Mercurial > hg
view tests/test-treediscovery.t @ 22288:4e2559841d6c
largefiles: update largefiles even if rebase is aborted by conflict
Before this patch, largefiles in the working directory aren't updated
correctly, if rebase is aborted by conflict. This prevents users from
viewing appropriate largefiles while resolving conflicts.
While rebase, largefiles in the working directory are updated only at
successful committing in the special code path of
"lfilesrepo.commit()".
To update largefiles even if rebase is aborted by conflict, this patch
centralizes the logic of updating largefiles in the working directory
into the "mergeupdate" wrapping "merge.update".
This is a temporary way to fix with less changes. For fundamental
resolution of this kind of problems in the future, largefiles in the
working directory should be updated with other (normal) files
simultaneously while "merge.update" execution: maybe by hooking
"applyupdates".
"Action list based updating" introduced by hooking "applyupdates" will
also improve performance of updating, because it automatically
decreases target files to be checked.
Just after this patch, there are some improper things in "Case 0" code
path of "lfilesrepo.commit()":
- "updatelfiles" invocation is redundant for rebase
- detailed comment doesn't meet to rebase behavior
These will be resolved after the subsequent patch for transplant,
because this code path is shared with transplant.
Even though replacing "merge.update" in rebase extension by "hg.merge"
can also avoid this problem, this patch chooses centralizing the logic
into "mergeupdate", because:
- "merge.update" invocation in rebase extension can't be directly
replaced by "hg.merge", because:
- rebase requires some extra arguments, which "hg.merge" doesn't
take (e.g. "ancestor")
- rebase doesn't require statistics information forcibly displayed
in "hg.merge"
- introducing "mergeupdate" can resolve also problem of some other
code paths directly using "merge.update"
largefiles in the working directory aren't updated regardless of
the result of commands below, before this patch:
- backout (for revisions other than the parent revision of the
working directory without "--merge")
- graft
- histedit (for revisions other than the parent of the working
directory
When "partial" is specified, "merge.update" doesn't update dirstate
entries for standins, even though standins themselves are updated.
In this case, "normallookup" should be used to mark largefiles as
"possibly dirty" forcibly, because applying "normal" on lfdirstate
treats them as "clean" unexpectedly.
This is reason why "normallookup=partial" is specified for
"lfcommands.updatelfiles".
This patch doesn't test "hg rebase --continue", because it doesn't
work correctly if largefiles in the working directory are modified
manually while resolving conflicts. This will be fixed in the next
step of refactoring for largefiles.
All changes of tests/*.t files other than test-largefiles-update.t in
this patch come from invoking "updatelfiles" not after but before
statistics output of "hg.update", "hg.clean" and "hg.merge".
author | FUJIWARA Katsunori <foozy@lares.dti.ne.jp> |
---|---|
date | Sun, 24 Aug 2014 23:47:26 +0900 |
parents | 0688010ee38f |
children | 6e431e1635b6 |
line wrap: on
line source
#require killdaemons Tests discovery against servers without getbundle support: $ CAP=getbundle $ . "$TESTDIR/notcapable" $ cat >> $HGRCPATH <<EOF > [ui] > logtemplate="{rev} {node|short}: {desc} {branches}\n" > EOF Setup HTTP server control: $ remote=http://localhost:$HGPORT/ $ export remote $ tstart() { > echo '[web]' > $1/.hg/hgrc > echo 'push_ssl = false' >> $1/.hg/hgrc > echo 'allow_push = *' >> $1/.hg/hgrc > hg serve -R $1 -p $HGPORT -d --pid-file=hg.pid -A access.log -E errors.log > cat hg.pid >> $DAEMON_PIDS > } $ tstop() { > "$TESTDIR/killdaemons.py" $DAEMON_PIDS > [ "$1" ] && cut -d' ' -f6- access.log && cat errors.log > rm access.log errors.log > } Both are empty: $ hg init empty1 $ hg init empty2 $ tstart empty2 $ hg incoming -R empty1 $remote comparing with http://localhost:$HGPORT/ no changes found [1] $ hg outgoing -R empty1 $remote comparing with http://localhost:$HGPORT/ no changes found [1] $ hg pull -R empty1 $remote pulling from http://localhost:$HGPORT/ no changes found $ hg push -R empty1 $remote pushing to http://localhost:$HGPORT/ no changes found [1] $ tstop Base repo: $ hg init main $ cd main $ hg debugbuilddag -mo '+2:tbase @name1 +3:thead1 <tbase @name2 +4:thead2 @both /thead1 +2:tmaintip' $ hg log -G o 11 a19bfa7e7328: r11 both | o 10 8b6bad1512e1: r10 both | o 9 025829e08038: r9 both |\ | o 8 d8f638ac69e9: r8 name2 | | | o 7 b6b4d315a2ac: r7 name2 | | | o 6 6c6f5d5f3c11: r6 name2 | | | o 5 70314b29987d: r5 name2 | | o | 4 e71dbbc70e03: r4 name1 | | o | 3 2c8d5d5ec612: r3 name1 | | o | 2 a7892891da29: r2 name1 |/ o 1 0019a3b924fd: r1 | o 0 d57206cc072a: r0 $ cd .. $ tstart main Full clone: $ hg clone main full updating to branch default 2 files updated, 0 files merged, 0 files removed, 0 files unresolved $ cd full $ hg incoming $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ hg outgoing $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ hg pull $remote pulling from http://localhost:$HGPORT/ searching for changes no changes found $ hg push $remote pushing to http://localhost:$HGPORT/ searching for changes no changes found [1] $ cd .. Local is empty: $ cd empty1 $ hg incoming $remote comparing with http://localhost:$HGPORT/ 0 d57206cc072a: r0 1 0019a3b924fd: r1 2 a7892891da29: r2 name1 3 2c8d5d5ec612: r3 name1 4 e71dbbc70e03: r4 name1 5 70314b29987d: r5 name2 6 6c6f5d5f3c11: r6 name2 7 b6b4d315a2ac: r7 name2 8 d8f638ac69e9: r8 name2 9 025829e08038: r9 both 10 8b6bad1512e1: r10 both 11 a19bfa7e7328: r11 both $ hg outgoing $remote comparing with http://localhost:$HGPORT/ no changes found [1] $ hg push $remote pushing to http://localhost:$HGPORT/ no changes found [1] $ hg pull $remote pulling from http://localhost:$HGPORT/ requesting all changes adding changesets adding manifests adding file changes added 12 changesets with 24 changes to 2 files (run 'hg update' to get a working copy) $ hg incoming $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ cd .. Local is subset: $ hg clone main subset --rev name2 ; cd subset adding changesets adding manifests adding file changes added 6 changesets with 12 changes to 2 files updating to branch name2 2 files updated, 0 files merged, 0 files removed, 0 files unresolved $ hg incoming $remote comparing with http://localhost:$HGPORT/ searching for changes 6 a7892891da29: r2 name1 7 2c8d5d5ec612: r3 name1 8 e71dbbc70e03: r4 name1 9 025829e08038: r9 both 10 8b6bad1512e1: r10 both 11 a19bfa7e7328: r11 both $ hg outgoing $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ hg push $remote pushing to http://localhost:$HGPORT/ searching for changes no changes found [1] $ hg pull $remote pulling from http://localhost:$HGPORT/ searching for changes adding changesets adding manifests adding file changes added 6 changesets with 12 changes to 2 files (run 'hg update' to get a working copy) $ hg incoming $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ cd .. $ tstop Remote is empty: $ tstart empty2 $ cd main $ hg incoming $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ hg outgoing $remote comparing with http://localhost:$HGPORT/ searching for changes 0 d57206cc072a: r0 1 0019a3b924fd: r1 2 a7892891da29: r2 name1 3 2c8d5d5ec612: r3 name1 4 e71dbbc70e03: r4 name1 5 70314b29987d: r5 name2 6 6c6f5d5f3c11: r6 name2 7 b6b4d315a2ac: r7 name2 8 d8f638ac69e9: r8 name2 9 025829e08038: r9 both 10 8b6bad1512e1: r10 both 11 a19bfa7e7328: r11 both $ hg pull $remote pulling from http://localhost:$HGPORT/ searching for changes no changes found $ hg push $remote pushing to http://localhost:$HGPORT/ searching for changes remote: adding changesets remote: adding manifests remote: adding file changes remote: added 12 changesets with 24 changes to 2 files $ hg outgoing $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ cd .. $ tstop Local is superset: $ hg clone main subset2 --rev name2 adding changesets adding manifests adding file changes added 6 changesets with 12 changes to 2 files updating to branch name2 2 files updated, 0 files merged, 0 files removed, 0 files unresolved $ tstart subset2 $ cd main $ hg incoming $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ hg outgoing $remote comparing with http://localhost:$HGPORT/ searching for changes 2 a7892891da29: r2 name1 3 2c8d5d5ec612: r3 name1 4 e71dbbc70e03: r4 name1 9 025829e08038: r9 both 10 8b6bad1512e1: r10 both 11 a19bfa7e7328: r11 both $ hg pull $remote pulling from http://localhost:$HGPORT/ searching for changes no changes found $ hg push $remote pushing to http://localhost:$HGPORT/ searching for changes abort: push creates new remote branches: both, name1! (use 'hg push --new-branch' to create new remote branches) [255] $ hg push $remote --new-branch pushing to http://localhost:$HGPORT/ searching for changes remote: adding changesets remote: adding manifests remote: adding file changes remote: added 6 changesets with 12 changes to 2 files $ hg outgoing $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ cd .. $ tstop Partial pull: $ tstart main $ hg clone $remote partial --rev name2 adding changesets adding manifests adding file changes added 6 changesets with 12 changes to 2 files updating to branch name2 2 files updated, 0 files merged, 0 files removed, 0 files unresolved $ cd partial $ hg incoming $remote comparing with http://localhost:$HGPORT/ searching for changes 6 a7892891da29: r2 name1 7 2c8d5d5ec612: r3 name1 8 e71dbbc70e03: r4 name1 9 025829e08038: r9 both 10 8b6bad1512e1: r10 both 11 a19bfa7e7328: r11 both $ hg incoming $remote --rev name1 comparing with http://localhost:$HGPORT/ searching for changes 6 a7892891da29: r2 name1 7 2c8d5d5ec612: r3 name1 8 e71dbbc70e03: r4 name1 $ hg pull $remote --rev name1 pulling from http://localhost:$HGPORT/ searching for changes adding changesets adding manifests adding file changes added 3 changesets with 6 changes to 2 files (+1 heads) (run 'hg heads' to see heads) $ hg incoming $remote comparing with http://localhost:$HGPORT/ searching for changes 9 025829e08038: r9 both 10 8b6bad1512e1: r10 both 11 a19bfa7e7328: r11 both $ cd .. $ tstop Both have new stuff in new named branches: $ hg clone main repo1a --rev name1 -q $ hg clone repo1a repo1b -q $ hg clone main repo2a --rev name2 -q $ hg clone repo2a repo2b -q $ tstart repo1a $ cd repo2a $ hg incoming $remote comparing with http://localhost:$HGPORT/ searching for changes 6 a7892891da29: r2 name1 7 2c8d5d5ec612: r3 name1 8 e71dbbc70e03: r4 name1 $ hg outgoing $remote comparing with http://localhost:$HGPORT/ searching for changes 2 70314b29987d: r5 name2 3 6c6f5d5f3c11: r6 name2 4 b6b4d315a2ac: r7 name2 5 d8f638ac69e9: r8 name2 $ hg push $remote --new-branch pushing to http://localhost:$HGPORT/ searching for changes remote: adding changesets remote: adding manifests remote: adding file changes remote: added 4 changesets with 8 changes to 2 files (+1 heads) $ hg pull $remote pulling from http://localhost:$HGPORT/ searching for changes adding changesets adding manifests adding file changes added 3 changesets with 6 changes to 2 files (+1 heads) (run 'hg heads' to see heads) $ hg incoming $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ hg outgoing $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ cd .. $ tstop $ tstart repo1b $ cd repo2b $ hg incoming $remote comparing with http://localhost:$HGPORT/ searching for changes 6 a7892891da29: r2 name1 7 2c8d5d5ec612: r3 name1 8 e71dbbc70e03: r4 name1 $ hg outgoing $remote comparing with http://localhost:$HGPORT/ searching for changes 2 70314b29987d: r5 name2 3 6c6f5d5f3c11: r6 name2 4 b6b4d315a2ac: r7 name2 5 d8f638ac69e9: r8 name2 $ hg pull $remote pulling from http://localhost:$HGPORT/ searching for changes adding changesets adding manifests adding file changes added 3 changesets with 6 changes to 2 files (+1 heads) (run 'hg heads' to see heads) $ hg push $remote --new-branch pushing to http://localhost:$HGPORT/ searching for changes remote: adding changesets remote: adding manifests remote: adding file changes remote: added 4 changesets with 8 changes to 2 files (+1 heads) $ hg incoming $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ hg outgoing $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ cd .. $ tstop Both have new stuff in existing named branches: $ rm -r repo1a repo1b repo2a repo2b $ hg clone main repo1a --rev 3 --rev 8 -q $ hg clone repo1a repo1b -q $ hg clone main repo2a --rev 4 --rev 7 -q $ hg clone repo2a repo2b -q $ tstart repo1a $ cd repo2a $ hg incoming $remote comparing with http://localhost:$HGPORT/ searching for changes 8 d8f638ac69e9: r8 name2 $ hg outgoing $remote comparing with http://localhost:$HGPORT/ searching for changes 4 e71dbbc70e03: r4 name1 $ hg push $remote --new-branch pushing to http://localhost:$HGPORT/ searching for changes remote: adding changesets remote: adding manifests remote: adding file changes remote: added 1 changesets with 2 changes to 2 files $ hg pull $remote pulling from http://localhost:$HGPORT/ searching for changes adding changesets adding manifests adding file changes added 1 changesets with 2 changes to 2 files (run 'hg update' to get a working copy) $ hg incoming $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ hg outgoing $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ cd .. $ tstop $ tstart repo1b $ cd repo2b $ hg incoming $remote comparing with http://localhost:$HGPORT/ searching for changes 8 d8f638ac69e9: r8 name2 $ hg outgoing $remote comparing with http://localhost:$HGPORT/ searching for changes 4 e71dbbc70e03: r4 name1 $ hg pull $remote pulling from http://localhost:$HGPORT/ searching for changes adding changesets adding manifests adding file changes added 1 changesets with 2 changes to 2 files (run 'hg update' to get a working copy) $ hg push $remote --new-branch pushing to http://localhost:$HGPORT/ searching for changes remote: adding changesets remote: adding manifests remote: adding file changes remote: added 1 changesets with 2 changes to 2 files $ hg incoming $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ hg outgoing $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ cd .. $ tstop show "GET /?cmd=capabilities HTTP/1.1" 200 - "GET /?cmd=heads HTTP/1.1" 200 - "GET /?cmd=branches HTTP/1.1" 200 - x-hgarg-1:nodes=d8f638ac69e9ae8dea4f09f11d696546a912d961 "GET /?cmd=between HTTP/1.1" 200 - x-hgarg-1:pairs=d8f638ac69e9ae8dea4f09f11d696546a912d961-d57206cc072a18317c1e381fb60aa31bd3401785 "GET /?cmd=changegroupsubset HTTP/1.1" 200 - x-hgarg-1:bases=d8f638ac69e9ae8dea4f09f11d696546a912d961&heads=d8f638ac69e9ae8dea4f09f11d696546a912d961 "GET /?cmd=capabilities HTTP/1.1" 200 - "GET /?cmd=heads HTTP/1.1" 200 - "GET /?cmd=branches HTTP/1.1" 200 - x-hgarg-1:nodes=d8f638ac69e9ae8dea4f09f11d696546a912d961 "GET /?cmd=between HTTP/1.1" 200 - x-hgarg-1:pairs=d8f638ac69e9ae8dea4f09f11d696546a912d961-d57206cc072a18317c1e381fb60aa31bd3401785 "GET /?cmd=capabilities HTTP/1.1" 200 - "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks "GET /?cmd=heads HTTP/1.1" 200 - "GET /?cmd=branches HTTP/1.1" 200 - x-hgarg-1:nodes=d8f638ac69e9ae8dea4f09f11d696546a912d961 "GET /?cmd=between HTTP/1.1" 200 - x-hgarg-1:pairs=d8f638ac69e9ae8dea4f09f11d696546a912d961-d57206cc072a18317c1e381fb60aa31bd3401785 "GET /?cmd=changegroupsubset HTTP/1.1" 200 - x-hgarg-1:bases=d8f638ac69e9ae8dea4f09f11d696546a912d961&heads=d8f638ac69e9ae8dea4f09f11d696546a912d961+2c8d5d5ec612be65cdfdeac78b7662ab1696324a "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases "GET /?cmd=capabilities HTTP/1.1" 200 - "GET /?cmd=heads HTTP/1.1" 200 - "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks "GET /?cmd=branchmap HTTP/1.1" 200 - "GET /?cmd=branchmap HTTP/1.1" 200 - "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks "POST /?cmd=unbundle HTTP/1.1" 200 - x-hgarg-1:heads=686173686564+1827a5bb63e602382eb89dd58f2ac9f3b007ad91 "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases "GET /?cmd=capabilities HTTP/1.1" 200 - "GET /?cmd=heads HTTP/1.1" 200 - "GET /?cmd=capabilities HTTP/1.1" 200 - "GET /?cmd=heads HTTP/1.1" 200 -