Mercurial > hg
view tests/test-mq-safety.t @ 22288:4e2559841d6c
largefiles: update largefiles even if rebase is aborted by conflict
Before this patch, largefiles in the working directory aren't updated
correctly, if rebase is aborted by conflict. This prevents users from
viewing appropriate largefiles while resolving conflicts.
While rebase, largefiles in the working directory are updated only at
successful committing in the special code path of
"lfilesrepo.commit()".
To update largefiles even if rebase is aborted by conflict, this patch
centralizes the logic of updating largefiles in the working directory
into the "mergeupdate" wrapping "merge.update".
This is a temporary way to fix with less changes. For fundamental
resolution of this kind of problems in the future, largefiles in the
working directory should be updated with other (normal) files
simultaneously while "merge.update" execution: maybe by hooking
"applyupdates".
"Action list based updating" introduced by hooking "applyupdates" will
also improve performance of updating, because it automatically
decreases target files to be checked.
Just after this patch, there are some improper things in "Case 0" code
path of "lfilesrepo.commit()":
- "updatelfiles" invocation is redundant for rebase
- detailed comment doesn't meet to rebase behavior
These will be resolved after the subsequent patch for transplant,
because this code path is shared with transplant.
Even though replacing "merge.update" in rebase extension by "hg.merge"
can also avoid this problem, this patch chooses centralizing the logic
into "mergeupdate", because:
- "merge.update" invocation in rebase extension can't be directly
replaced by "hg.merge", because:
- rebase requires some extra arguments, which "hg.merge" doesn't
take (e.g. "ancestor")
- rebase doesn't require statistics information forcibly displayed
in "hg.merge"
- introducing "mergeupdate" can resolve also problem of some other
code paths directly using "merge.update"
largefiles in the working directory aren't updated regardless of
the result of commands below, before this patch:
- backout (for revisions other than the parent revision of the
working directory without "--merge")
- graft
- histedit (for revisions other than the parent of the working
directory
When "partial" is specified, "merge.update" doesn't update dirstate
entries for standins, even though standins themselves are updated.
In this case, "normallookup" should be used to mark largefiles as
"possibly dirty" forcibly, because applying "normal" on lfdirstate
treats them as "clean" unexpectedly.
This is reason why "normallookup=partial" is specified for
"lfcommands.updatelfiles".
This patch doesn't test "hg rebase --continue", because it doesn't
work correctly if largefiles in the working directory are modified
manually while resolving conflicts. This will be fixed in the next
step of refactoring for largefiles.
All changes of tests/*.t files other than test-largefiles-update.t in
this patch come from invoking "updatelfiles" not after but before
statistics output of "hg.update", "hg.clean" and "hg.merge".
author | FUJIWARA Katsunori <foozy@lares.dti.ne.jp> |
---|---|
date | Sun, 24 Aug 2014 23:47:26 +0900 |
parents | aa9385f983fa |
children | d298805fb639 |
line wrap: on
line source
$ echo '[extensions]' >> $HGRCPATH $ echo 'hgext.mq =' >> $HGRCPATH $ hg init repo $ cd repo $ echo foo > foo $ hg ci -qAm 'add a file' $ hg qinit $ hg qnew foo $ echo foo >> foo $ hg qrefresh -m 'append foo' $ hg qnew bar $ echo bar >> foo $ hg qrefresh -m 'append bar' Try to operate on public mq changeset $ hg qpop popping bar now at: foo $ hg phase --public qbase $ echo babar >> foo $ hg qref abort: cannot refresh immutable revision (see "hg help phases" for details) [255] $ hg revert -a reverting foo $ hg qpop abort: popping would remove an immutable revision (see "hg help phases" for details) [255] $ hg qfold bar abort: cannot refresh immutable revision (see "hg help phases" for details) [255] $ hg revert -a reverting foo restore state for remaining test $ hg qpush applying bar now at: bar try to commit on top of a patch $ echo quux >> foo $ hg ci -m 'append quux' abort: cannot commit over an applied mq patch [255] cheat a bit... $ mv .hg/patches .hg/patches2 $ hg ci -m 'append quux' $ mv .hg/patches2 .hg/patches qpop/qrefresh on the wrong revision $ hg qpop abort: popping would remove a revision not managed by this patch queue [255] $ hg qpop -n patches using patch queue: $TESTTMP/repo/.hg/patches (glob) abort: popping would remove a revision not managed by this patch queue [255] $ hg qrefresh abort: working directory revision is not qtip [255] $ hg up -C qtip 1 files updated, 0 files merged, 0 files removed, 0 files unresolved $ hg qpop abort: popping would remove a revision not managed by this patch queue [255] $ hg qrefresh abort: cannot refresh a revision with children [255] $ hg tip --template '{rev} {desc}\n' 3 append quux qpush warning branchheads $ cd .. $ hg init branchy $ cd branchy $ echo q > q $ hg add q $ hg qnew -f qp $ hg qpop popping qp patch queue now empty $ echo a > a $ hg ci -Ama adding a $ hg up null 0 files updated, 0 files merged, 1 files removed, 0 files unresolved $ hg branch b marked working directory as branch b (branches are permanent and global, did you want a bookmark?) $ echo c > c $ hg ci -Amc adding c $ hg merge default 1 files updated, 0 files merged, 0 files removed, 0 files unresolved (branch merge, don't forget to commit) $ hg ci -mmerge $ hg up default 0 files updated, 0 files merged, 1 files removed, 0 files unresolved $ hg log changeset: 2:65309210bf4e branch: b tag: tip parent: 1:707adb4c8ae1 parent: 0:cb9a9f314b8b user: test date: Thu Jan 01 00:00:00 1970 +0000 summary: merge changeset: 1:707adb4c8ae1 branch: b parent: -1:000000000000 user: test date: Thu Jan 01 00:00:00 1970 +0000 summary: c changeset: 0:cb9a9f314b8b user: test date: Thu Jan 01 00:00:00 1970 +0000 summary: a $ hg qpush applying qp now at: qp Testing applied patches, push and --force $ cd .. $ hg init forcepush $ cd forcepush $ echo a > a $ hg ci -Am adda adding a $ echo a >> a $ hg ci -m changea $ hg up 0 1 files updated, 0 files merged, 0 files removed, 0 files unresolved $ hg branch branch marked working directory as branch branch (branches are permanent and global, did you want a bookmark?) $ echo b > b $ hg ci -Am addb adding b $ hg up 0 0 files updated, 0 files merged, 1 files removed, 0 files unresolved $ hg --cwd .. clone -r 0 forcepush forcepush2 adding changesets adding manifests adding file changes added 1 changesets with 1 changes to 1 files updating to branch default 1 files updated, 0 files merged, 0 files removed, 0 files unresolved $ echo a >> a $ hg qnew patch Pushing applied patch with --rev without --force $ hg push -r . ../forcepush2 pushing to ../forcepush2 abort: source has mq patches applied [255] Pushing applied patch with branchhash, without --force $ hg push ../forcepush2#default pushing to ../forcepush2 abort: source has mq patches applied [255] Pushing revs excluding applied patch $ hg push --new-branch -r 'branch(branch)' -r 2 ../forcepush2 pushing to ../forcepush2 searching for changes adding changesets adding manifests adding file changes added 1 changesets with 1 changes to 1 files Pushing applied patch with --force $ hg phase --force --secret 'mq()' $ hg push --force -r default ../forcepush2 pushing to ../forcepush2 searching for changes no changes found (ignored 1 secret changesets) [1] $ hg phase --draft 'mq()' $ hg push --force -r default ../forcepush2 pushing to ../forcepush2 searching for changes adding changesets adding manifests adding file changes added 1 changesets with 1 changes to 1 files (+1 heads) $ cd ..