view hgext/fetch.py @ 45217:4e5da64d5549

tests: make check-py3-compat.py actually load the specified files correctly

For most uses, this change is essentially a no-op, as this script is generally
only run by test-check-py3-compat.t, which will already put `$TESTDIR/..` in
`$PYTHONPATH`.

When running outside of tests, however, `$PYTHONPATH` is likely not set, causing
check-py3-compat.py to parse the file from the repo, but then import the
installed version, and raise any errors about the installed version, not the one
currently in the repo.

Additionally, this helps users (like me) who have a strange set up where their
home directory (and thus their hg repos) happen to be in a subdirectory of
sys.prefix (which is /usr on my system). Since the '.' entry added to sys.path
takes precedence over the absolute path of `$TESTDIR/..` in `$PYTHONPATH`, the
path to the modules that it imports (and that show up in any stack trace) are
*relative*, meaning that we don't detect them as starting with `sys.prefix`.

Sample non-test invocation, and the difference this change makes (the path for
'error at <path>:<line>' is correct now)::

Before:
```
$ python3 contrib/check-py3-compat.py mercurial/win*.py
mercurial/win32.py: error importing: <ValueError> _type_ 'v' not supported (error at check-py3-compat.py:65)
mercurial/windows.py: error importing: <ModuleNotFoundError> No module named 'msvcrt' (error at check-py3-compat.py:65)
```

After:
```
$ python3 contrib/check-py3-compat.py mercurial/win*.py
mercurial/win32.py: error importing: <ValueError> _type_ 'v' not supported (error at win32.py:11)
mercurial/windows.py: error importing: <ModuleNotFoundError> No module named 'msvcrt' (error at windows.py:12)
```

Differential Revision: https://phab.mercurial-scm.org/D8814

# fetch.py - pull and merge remote changes
#
# Copyright 2006 Vadim Gelfer <[e-mail]>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.

'''pull, update and merge in one command (DEPRECATED)'''

from __future__ import absolute_import

from mercurial.i18n import _
from mercurial.node import short
from mercurial import (
    cmdutil,
    error,
    exchange,
    hg,
    lock,
    pycompat,
    registrar,
    util,
)
from mercurial.utils import dateutil

release = lock.release
cmdtable = {}
command = registrar.command(cmdtable)
# Note for extension authors: ONLY specify testedwith = 'ships-with-hg-core' for
# extensions which SHIP WITH MERCURIAL. Non-mainline extensions should
# be specifying the version(s) of Mercurial they are tested with, or
# leave the attribute unspecified.
testedwith = b'ships-with-hg-core'


@command(
    b'fetch',
    [
        (
            b'r',
            b'rev',
            [],
            _(b'a specific revision you would like to pull'),
            _(b'REV'),
        ),
        (b'', b'edit', None, _(b'invoke editor on commit messages')),
        (b'', b'force-editor', None, _(b'edit commit message (DEPRECATED)')),
        (b'', b'switch-parent', None, _(b'switch parents when merging')),
    ]
    + cmdutil.commitopts
    + cmdutil.commitopts2
    + cmdutil.remoteopts,
    _(b'hg fetch [SOURCE]'),
    helpcategory=command.CATEGORY_REMOTE_REPO_MANAGEMENT,
)
def fetch(ui, repo, source=b'default', **opts):
    '''pull changes from a remote repository, merge new changes if needed.

    This finds all changes from the repository at the specified path
    or URL and adds them to the local repository.

    If the pulled changes add a new branch head, the head is
    automatically merged, and the result of the merge is committed.
    Otherwise, the working directory is updated to include the new
    changes.

    When a merge is needed, the working directory is first updated to
    the newly pulled changes. Local changes are then merged into the
    pulled changes. To switch the merge order, use --switch-parent.

    See :hg:`help dates` for a list of formats valid for -d/--date.

    Returns 0 on success.
    '''

    opts = pycompat.byteskwargs(opts)
    date = opts.get(b'date')
    if date:
        opts[b'date'] = dateutil.parsedate(date)

    parent = repo.dirstate.p1()
    branch = repo.dirstate.branch()
    try:
        branchnode = repo.branchtip(branch)
    except error.RepoLookupError:
        branchnode = None
    if parent != branchnode:
        raise error.Abort(
            _(b'working directory not at branch tip'),
            hint=_(b"use 'hg update' to check out branch tip"),
        )

    wlock = lock = None
    try:
        wlock = repo.wlock()
        lock = repo.lock()

        cmdutil.bailifchanged(repo)

        bheads = repo.branchheads(branch)
        bheads = [head for head in bheads if len(repo[head].children()) == 0]
        if len(bheads) > 1:
            raise error.Abort(
                _(
                    b'multiple heads in this branch '
                    b'(use "hg heads ." and "hg merge" to merge)'
                )
            )

        other = hg.peer(repo, opts, ui.expandpath(source))
        ui.status(
            _(b'pulling from %s\n') % util.hidepassword(ui.expandpath(source))
        )
        revs = None
        if opts[b'rev']:
            try:
                revs = [other.lookup(rev) for rev in opts[b'rev']]
            except error.CapabilityError:
                err = _(
                    b"other repository doesn't support revision lookup, "
                    b"so a rev cannot be specified."
                )
                raise error.Abort(err)

        # Are there any changes at all?
        modheads = exchange.pull(repo, other, heads=revs).cgresult
        if modheads == 0:
            return 0

        # Is this a simple fast-forward along the current branch?
        newheads = repo.branchheads(branch)
        newchildren = repo.changelog.nodesbetween([parent], newheads)[2]
        if len(newheads) == 1 and len(newchildren):
            if newchildren[0] != parent:
                return hg.update(repo, newchildren[0])
            else:
                return 0

        # Are there more than one additional branch heads?
        newchildren = [n for n in newchildren if n != parent]
        newparent = parent
        if newchildren:
            newparent = newchildren[0]
            hg.clean(repo, newparent)
        newheads = [n for n in newheads if n != newparent]
        if len(newheads) > 1:
            ui.status(
                _(
                    b'not merging with %d other new branch heads '
                    b'(use "hg heads ." and "hg merge" to merge them)\n'
                )
                % (len(newheads) - 1)
            )
            return 1

        if not newheads:
            return 0

        # Otherwise, let's merge.
        err = False
        if newheads:
            # By default, we consider the repository we're pulling
            # *from* as authoritative, so we merge our changes into
            # theirs.
            if opts[b'switch_parent']:
                firstparent, secondparent = newparent, newheads[0]
            else:
                firstparent, secondparent = newheads[0], newparent
                ui.status(
                    _(b'updating to %d:%s\n')
                    % (repo.changelog.rev(firstparent), short(firstparent))
                )
            hg.clean(repo, firstparent)
            p2ctx = repo[secondparent]
            ui.status(
                _(b'merging with %d:%s\n') % (p2ctx.rev(), short(secondparent))
            )
            err = hg.merge(p2ctx, remind=False)

        if not err:
            # we don't translate commit messages
            message = cmdutil.logmessage(ui, opts) or (
                b'Automated merge with %s' % util.removeauth(other.url())
            )
            editopt = opts.get(b'edit') or opts.get(b'force_editor')
            editor = cmdutil.getcommiteditor(edit=editopt, editform=b'fetch')
            n = repo.commit(
                message, opts[b'user'], opts[b'date'], editor=editor
            )
            ui.status(
                _(b'new changeset %d:%s merges remote changes with local\n')
                % (repo.changelog.rev(n), short(n))
            )

        return err

    finally:
        release(lock, wlock)