view tests/test-filebranch.t @ 22288:4e2559841d6c

largefiles: update largefiles even if rebase is aborted by conflict

Before this patch, largefiles in the working directory aren't updated
correctly, if rebase is aborted by conflict. This prevents users from
viewing appropriate largefiles while resolving conflicts.

While rebase, largefiles in the working directory are updated only at
successful committing in the special code path of
"lfilesrepo.commit()".

To update largefiles even if rebase is aborted by conflict, this patch
centralizes the logic of updating largefiles in the working directory
into the "mergeupdate" wrapping "merge.update".


This is a temporary way to fix with less changes. For fundamental
resolution of this kind of problems in the future, largefiles in the
working directory should be updated with other (normal) files
simultaneously while "merge.update" execution: maybe by hooking
"applyupdates".

"Action list based updating" introduced by hooking "applyupdates" will
also improve performance of updating, because it automatically
decreases target files to be checked.


Just after this patch, there are some improper things in "Case 0" code
path of "lfilesrepo.commit()":

  - "updatelfiles" invocation is redundant for rebase
  - detailed comment doesn't meet to rebase behavior

These will be resolved after the subsequent patch for transplant,
because this code path is shared with transplant.


Even though replacing "merge.update" in rebase extension by "hg.merge"
can also avoid this problem, this patch chooses centralizing the logic
into "mergeupdate", because:

  - "merge.update" invocation in rebase extension can't be directly
    replaced by "hg.merge", because:

    - rebase requires some extra arguments, which "hg.merge" doesn't
      take (e.g. "ancestor")

    - rebase doesn't require statistics information forcibly displayed
      in "hg.merge"

  - introducing "mergeupdate" can resolve also problem of some other
    code paths directly using "merge.update"

    largefiles in the working directory aren't updated regardless of
    the result of commands below, before this patch:

    - backout (for revisions other than the parent revision of the
      working directory without "--merge")

    - graft

    - histedit (for revisions other than the parent of the working
      directory


When "partial" is specified, "merge.update" doesn't update dirstate
entries for standins, even though standins themselves are updated.

In this case, "normallookup" should be used to mark largefiles as
"possibly dirty" forcibly, because applying "normal" on lfdirstate
treats them as "clean" unexpectedly.

This is reason why "normallookup=partial" is specified for
"lfcommands.updatelfiles".


This patch doesn't test "hg rebase --continue", because it doesn't
work correctly if largefiles in the working directory are modified
manually while resolving conflicts. This will be fixed in the next
step of refactoring for largefiles.

All changes of tests/*.t files other than test-largefiles-update.t in
this patch come from invoking "updatelfiles" not after but before
statistics output of "hg.update", "hg.clean" and "hg.merge".

This test makes sure that we don't mark a file as merged with its ancestor
when we do a merge.

  $ cat <<EOF > merge
  > import sys, os
  > print "merging for", os.path.basename(sys.argv[1])
  > EOF
  $ HGMERGE="python ../merge"; export HGMERGE

Creating base:

  $ hg init a
  $ cd a
  $ echo 1 > foo
  $ echo 1 > bar
  $ echo 1 > baz
  $ echo 1 > quux
  $ hg add foo bar baz quux
  $ hg commit -m "base"

  $ cd ..
  $ hg clone a b
  updating to branch default
  4 files updated, 0 files merged, 0 files removed, 0 files unresolved

Creating branch a:

  $ cd a
  $ echo 2a > foo
  $ echo 2a > bar
  $ hg commit -m "branch a"

Creating branch b:

  $ cd ..
  $ cd b
  $ echo 2b > foo
  $ echo 2b > baz
  $ hg commit -m "branch b"

We shouldn't have anything but n state here:

  $ hg debugstate --nodates | grep -v "^n"
  [1]

Merging:

  $ hg pull ../a
  pulling from ../a
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 2 changes to 2 files (+1 heads)
  (run 'hg heads' to see heads, 'hg merge' to merge)

  $ hg merge -v
  resolving manifests
  getting bar
  merging foo
  merging for foo
  1 files updated, 1 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)

  $ echo 2m > foo
  $ echo 2b > baz
  $ echo new > quux

We shouldn't have anything but foo in merge state here:

  $ hg debugstate --nodates | grep "^m"
  m 644          3 foo

  $ hg ci -m "merge"

main: we should have a merge here:

  $ hg debugindex --changelog
     rev    offset  length  ..... linkrev nodeid       p1           p2 (re)
       0         0      73  .....       0 cdca01651b96 000000000000 000000000000 (re)
       1        73      68  .....       1 f6718a9cb7f3 cdca01651b96 000000000000 (re)
       2       141      68  .....       2 bdd988058d16 cdca01651b96 000000000000 (re)
       3       209      66  .....       3 d8a521142a3c f6718a9cb7f3 bdd988058d16 (re)

log should show foo and quux changed:

  $ hg log -v -r tip
  changeset:   3:d8a521142a3c
  tag:         tip
  parent:      1:f6718a9cb7f3
  parent:      2:bdd988058d16
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  files:       foo quux
  description:
  merge
  
  

foo: we should have a merge here:

  $ hg debugindex foo
     rev    offset  length  ..... linkrev nodeid       p1           p2 (re)
       0         0       3  .....       0 b8e02f643373 000000000000 000000000000 (re)
       1         3       4  .....       1 2ffeddde1b65 b8e02f643373 000000000000 (re)
       2         7       4  .....       2 33d1fb69067a b8e02f643373 000000000000 (re)
       3        11       4  .....       3 aa27919ee430 2ffeddde1b65 33d1fb69067a (re)

bar: we should not have a merge here:

  $ hg debugindex bar
     rev    offset  length  ..... linkrev nodeid       p1           p2 (re)
       0         0       3  .....       0 b8e02f643373 000000000000 000000000000 (re)
       1         3       4  .....       2 33d1fb69067a b8e02f643373 000000000000 (re)

baz: we should not have a merge here:

  $ hg debugindex baz
     rev    offset  length  ..... linkrev nodeid       p1           p2 (re)
       0         0       3  .....       0 b8e02f643373 000000000000 000000000000 (re)
       1         3       4  .....       1 2ffeddde1b65 b8e02f643373 000000000000 (re)

quux: we should not have a merge here:

  $ hg debugindex quux
     rev    offset  length  ..... linkrev nodeid       p1           p2 (re)
       0         0       3  .....       0 b8e02f643373 000000000000 000000000000 (re)
       1         3       5  .....       3 6128c0f33108 b8e02f643373 000000000000 (re)

Manifest entries should match tips of all files:

  $ hg manifest --debug
  33d1fb69067a0139622a3fa3b7ba1cdb1367972e 644   bar
  2ffeddde1b65b4827f6746174a145474129fa2ce 644   baz
  aa27919ee4303cfd575e1fb932dd64d75aa08be4 644   foo
  6128c0f33108e8cfbb4e0824d13ae48b466d7280 644   quux

Everything should be clean now:

  $ hg status

  $ hg verify
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  4 files, 4 changesets, 10 total revisions

  $ cd ..