Mercurial > hg
view tests/test-mq-guards.t @ 22288:4e2559841d6c
largefiles: update largefiles even if rebase is aborted by conflict
Before this patch, largefiles in the working directory aren't updated
correctly, if rebase is aborted by conflict. This prevents users from
viewing appropriate largefiles while resolving conflicts.
While rebase, largefiles in the working directory are updated only at
successful committing in the special code path of
"lfilesrepo.commit()".
To update largefiles even if rebase is aborted by conflict, this patch
centralizes the logic of updating largefiles in the working directory
into the "mergeupdate" wrapping "merge.update".
This is a temporary way to fix with less changes. For fundamental
resolution of this kind of problems in the future, largefiles in the
working directory should be updated with other (normal) files
simultaneously while "merge.update" execution: maybe by hooking
"applyupdates".
"Action list based updating" introduced by hooking "applyupdates" will
also improve performance of updating, because it automatically
decreases target files to be checked.
Just after this patch, there are some improper things in "Case 0" code
path of "lfilesrepo.commit()":
- "updatelfiles" invocation is redundant for rebase
- detailed comment doesn't meet to rebase behavior
These will be resolved after the subsequent patch for transplant,
because this code path is shared with transplant.
Even though replacing "merge.update" in rebase extension by "hg.merge"
can also avoid this problem, this patch chooses centralizing the logic
into "mergeupdate", because:
- "merge.update" invocation in rebase extension can't be directly
replaced by "hg.merge", because:
- rebase requires some extra arguments, which "hg.merge" doesn't
take (e.g. "ancestor")
- rebase doesn't require statistics information forcibly displayed
in "hg.merge"
- introducing "mergeupdate" can resolve also problem of some other
code paths directly using "merge.update"
largefiles in the working directory aren't updated regardless of
the result of commands below, before this patch:
- backout (for revisions other than the parent revision of the
working directory without "--merge")
- graft
- histedit (for revisions other than the parent of the working
directory
When "partial" is specified, "merge.update" doesn't update dirstate
entries for standins, even though standins themselves are updated.
In this case, "normallookup" should be used to mark largefiles as
"possibly dirty" forcibly, because applying "normal" on lfdirstate
treats them as "clean" unexpectedly.
This is reason why "normallookup=partial" is specified for
"lfcommands.updatelfiles".
This patch doesn't test "hg rebase --continue", because it doesn't
work correctly if largefiles in the working directory are modified
manually while resolving conflicts. This will be fixed in the next
step of refactoring for largefiles.
All changes of tests/*.t files other than test-largefiles-update.t in
this patch come from invoking "updatelfiles" not after but before
statistics output of "hg.update", "hg.clean" and "hg.merge".
author | FUJIWARA Katsunori <foozy@lares.dti.ne.jp> |
---|---|
date | Sun, 24 Aug 2014 23:47:26 +0900 |
parents | 7731a2281cf0 |
children | fd0f0b0d316d |
line wrap: on
line source
$ echo "[extensions]" >> $HGRCPATH $ echo "mq=" >> $HGRCPATH $ hg init $ hg qinit $ echo x > x $ hg ci -Ama adding x $ hg qnew a.patch $ echo a > a $ hg add a $ hg qrefresh $ hg qnew b.patch $ echo b > b $ hg add b $ hg qrefresh $ hg qnew c.patch $ echo c > c $ hg add c $ hg qrefresh $ hg qpop -a popping c.patch popping b.patch popping a.patch patch queue now empty should fail $ hg qguard does-not-exist.patch +bleh abort: no patch named does-not-exist.patch [255] should fail $ hg qguard +fail abort: no patches applied [255] $ hg qpush applying a.patch now at: a.patch should guard a.patch $ hg qguard +a should print +a $ hg qguard a.patch: +a $ hg qpop popping a.patch patch queue now empty should fail $ hg qpush a.patch cannot push 'a.patch' - guarded by '+a' [1] $ hg qguard a.patch a.patch: +a should push b.patch $ hg qpush applying b.patch now at: b.patch $ hg qpop popping b.patch patch queue now empty test selection of an empty guard $ hg qselect "" abort: guard cannot be an empty string [255] $ hg qselect a number of unguarded, unapplied patches has changed from 2 to 3 should push a.patch $ hg qpush applying a.patch now at: a.patch $ hg qguard -- c.patch -a should print -a $ hg qguard c.patch c.patch: -a should skip c.patch $ hg qpush -a applying b.patch skipping c.patch - guarded by '-a' now at: b.patch $ hg qnext all patches applied [1] should display b.patch $ hg qtop b.patch $ hg qguard -n c.patch should push c.patch $ hg qpush -a applying c.patch now at: c.patch $ hg qpop -a popping c.patch popping b.patch popping a.patch patch queue now empty $ hg qselect -n guards deactivated number of unguarded, unapplied patches has changed from 3 to 2 should push all $ hg qpush -a applying b.patch applying c.patch now at: c.patch $ hg qpop -a popping c.patch popping b.patch patch queue now empty $ hg qguard a.patch +1 $ hg qguard b.patch +2 $ hg qselect 1 number of unguarded, unapplied patches has changed from 1 to 2 should push a.patch, not b.patch $ hg qpush applying a.patch now at: a.patch $ hg qpush applying c.patch now at: c.patch $ hg qpop -a popping c.patch popping a.patch patch queue now empty $ hg qselect 2 should push b.patch $ hg qpush applying b.patch now at: b.patch $ hg qpush -a applying c.patch now at: c.patch $ hg qprev b.patch Used to be an issue with holes in the patch sequence So, put one hole on the base and ask for topmost patch. $ hg qtop c.patch $ hg qpop -a popping c.patch popping b.patch patch queue now empty $ hg qselect 1 2 number of unguarded, unapplied patches has changed from 2 to 3 should push a.patch, b.patch $ hg qpush applying a.patch now at: a.patch $ hg qpush applying b.patch now at: b.patch $ hg qpop -a popping b.patch popping a.patch patch queue now empty $ hg qguard -- a.patch +1 +2 -3 $ hg qselect 1 2 3 number of unguarded, unapplied patches has changed from 3 to 2 list patches and guards $ hg qguard -l a.patch: +1 +2 -3 b.patch: +2 c.patch: unguarded have at least one patch applied to test coloring $ hg qpush applying b.patch now at: b.patch list patches and guards with color $ hg --config extensions.color= qguard --config color.mode=ansi \ > -l --color=always \x1b[0;30;1ma.patch\x1b[0m: \x1b[0;33m+1\x1b[0m \x1b[0;33m+2\x1b[0m \x1b[0;31m-3\x1b[0m (esc) \x1b[0;34;1;4mb.patch\x1b[0m: \x1b[0;33m+2\x1b[0m (esc) \x1b[0;30;1mc.patch\x1b[0m: \x1b[0;32munguarded\x1b[0m (esc) should pop b.patch $ hg qpop popping b.patch patch queue now empty list series $ hg qseries -v 0 G a.patch 1 U b.patch 2 U c.patch list guards $ hg qselect 1 2 3 should push b.patch $ hg qpush applying b.patch now at: b.patch $ hg qpush -a applying c.patch now at: c.patch $ hg qselect -n --reapply guards deactivated popping guarded patches popping c.patch popping b.patch patch queue now empty reapplying unguarded patches applying c.patch now at: c.patch guards in series file: +1 +2 -3 $ hg qselect -s +1 +2 -3 should show c.patch $ hg qapplied c.patch $ hg qrename a.patch new.patch should show : new.patch: +1 +2 -3 b.patch: +2 c.patch: unguarded $ hg qguard -l new.patch: +1 +2 -3 b.patch: +2 c.patch: unguarded $ hg qnew d.patch $ hg qpop popping d.patch now at: c.patch should show new.patch and b.patch as Guarded, c.patch as Applied and d.patch as Unapplied $ hg qseries -v 0 G new.patch 1 G b.patch 2 A c.patch 3 U d.patch qseries again, but with color $ hg --config extensions.color= --config color.mode=ansi qseries -v --color=always 0 G \x1b[0;30;1mnew.patch\x1b[0m (esc) 1 G \x1b[0;30;1mb.patch\x1b[0m (esc) 2 A \x1b[0;34;1;4mc.patch\x1b[0m (esc) 3 U \x1b[0;30;1md.patch\x1b[0m (esc) $ hg qguard d.patch +2 new.patch, b.patch: Guarded. c.patch: Applied. d.patch: Guarded. $ hg qseries -v 0 G new.patch 1 G b.patch 2 A c.patch 3 G d.patch $ qappunappv() > { > for command in qapplied "qapplied -v" qunapplied "qunapplied -v"; do > echo % hg $command > hg $command > done > } $ hg qpop -a popping c.patch patch queue now empty $ hg qguard -l new.patch: +1 +2 -3 b.patch: +2 c.patch: unguarded d.patch: +2 $ qappunappv % hg qapplied % hg qapplied -v % hg qunapplied c.patch % hg qunapplied -v 0 G new.patch 1 G b.patch 2 U c.patch 3 G d.patch $ hg qselect 1 number of unguarded, unapplied patches has changed from 1 to 2 $ qappunappv % hg qapplied % hg qapplied -v % hg qunapplied new.patch c.patch % hg qunapplied -v 0 U new.patch 1 G b.patch 2 U c.patch 3 G d.patch $ hg qpush -a applying new.patch skipping b.patch - guarded by '+2' applying c.patch skipping d.patch - guarded by '+2' now at: c.patch $ qappunappv % hg qapplied new.patch c.patch % hg qapplied -v 0 A new.patch 1 G b.patch 2 A c.patch % hg qunapplied % hg qunapplied -v 3 G d.patch $ hg qselect 2 number of unguarded, unapplied patches has changed from 0 to 1 number of guarded, applied patches has changed from 1 to 0 $ qappunappv % hg qapplied new.patch c.patch % hg qapplied -v 0 A new.patch 1 U b.patch 2 A c.patch % hg qunapplied d.patch % hg qunapplied -v 3 U d.patch $ for patch in `hg qseries`; do > echo % hg qapplied $patch > hg qapplied $patch > echo % hg qunapplied $patch > hg qunapplied $patch > done % hg qapplied new.patch new.patch % hg qunapplied new.patch b.patch d.patch % hg qapplied b.patch new.patch % hg qunapplied b.patch d.patch % hg qapplied c.patch new.patch c.patch % hg qunapplied c.patch d.patch % hg qapplied d.patch new.patch c.patch % hg qunapplied d.patch hg qseries -m: only b.patch should be shown the guards file was not ignored in the past $ hg qdelete -k b.patch $ hg qseries -m b.patch hg qseries -m with color $ hg --config extensions.color= --config color.mode=ansi qseries -m --color=always \x1b[0;31;1mb.patch\x1b[0m (esc) excercise corner cases in "qselect --reapply" $ hg qpop -a popping c.patch popping new.patch patch queue now empty $ hg qguard -- new.patch -not-new $ hg qguard -- c.patch -not-c $ hg qguard -- d.patch -not-d $ hg qpush -a applying new.patch applying c.patch applying d.patch patch d.patch is empty now at: d.patch $ hg qguard -l new.patch: -not-new c.patch: -not-c d.patch: -not-d $ hg qselect --reapply not-d popping guarded patches popping d.patch now at: c.patch reapplying unguarded patches cannot push 'd.patch' - guarded by '-not-d' $ hg qser -v 0 A new.patch 1 A c.patch 2 G d.patch $ hg qselect --reapply -n guards deactivated $ hg qpush applying d.patch patch d.patch is empty now at: d.patch $ hg qser -v 0 A new.patch 1 A c.patch 2 A d.patch $ hg qselect --reapply not-c popping guarded patches popping d.patch popping c.patch now at: new.patch reapplying unguarded patches applying d.patch patch d.patch is empty now at: d.patch $ hg qser -v 0 A new.patch 1 G c.patch 2 A d.patch $ hg qselect --reapply not-new popping guarded patches popping d.patch popping new.patch patch queue now empty reapplying unguarded patches applying c.patch applying d.patch patch d.patch is empty now at: d.patch $ hg qser -v 0 G new.patch 1 A c.patch 2 A d.patch