view tests/test-update-branches.t @ 22288:4e2559841d6c

largefiles: update largefiles even if rebase is aborted by conflict

Before this patch, largefiles in the working directory aren't updated
correctly, if rebase is aborted by conflict. This prevents users from
viewing appropriate largefiles while resolving conflicts.

While rebase, largefiles in the working directory are updated only at
successful committing in the special code path of
"lfilesrepo.commit()".

To update largefiles even if rebase is aborted by conflict, this patch
centralizes the logic of updating largefiles in the working directory
into the "mergeupdate" wrapping "merge.update".


This is a temporary way to fix with less changes. For fundamental
resolution of this kind of problems in the future, largefiles in the
working directory should be updated with other (normal) files
simultaneously while "merge.update" execution: maybe by hooking
"applyupdates".

"Action list based updating" introduced by hooking "applyupdates" will
also improve performance of updating, because it automatically
decreases target files to be checked.


Just after this patch, there are some improper things in "Case 0" code
path of "lfilesrepo.commit()":

  - "updatelfiles" invocation is redundant for rebase
  - detailed comment doesn't meet to rebase behavior

These will be resolved after the subsequent patch for transplant,
because this code path is shared with transplant.


Even though replacing "merge.update" in rebase extension by "hg.merge"
can also avoid this problem, this patch chooses centralizing the logic
into "mergeupdate", because:

  - "merge.update" invocation in rebase extension can't be directly
    replaced by "hg.merge", because:

    - rebase requires some extra arguments, which "hg.merge" doesn't
      take (e.g. "ancestor")

    - rebase doesn't require statistics information forcibly displayed
      in "hg.merge"

  - introducing "mergeupdate" can resolve also problem of some other
    code paths directly using "merge.update"

    largefiles in the working directory aren't updated regardless of
    the result of commands below, before this patch:

    - backout (for revisions other than the parent revision of the
      working directory without "--merge")

    - graft

    - histedit (for revisions other than the parent of the working
      directory


When "partial" is specified, "merge.update" doesn't update dirstate
entries for standins, even though standins themselves are updated.

In this case, "normallookup" should be used to mark largefiles as
"possibly dirty" forcibly, because applying "normal" on lfdirstate
treats them as "clean" unexpectedly.

This is reason why "normallookup=partial" is specified for
"lfcommands.updatelfiles".


This patch doesn't test "hg rebase --continue", because it doesn't
work correctly if largefiles in the working directory are modified
manually while resolving conflicts. This will be fixed in the next
step of refactoring for largefiles.

All changes of tests/*.t files other than test-largefiles-update.t in
this patch come from invoking "updatelfiles" not after but before
statistics output of "hg.update", "hg.clean" and "hg.merge".

# Construct the following history tree:
#
# @  5:e1bb631146ca  b1
# |
# o  4:a4fdb3b883c4 0:b608b9236435  b1
# |
# | o  3:4b57d2520816 1:44592833ba9f
# | |
# | | o  2:063f31070f65
# | |/
# | o  1:44592833ba9f
# |/
# o  0:b608b9236435

  $ mkdir b1
  $ cd b1
  $ hg init
  $ echo foo > foo
  $ echo zero > a
  $ hg init sub
  $ echo suba > sub/suba
  $ hg --cwd sub ci -Am addsuba
  adding suba
  $ echo 'sub = sub' > .hgsub
  $ hg ci -qAm0
  $ echo one > a ; hg ci -m1
  $ echo two > a ; hg ci -m2
  $ hg up -q 1
  $ echo three > a ; hg ci -qm3
  $ hg up -q 0
  $ hg branch -q b1
  $ echo four > a ; hg ci -qm4
  $ echo five > a ; hg ci -qm5

Initial repo state:

  $ hg log -G --template '{rev}:{node|short} {parents} {branches}\n'
  @  5:ff252e8273df  b1
  |
  o  4:d047485b3896 0:60829823a42a  b1
  |
  | o  3:6efa171f091b 1:0786582aa4b1
  | |
  | | o  2:bd10386d478c
  | |/
  | o  1:0786582aa4b1
  |/
  o  0:60829823a42a
  

Make sure update doesn't assume b1 is a repository if invoked from outside:

  $ cd ..
  $ hg update b1
  abort: no repository found in '$TESTTMP' (.hg not found)!
  [255]
  $ cd b1

Test helper functions:

  $ revtest () {
  >     msg=$1
  >     dirtyflag=$2   # 'clean', 'dirty' or 'dirtysub'
  >     startrev=$3
  >     targetrev=$4
  >     opt=$5
  >     hg up -qC $startrev
  >     test $dirtyflag = dirty && echo dirty > foo
  >     test $dirtyflag = dirtysub && echo dirty > sub/suba
  >     hg up $opt $targetrev
  >     hg parent --template 'parent={rev}\n'
  >     hg stat -S
  > }

  $ norevtest () {
  >     msg=$1
  >     dirtyflag=$2   # 'clean', 'dirty' or 'dirtysub'
  >     startrev=$3
  >     opt=$4
  >     hg up -qC $startrev
  >     test $dirtyflag = dirty && echo dirty > foo
  >     test $dirtyflag = dirtysub && echo dirty > sub/suba
  >     hg up $opt
  >     hg parent --template 'parent={rev}\n'
  >     hg stat -S
  > }

Test cases are documented in a table in the update function of merge.py.
Cases are run as shown in that table, row by row.

  $ norevtest 'none clean linear' clean 4
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  parent=5

  $ norevtest 'none clean same'   clean 2
  abort: not a linear update
  (merge or update --check to force update)
  parent=2


  $ revtest 'none clean linear' clean 1 2
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  parent=2

  $ revtest 'none clean same'   clean 2 3
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  parent=3

  $ revtest 'none clean cross'  clean 3 4
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  parent=4


  $ revtest 'none dirty linear' dirty 1 2
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  parent=2
  M foo

  $ revtest 'none dirtysub linear' dirtysub 1 2
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  parent=2
  M sub/suba

  $ revtest 'none dirty same'   dirty 2 3
  abort: uncommitted changes
  (commit or update --clean to discard changes)
  parent=2
  M foo

  $ revtest 'none dirtysub same'   dirtysub 2 3
  abort: uncommitted changes
  (commit or update --clean to discard changes)
  parent=2
  M sub/suba

  $ revtest 'none dirty cross'  dirty 3 4
  abort: uncommitted changes
  (commit or update --clean to discard changes)
  parent=3
  M foo

  $ norevtest 'none dirty cross'  dirty 2
  abort: uncommitted changes
  (commit and merge, or update --clean to discard changes)
  parent=2
  M foo

  $ revtest 'none dirtysub cross'  dirtysub 3 4
  abort: uncommitted changes
  (commit or update --clean to discard changes)
  parent=3
  M sub/suba

  $ revtest '-C dirty linear'   dirty 1 2 -C
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  parent=2

  $ revtest '-c dirty linear'   dirty 1 2 -c
  abort: uncommitted changes
  parent=1
  M foo

  $ revtest '-c dirtysub linear'   dirtysub 1 2 -c
  abort: uncommitted changes
  parent=1
  M sub/suba

  $ norevtest '-c clean same'   clean 2 -c
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  parent=3

  $ revtest '-cC dirty linear'  dirty 1 2 -cC
  abort: cannot specify both -c/--check and -C/--clean
  parent=1
  M foo

Test obsolescence behavior
---------------------------------------------------------------------

successors should be taken in account when checking head destination

  $ cat << EOF >> $HGRCPATH
  > [extensions]
  > obs=$TESTTMP/obs.py
  > [ui]
  > logtemplate={rev}:{node|short} {desc|firstline}
  > EOF
  $ cat > $TESTTMP/obs.py << EOF
  > import mercurial.obsolete
  > mercurial.obsolete._enabled = True
  > EOF

Test no-argument update to a successor of an obsoleted changeset

  $ hg log -G
  o  5:ff252e8273df 5
  |
  o  4:d047485b3896 4
  |
  | o  3:6efa171f091b 3
  | |
  | | o  2:bd10386d478c 2
  | |/
  | @  1:0786582aa4b1 1
  |/
  o  0:60829823a42a 0
  
  $ hg book bm -r 3
  $ hg status
  M foo

We add simple obsolescence marker between 3 and 4 (indirect successors)

  $ hg id --debug -i -r 3
  6efa171f091b00a3c35edc15d48c52a498929953
  $ hg id --debug -i -r 4
  d047485b3896813b2a624e86201983520f003206
  $ hg debugobsolete 6efa171f091b00a3c35edc15d48c52a498929953 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
  $ hg debugobsolete aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa d047485b3896813b2a624e86201983520f003206

Test that 5 is detected as a valid destination from 3 and also accepts moving
the bookmark (issue4015)

  $ hg up --quiet --hidden 3
  $ hg up 5
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg book bm
  moving bookmark 'bm' forward from 6efa171f091b
  $ hg bookmarks
   * bm                        5:ff252e8273df

Test that 4 is detected as the no-argument destination from 3 and also moves
the bookmark with it
  $ hg up --quiet 0          # we should be able to update to 3 directly
  $ hg up --quiet --hidden 3 # but not implemented yet.
  $ hg book -f bm
  $ hg up
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  updating bookmark bm
  $ hg book
   * bm                        4:d047485b3896

Test that 5 is detected as a valid destination from 1
  $ hg up --quiet 0          # we should be able to update to 3 directly
  $ hg up --quiet --hidden 3 # but not implemented yet.
  $ hg up 5
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

Test that 5 is not detected as a valid destination from 2
  $ hg up --quiet 0
  $ hg up --quiet 2
  $ hg up 5
  abort: uncommitted changes
  (commit or update --clean to discard changes)
  [255]

Test that we don't crash when updating from a pruned changeset (i.e. has no
successors). Behavior should probably be that we update to the first
non-obsolete parent but that will be decided later.
  $ hg id --debug -r 2
  bd10386d478cd5a9faf2e604114c8e6da62d3889
  $ hg up --quiet 0
  $ hg up --quiet 2
  $ hg debugobsolete bd10386d478cd5a9faf2e604114c8e6da62d3889
  $ hg up
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved