e test with filemap $ cat > filemap <<EOF > exclude a > EOF $ hg convert --filemap filemap source source-filemap-hg initializing destination source-filemap-hg repository scanning source... sorting... converting... 1 Initial add: a, c, e 0 rename a into b, create a, rename c into d $ hg -R source-filemap-hg manifest -r tip b d f convert from lightweight checkout $ bzr checkout --lightweight source source-light $ hg convert -s bzr source-light source-light-hg initializing destination source-light-hg repository warning: lightweight checkouts may cause conversion failures, try with a regular branch instead. $TESTTMP/test-createandrename/source-light does not look like a Bazaar repository abort: source-light: missing or unsupported repository [255] extract timestamps that look just like hg's {date|isodate}: yyyy-mm-dd HH:MM zzzz (no seconds!) compare timestamps $ cd source $ bzr log | \ > sed '/timestamp/!d;s/.\{15\}\([0-9: -]\{16\}\):.. \(.[0-9]\{4\}\)/\1 \2/' \ > > ../bzr-timestamps $ cd .. $ hg -R source-hg log --template "{date|isodate}\n" > hg-timestamps $ cmp bzr-timestamps hg-timestamps || diff -u bzr-timestamps hg-timestamps $ cd .. merge $ mkdir test-merge $ cd test-merge $ cat > helper.py <<EOF > import sys > from bzrlib import workingtree > wt = workingtree.WorkingTree.open('.') > > message, stamp = sys.argv[1:] > wt.commit(message, timestamp=int(stamp)) > EOF $ bzr init -q source $ cd source $ echo content > a $ echo content2 > b $ bzr add -q a b $ bzr commit -q -m 'Initial add' $ cd .. $ bzr branch -q source source-improve $ cd source $ echo more >> a $ python ../helper.py 'Editing a' 100 $ cd ../source-improve $ echo content3 >> b $ python ../helper.py 'Editing b' 200 $ cd ../source $ bzr merge -q ../source-improve $ bzr commit -q -m 'Merged improve branch' $ cd .. $ hg convert --datesort source source-hg initializing destination source-hg repository scanning source... sorting... converting... 3 Initial add 2 Editing a 1 Editing b 0 Merged improve branch $ glog -R source-hg o 3@source "Merged improve branch" files: |\ | o 2@source-improve "Editing b" files: b | | o | 1@source "Editing a" files: a |/ o 0@source "Initial add" files: a b $ cd .. #if symlink execbit symlinks and executable files $ mkdir test-symlinks $ cd test-symlinks $ bzr init -q source $ cd source $ touch program $ chmod +x program $ ln -s program altname $ mkdir d $ echo a > d/a $ ln -s a syma $ bzr add -q altname program syma d/a $ bzr commit -q -m 'Initial setup' $ touch newprog $ chmod +x newprog $ rm altname $ ln -s newprog altname $ chmod -x program $ bzr add -q newprog $ bzr commit -q -m 'Symlink changed, x bits changed' $ cd .. $ hg convert source source-hg initializing destination source-hg repository scanning source... sorting... converting... 1 Initial setup 0 Symlink changed, x bits changed $ manifest source-hg 0 % manifest of 0 644 @ altname 644 d/a 755 * program 644 @ syma $ manifest source-hg tip % manifest of tip 644 @ altname 644 d/a 755 * newprog 644 program 644 @ syma test the symlinks can be recreated $ cd source-hg $ hg up 5 files updated, 0 files merged, 0 files removed, 0 files unresolved $ hg cat syma; echo a $ cd ../.. #endif Multiple branches $ bzr init-repo -q --no-trees repo $ bzr init -q repo/trunk $ bzr co repo/trunk repo-trunk $ cd repo-trunk $ echo a > a $ bzr add -q a $ bzr ci -qm adda $ bzr tag trunk-tag Created tag trunk-tag. $ bzr switch -b branch Tree is up to date at revision 1. Switched to branch: *repo/branch/ (glob) $ sleep 1 $ echo b > b $ bzr add -q b $ bzr ci -qm addb $ bzr tag branch-tag Created tag branch-tag. $ bzr switch --force ../repo/trunk Updated to revision 1. Switched to branch: */repo/trunk/ (glob) $ sleep 1 $ echo a >> a $ bzr ci -qm changea $ cd .. $ hg convert --datesort repo repo-bzr initializing destination repo-bzr repository scanning source... sorting... converting... 2 adda 1 addb 0 changea updating tags $ (cd repo-bzr; glog) o 3@default "update tags" files: .hgtags | o 2@default "changea" files: a | | o 1@branch "addb" files: b |/ o 0@default "adda" files: a Test tags (converted identifiers are not stable because bzr ones are not and get incorporated in extra fields). $ hg -R repo-bzr tags tip 3:* (glob) branch-tag 1:* (glob) trunk-tag 0:* (glob) Nested repositories (issue3254) $ bzr init-repo -q --no-trees repo/inner $ bzr init -q repo/inner/trunk $ bzr co repo/inner/trunk inner-trunk $ cd inner-trunk $ echo b > b $ bzr add -q b $ bzr ci -qm addb $ cd .. $ hg convert --datesort repo noinner-bzr initializing destination noinner-bzr repository scanning source... sorting... converting... 2 adda 1 addb 0 changea updating tags