hgweb: add websub template filter
The purpose of this new filter is to make it possible to partially replace the
functionality of the interhg extension. The idea is to be able to define regular
expression based substitutions on a new "websub" config section. hgweb will then
be able to apply these substitutions wherever the "websub" filter is used on a
template.
This first revision just adds the code necessary to load the websub expressions
and adds the websub filter, but it does not add any calls to the websub filter
itself on any of the templates. That will be done on the following revisions.
$ "$TESTDIR/hghave" svn svn-bindings || exit 80
$ cat >> $HGRCPATH <<EOF
> [extensions]
> convert =
> graphlog =
> EOF
$ svnadmin create svn-repo
$ svnadmin load -q svn-repo < "$TESTDIR/svn/move.svndump"
$ SVNREPOPATH=`pwd`/svn-repo
#if windows
$ SVNREPOURL=file:///`python -c "import urllib, sys; sys.stdout.write(urllib.quote(sys.argv[1]))" "$SVNREPOPATH"`
#else
$ SVNREPOURL=file://`python -c "import urllib, sys; sys.stdout.write(urllib.quote(sys.argv[1]))" "$SVNREPOPATH"`
#endif
Convert trunk and branches
$ hg convert --datesort "$SVNREPOURL"/subproject A-hg
initializing destination A-hg repository
scanning source...
sorting...
converting...
13 createtrunk
12 moved1
11 moved1
10 moved2
9 changeb and rm d2
8 changeb and rm d2
7 moved1again
6 moved1again
5 copyfilefrompast
4 copydirfrompast
3 add d3
2 copy dir and remove subdir
1 add d4old
0 rename d4old into d4new
$ cd A-hg
$ hg glog --template '{rev} {desc|firstline} files: {files}\n'
o 13 rename d4old into d4new files: d4new/g d4old/g
|
o 12 add d4old files: d4old/g
|
o 11 copy dir and remove subdir files: d3/d31/e d4/d31/e d4/f
|
o 10 add d3 files: d3/d31/e d3/f
|
o 9 copydirfrompast files: d2/d
|
o 8 copyfilefrompast files: d
|
o 7 moved1again files: d1/b d1/c
|
| o 6 moved1again files:
| |
o | 5 changeb and rm d2 files: d1/b d2/d
| |
| o 4 changeb and rm d2 files: b
| |
o | 3 moved2 files: d2/d
| |
o | 2 moved1 files: d1/b d1/c
| |
| o 1 moved1 files: b c
|
o 0 createtrunk files:
Check move copy records
$ hg st --rev 12:13 --copies
A d4new/g
d4old/g
R d4old/g
Check branches
$ hg branches
default 13:* (glob)
d1 6:* (glob)
$ cd ..
$ mkdir test-replace
$ cd test-replace
$ svnadmin create svn-repo
$ svnadmin load -q svn-repo < "$TESTDIR/svn/replace.svndump"
Convert files being replaced by directories
$ hg convert svn-repo hg-repo
initializing destination hg-repo repository
scanning source...
sorting...
converting...
6 initial
5 clobber symlink
4 clobber1
3 clobber2
2 adddb
1 clobberdir
0 branch
$ cd hg-repo
Manifest before
$ hg -v manifest -r 1
644 a
644 d/b
644 d2/a
644 @ dlink
644 @ dlink2
644 dlink3
Manifest after clobber1
$ hg -v manifest -r 2
644 a/b
644 d/b
644 d2/a
644 dlink/b
644 @ dlink2
644 dlink3
Manifest after clobber2
$ hg -v manifest -r 3
644 a/b
644 d/b
644 d2/a
644 dlink/b
644 @ dlink2
644 @ dlink3
Manifest after clobberdir
$ hg -v manifest -r 6
644 a/b
644 d/b
644 d2/a
644 d2/c
644 dlink/b
644 @ dlink2
644 @ dlink3
Try updating
$ hg up -qC default
$ cd ..
Test convert progress bar'
$ cat >> $HGRCPATH <<EOF
> [extensions]
> progress =
> [progress]
> assume-tty = 1
> delay = 0
> changedelay = 0
> format = topic bar number
> refresh = 0
> width = 60
> EOF
$ hg convert svn-repo hg-progress
\r (no-eol) (esc)
scanning [ <=> ] 1\r (no-eol) (esc)
scanning [ <=> ] 2\r (no-eol) (esc)
scanning [ <=> ] 3\r (no-eol) (esc)
scanning [ <=> ] 4\r (no-eol) (esc)
scanning [ <=> ] 5\r (no-eol) (esc)
scanning [ <=> ] 6\r (no-eol) (esc)
scanning [ <=> ] 7\r (no-eol) (esc)
\r (no-eol) (esc)
\r (no-eol) (esc)
converting [ ] 0/7\r (no-eol) (esc)
getting files [=====> ] 1/6\r (no-eol) (esc)
getting files [============> ] 2/6\r (no-eol) (esc)
getting files [==================> ] 3/6\r (no-eol) (esc)
getting files [=========================> ] 4/6\r (no-eol) (esc)
getting files [===============================> ] 5/6\r (no-eol) (esc)
getting files [======================================>] 6/6\r (no-eol) (esc)
\r (no-eol) (esc)
\r (no-eol) (esc)
converting [=====> ] 1/7\r (no-eol) (esc)
scanning paths [ ] 0/1\r (no-eol) (esc)
getting files [======================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
\r (no-eol) (esc)
converting [===========> ] 2/7\r (no-eol) (esc)
scanning paths [ ] 0/2\r (no-eol) (esc)
scanning paths [==================> ] 1/2\r (no-eol) (esc)
getting files [========> ] 1/4\r (no-eol) (esc)
getting files [==================> ] 2/4\r (no-eol) (esc)
getting files [============================> ] 3/4\r (no-eol) (esc)
getting files [======================================>] 4/4\r (no-eol) (esc)
\r (no-eol) (esc)
\r (no-eol) (esc)
converting [=================> ] 3/7\r (no-eol) (esc)
scanning paths [ ] 0/1\r (no-eol) (esc)
getting files [======================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
\r (no-eol) (esc)
converting [=======================> ] 4/7\r (no-eol) (esc)
scanning paths [ ] 0/1\r (no-eol) (esc)
getting files [======================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
\r (no-eol) (esc)
converting [=============================> ] 5/7\r (no-eol) (esc)
scanning paths [ ] 0/1\r (no-eol) (esc)
getting files [===> ] 1/8\r (no-eol) (esc)
getting files [========> ] 2/8\r (no-eol) (esc)
getting files [=============> ] 3/8\r (no-eol) (esc)
getting files [==================> ] 4/8\r (no-eol) (esc)
getting files [=======================> ] 5/8\r (no-eol) (esc)
getting files [============================> ] 6/8\r (no-eol) (esc)
getting files [=================================> ] 7/8\r (no-eol) (esc)
getting files [======================================>] 8/8\r (no-eol) (esc)
\r (no-eol) (esc)
\r (no-eol) (esc)
converting [===================================> ] 6/7\r (no-eol) (esc)
scanning paths [ ] 0/3\r (no-eol) (esc)
scanning paths [===========> ] 1/3\r (no-eol) (esc)
scanning paths [========================> ] 2/3\r (no-eol) (esc)
getting files [===> ] 1/8\r (no-eol) (esc)
getting files [========> ] 2/8\r (no-eol) (esc)
getting files [=============> ] 3/8\r (no-eol) (esc)
getting files [==================> ] 4/8\r (no-eol) (esc)
getting files [=======================> ] 5/8\r (no-eol) (esc)
getting files [============================> ] 6/8\r (no-eol) (esc)
getting files [=================================> ] 7/8\r (no-eol) (esc)
getting files [======================================>] 8/8\r (no-eol) (esc)
\r (no-eol) (esc)
initializing destination hg-progress repository
scanning source...
sorting...
converting...
6 initial
5 clobber symlink
4 clobber1
3 clobber2
2 adddb
1 clobberdir
0 branch
$ cd ..