view tests/test-parseindex2.py @ 22288:4e2559841d6c

largefiles: update largefiles even if rebase is aborted by conflict

Before this patch, largefiles in the working directory aren't updated
correctly, if rebase is aborted by conflict. This prevents users from
viewing appropriate largefiles while resolving conflicts.

While rebase, largefiles in the working directory are updated only at
successful committing in the special code path of
"lfilesrepo.commit()".

To update largefiles even if rebase is aborted by conflict, this patch
centralizes the logic of updating largefiles in the working directory
into the "mergeupdate" wrapping "merge.update".


This is a temporary way to fix with less changes. For fundamental
resolution of this kind of problems in the future, largefiles in the
working directory should be updated with other (normal) files
simultaneously while "merge.update" execution: maybe by hooking
"applyupdates".

"Action list based updating" introduced by hooking "applyupdates" will
also improve performance of updating, because it automatically
decreases target files to be checked.


Just after this patch, there are some improper things in "Case 0" code
path of "lfilesrepo.commit()":

  - "updatelfiles" invocation is redundant for rebase
  - detailed comment doesn't meet to rebase behavior

These will be resolved after the subsequent patch for transplant,
because this code path is shared with transplant.


Even though replacing "merge.update" in rebase extension by "hg.merge"
can also avoid this problem, this patch chooses centralizing the logic
into "mergeupdate", because:

  - "merge.update" invocation in rebase extension can't be directly
    replaced by "hg.merge", because:

    - rebase requires some extra arguments, which "hg.merge" doesn't
      take (e.g. "ancestor")

    - rebase doesn't require statistics information forcibly displayed
      in "hg.merge"

  - introducing "mergeupdate" can resolve also problem of some other
    code paths directly using "merge.update"

    largefiles in the working directory aren't updated regardless of
    the result of commands below, before this patch:

    - backout (for revisions other than the parent revision of the
      working directory without "--merge")

    - graft

    - histedit (for revisions other than the parent of the working
      directory


When "partial" is specified, "merge.update" doesn't update dirstate
entries for standins, even though standins themselves are updated.

In this case, "normallookup" should be used to mark largefiles as
"possibly dirty" forcibly, because applying "normal" on lfdirstate
treats them as "clean" unexpectedly.

This is reason why "normallookup=partial" is specified for
"lfcommands.updatelfiles".


This patch doesn't test "hg rebase --continue", because it doesn't
work correctly if largefiles in the working directory are modified
manually while resolving conflicts. This will be fixed in the next
step of refactoring for largefiles.

All changes of tests/*.t files other than test-largefiles-update.t in
this patch come from invoking "updatelfiles" not after but before
statistics output of "hg.update", "hg.clean" and "hg.merge".

"""This unit test primarily tests parsers.parse_index2().

It also checks certain aspects of the parsers module as a whole.
"""

from mercurial import parsers
from mercurial.node import nullid, nullrev
import struct
import subprocess
import sys

# original python implementation
def gettype(q):
    return int(q & 0xFFFF)

def offset_type(offset, type):
    return long(long(offset) << 16 | type)

indexformatng = ">Qiiiiii20s12x"

def py_parseindex(data, inline) :
    s = 64
    cache = None
    index = []
    nodemap =  {nullid: nullrev}
    n = off = 0

    l = len(data) - s
    append = index.append
    if inline:
        cache = (0, data)
        while off <= l:
            e = struct.unpack(indexformatng, data[off:off + s])
            nodemap[e[7]] = n
            append(e)
            n += 1
            if e[1] < 0:
                break
            off += e[1] + s
    else:
        while off <= l:
            e = struct.unpack(indexformatng, data[off:off + s])
            nodemap[e[7]] = n
            append(e)
            n += 1
            off += s

    e = list(index[0])
    type = gettype(e[0])
    e[0] = offset_type(0, type)
    index[0] = tuple(e)

    # add the magic null revision at -1
    index.append((0, 0, 0, -1, -1, -1, -1, nullid))

    return index, cache

data_inlined = '\x00\x01\x00\x01\x00\x00\x00\x00\x00\x00\x01\x8c' \
    '\x00\x00\x04\x07\x00\x00\x00\x00\x00\x00\x15\x15\xff\xff\xff' \
    '\xff\xff\xff\xff\xff\xebG\x97\xb7\x1fB\x04\xcf\x13V\x81\tw\x1b' \
    'w\xdduR\xda\xc6\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00' \
    'x\x9c\x9d\x93?O\xc30\x10\xc5\xf7|\x8a\xdb\x9a\xa8m\x06\xd8*\x95' \
    '\x81B\xa1\xa2\xa2R\xcb\x86Pd\x9a\x0b5$vd_\x04\xfd\xf6\x9c\xff@' \
    '\x11!\x0b\xd9\xec\xf7\xbbw\xe7gG6\xad6\x04\xdaN\xc0\x92\xa0$)' \
    '\xb1\x82\xa2\xd1%\x16\xa4\x8b7\xa9\xca\xd4-\xb2Y\x02\xfc\xc9' \
    '\xcaS\xf9\xaeX\xed\xb6\xd77Q\x02\x83\xd4\x19\xf5--Y\xea\xe1W' \
    '\xab\xed\x10\xceR\x0f_\xdf\xdf\r\xe1,\xf5\xf0\xcb\xf5 \xceR\x0f' \
    '_\xdc\x0e\x0e\xc3R\x0f_\xae\x96\x9b!\x9e\xa5\x1e\xbf\xdb,\x06' \
    '\xc7q\x9a/\x88\x82\xc3B\xea\xb5\xb4TJ\x93\xb6\x82\x0e\xe16\xe6' \
    'KQ\xdb\xaf\xecG\xa3\xd1 \x01\xd3\x0b_^\xe8\xaa\xa0\xae\xad\xd1' \
    '&\xbef\x1bz\x08\xb0|\xc9Xz\x06\xf6Z\x91\x90J\xaa\x17\x90\xaa' \
    '\xd2\xa6\x11$5C\xcf\xba#\xa0\x03\x02*2\x92-\xfc\xb1\x94\xdf\xe2' \
    '\xae\xb8\'m\x8ey0^\x85\xd3\x82\xb4\xf0`:\x9c\x00\x8a\xfd\x01' \
    '\xb0\xc6\x86\x8b\xdd\xae\x80\xf3\xa9\x9fd\x16\n\x00R%\x1a\x06' \
    '\xe9\xd8b\x98\x1d\xf4\xf3+\x9bf\x01\xd8p\x1b\xf3.\xed\x9f^g\xc3' \
    '^\xd9W81T\xdb\xd5\x04sx|\xf2\xeb\xd6`%?x\xed"\x831\xbf\xf3\xdc' \
    'b\xeb%gaY\xe1\xad\x9f\xb9f\'1w\xa9\xa5a\x83s\x82J\xb98\xbc4\x8b' \
    '\x83\x00\x9f$z\xb8#\xa5\xb1\xdf\x98\xd9\xec\x1b\x89O\xe3Ts\x9a4' \
    '\x17m\x8b\xfc\x8f\xa5\x95\x9a\xfc\xfa\xed,\xe5|\xa1\xfe\x15\xb9' \
    '\xbc\xb2\x93\x1f\xf2\x95\xff\xdf,\x1a\xc5\xe7\x17*\x93Oz:>\x0e'

data_non_inlined = '\x00\x00\x00\x01\x00\x00\x00\x00\x00\x01D\x19' \
    '\x00\x07e\x12\x00\x00\x00\x00\x00\x00\x00\x00\xff\xff\xff\xff' \
    '\xff\xff\xff\xff\xd1\xf4\xbb\xb0\xbe\xfc\x13\xbd\x8c\xd3\x9d' \
    '\x0f\xcd\xd9;\x8c\x07\x8cJ/\x00\x00\x00\x00\x00\x00\x00\x00\x00' \
    '\x00\x00\x00\x00\x00\x00\x01D\x19\x00\x00\x00\x00\x00\xdf\x00' \
    '\x00\x01q\x00\x00\x00\x01\x00\x00\x00\x01\x00\x00\x00\x00\xff' \
    '\xff\xff\xff\xc1\x12\xb9\x04\x96\xa4Z1t\x91\xdfsJ\x90\xf0\x9bh' \
    '\x07l&\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00' \
    '\x00\x01D\xf8\x00\x00\x00\x00\x01\x1b\x00\x00\x01\xb8\x00\x00' \
    '\x00\x01\x00\x00\x00\x02\x00\x00\x00\x01\xff\xff\xff\xff\x02\n' \
    '\x0e\xc6&\xa1\x92\xae6\x0b\x02i\xfe-\xe5\xbao\x05\xd1\xe7\x00' \
    '\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x01F' \
    '\x13\x00\x00\x00\x00\x01\xec\x00\x00\x03\x06\x00\x00\x00\x01' \
    '\x00\x00\x00\x03\x00\x00\x00\x02\xff\xff\xff\xff\x12\xcb\xeby1' \
    '\xb6\r\x98B\xcb\x07\xbd`\x8f\x92\xd9\xc4\x84\xbdK\x00\x00\x00' \
    '\x00\x00\x00\x00\x00\x00\x00\x00\x00'

def parse_index2(data, inline):
    index, chunkcache = parsers.parse_index2(data, inline)
    return list(index), chunkcache

def importparsers(hexversion):
    """Import mercurial.parsers with the given sys.hexversion."""
    # The file parsers.c inspects sys.hexversion to determine the version
    # of the currently-running Python interpreter, so we monkey-patch
    # sys.hexversion to simulate using different versions.
    code = ("import sys; sys.hexversion=%s; "
            "import mercurial.parsers" % hexversion)
    cmd = "python -c \"%s\"" % code
    # We need to do these tests inside a subprocess because parser.c's
    # version-checking code happens inside the module init function, and
    # when using reload() to reimport an extension module, "The init function
    # of extension modules is not called a second time"
    # (from http://docs.python.org/2/library/functions.html?#reload).
    p = subprocess.Popen(cmd, shell=True,
                         stdout=subprocess.PIPE, stderr=subprocess.STDOUT)
    return p.communicate()  # returns stdout, stderr

def printhexfail(testnumber, hexversion, stdout, expected):
    try:
        hexstring = hex(hexversion)
    except TypeError:
        hexstring = None
    print ("FAILED: version test #%s with Python %s and patched "
           "sys.hexversion %r (%r):\n Expected %s but got:\n-->'%s'\n" %
           (testnumber, sys.version_info, hexversion, hexstring, expected,
            stdout))

def testversionokay(testnumber, hexversion):
    stdout, stderr = importparsers(hexversion)
    if stdout:
        printhexfail(testnumber, hexversion, stdout, expected="no stdout")

def testversionfail(testnumber, hexversion):
    stdout, stderr = importparsers(hexversion)
    # We include versionerrortext to distinguish from other ImportErrors.
    errtext = "ImportError: %s" % parsers.versionerrortext
    if errtext not in stdout:
        printhexfail(testnumber, hexversion, stdout,
                     expected="stdout to contain %r" % errtext)

def makehex(major, minor, micro):
    return int("%x%02x%02x00" % (major, minor, micro), 16)

def runversiontests():
    """Check the version-detection logic when importing parsers."""
    info = sys.version_info
    major, minor, micro = info[0], info[1], info[2]
    # Test same major-minor versions.
    testversionokay(1, makehex(major, minor, micro))
    testversionokay(2, makehex(major, minor, micro + 1))
    # Test different major-minor versions.
    testversionfail(3, makehex(major + 1, minor, micro))
    testversionfail(4, makehex(major, minor + 1, micro))
    testversionfail(5, "'foo'")

def runtest() :
    # Only test the version-detection logic if it is present.
    try:
        parsers.versionerrortext
    except AttributeError:
        pass
    else:
        runversiontests()

    # Check that parse_index2() raises TypeError on bad arguments.
    try:
        parse_index2(0, True)
    except TypeError:
        pass
    else:
        print "Expected to get TypeError."

   # Check parsers.parse_index2() on an index file against the original
   # Python implementation of parseindex, both with and without inlined data.

    py_res_1 = py_parseindex(data_inlined, True)
    c_res_1 = parse_index2(data_inlined, True)

    py_res_2 = py_parseindex(data_non_inlined, False)
    c_res_2 = parse_index2(data_non_inlined, False)

    if py_res_1 != c_res_1:
        print "Parse index result (with inlined data) differs!"

    if py_res_2 != c_res_2:
        print "Parse index result (no inlined data) differs!"

    ix = parsers.parse_index2(data_inlined, True)[0]
    for i, r in enumerate(ix):
        if r[7] == nullid:
            i = -1
        try:
            if ix[r[7]] != i:
                print 'Reverse lookup inconsistent for %r' % r[7].encode('hex')
        except TypeError:
            # pure version doesn't support this
            break

    print "done"

runtest()