view mercurial/server.py @ 41977:4ea21df312ec stable 4.9.1

record: prevent commits that don't pick up dirty subrepo changes (issue6102)

This path covers interactive mode for commit, amend, and shelve, as well as the
deprecated record extension.  Since shelf creation uses commit without -S in the
non-interactive case, aborting here should be OK.  (I didn't check what happens
to non interactive shelve creation if `ui.commitsubrepos=True` is set.)

subrepoutil.precommit() will abort on a dirty subrepo if the config option isn't
set, but the hint recommends using --subrepos to commit.  Since only the commit
command currently supports that option, the error has to be raised here to omit
the hint.

Doing the check before asking about all of the hunks in the MQ test seems like
an improvement on its own.  There's probably an additional check on this path
that can be removed.

# server.py - utility and factory of server
#
# Copyright 2005-2007 Matt Mackall <[e-mail]>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.

from __future__ import absolute_import

import os

from .i18n import _

from . import (
    chgserver,
    cmdutil,
    commandserver,
    error,
    hgweb,
    pycompat,
    util,
)

from .utils import (
    procutil,
)

def runservice(opts, parentfn=None, initfn=None, runfn=None, logfile=None,
               runargs=None, appendpid=False):
    '''Run a command as a service.'''

    postexecargs = {}

    if opts['daemon_postexec']:
        for inst in opts['daemon_postexec']:
            if inst.startswith('unlink:'):
                postexecargs['unlink'] = inst[7:]
            elif inst.startswith('chdir:'):
                postexecargs['chdir'] = inst[6:]
            elif inst != 'none':
                raise error.Abort(_('invalid value for --daemon-postexec: %s')
                                  % inst)

    # When daemonized on Windows, redirect stdout/stderr to the lockfile (which
    # gets cleaned up after the child is up and running), so that the parent can
    # read and print the error if this child dies early.  See 594dd384803c.  On
    # other platforms, the child can write to the parent's stdio directly, until
    # it is redirected prior to runfn().
    if pycompat.iswindows and opts['daemon_postexec']:
        if 'unlink' in postexecargs and os.path.exists(postexecargs['unlink']):
            procutil.stdout.flush()
            procutil.stderr.flush()

            fd = os.open(postexecargs['unlink'],
                         os.O_WRONLY | os.O_APPEND | os.O_BINARY)
            try:
                os.dup2(fd, procutil.stdout.fileno())
                os.dup2(fd, procutil.stderr.fileno())
            finally:
                os.close(fd)

    def writepid(pid):
        if opts['pid_file']:
            if appendpid:
                mode = 'ab'
            else:
                mode = 'wb'
            fp = open(opts['pid_file'], mode)
            fp.write('%d\n' % pid)
            fp.close()

    if opts['daemon'] and not opts['daemon_postexec']:
        # Signal child process startup with file removal
        lockfd, lockpath = pycompat.mkstemp(prefix='hg-service-')
        os.close(lockfd)
        try:
            if not runargs:
                runargs = procutil.hgcmd() + pycompat.sysargv[1:]
            runargs.append('--daemon-postexec=unlink:%s' % lockpath)
            # Don't pass --cwd to the child process, because we've already
            # changed directory.
            for i in pycompat.xrange(1, len(runargs)):
                if runargs[i].startswith('--cwd='):
                    del runargs[i]
                    break
                elif runargs[i].startswith('--cwd'):
                    del runargs[i:i + 2]
                    break
            def condfn():
                return not os.path.exists(lockpath)
            pid = procutil.rundetached(runargs, condfn)
            if pid < 0:
                # If the daemonized process managed to write out an error msg,
                # report it.
                if pycompat.iswindows and os.path.exists(lockpath):
                    with open(lockpath, 'rb') as log:
                        for line in log:
                            procutil.stderr.write(line)
                raise error.Abort(_('child process failed to start'))
            writepid(pid)
        finally:
            util.tryunlink(lockpath)
        if parentfn:
            return parentfn(pid)
        else:
            return

    if initfn:
        initfn()

    if not opts['daemon']:
        writepid(procutil.getpid())

    if opts['daemon_postexec']:
        try:
            os.setsid()
        except AttributeError:
            pass

        if 'chdir' in postexecargs:
            os.chdir(postexecargs['chdir'])
        procutil.hidewindow()
        procutil.stdout.flush()
        procutil.stderr.flush()

        nullfd = os.open(os.devnull, os.O_RDWR)
        logfilefd = nullfd
        if logfile:
            logfilefd = os.open(logfile, os.O_RDWR | os.O_CREAT | os.O_APPEND,
                                0o666)
        os.dup2(nullfd, procutil.stdin.fileno())
        os.dup2(logfilefd, procutil.stdout.fileno())
        os.dup2(logfilefd, procutil.stderr.fileno())
        stdio = (procutil.stdin.fileno(), procutil.stdout.fileno(),
                 procutil.stderr.fileno())
        if nullfd not in stdio:
            os.close(nullfd)
        if logfile and logfilefd not in stdio:
            os.close(logfilefd)

        # Only unlink after redirecting stdout/stderr, so Windows doesn't
        # complain about a sharing violation.
        if 'unlink' in postexecargs:
            os.unlink(postexecargs['unlink'])

    if runfn:
        return runfn()

_cmdservicemap = {
    'chgunix': chgserver.chgunixservice,
    'pipe': commandserver.pipeservice,
    'unix': commandserver.unixforkingservice,
}

def _createcmdservice(ui, repo, opts):
    mode = opts['cmdserver']
    try:
        servicefn = _cmdservicemap[mode]
    except KeyError:
        raise error.Abort(_('unknown mode %s') % mode)
    commandserver.setuplogging(ui, repo)
    return servicefn(ui, repo, opts)

def _createhgwebservice(ui, repo, opts):
    # this way we can check if something was given in the command-line
    if opts.get('port'):
        opts['port'] = util.getport(opts.get('port'))

    alluis = {ui}
    if repo:
        baseui = repo.baseui
        alluis.update([repo.baseui, repo.ui])
    else:
        baseui = ui
    webconf = opts.get('web_conf') or opts.get('webdir_conf')
    if webconf:
        if opts.get('subrepos'):
            raise error.Abort(_('--web-conf cannot be used with --subrepos'))

        # load server settings (e.g. web.port) to "copied" ui, which allows
        # hgwebdir to reload webconf cleanly
        servui = ui.copy()
        servui.readconfig(webconf, sections=['web'])
        alluis.add(servui)
    elif opts.get('subrepos'):
        servui = ui

        # If repo is None, hgweb.createapp() already raises a proper abort
        # message as long as webconf is None.
        if repo:
            webconf = dict()
            cmdutil.addwebdirpath(repo, "", webconf)
    else:
        servui = ui

    optlist = ("name templates style address port prefix ipv6"
               " accesslog errorlog certificate encoding")
    for o in optlist.split():
        val = opts.get(o, '')
        if val in (None, ''): # should check against default options instead
            continue
        for u in alluis:
            u.setconfig("web", o, val, 'serve')

    app = hgweb.createapp(baseui, repo, webconf)
    return hgweb.httpservice(servui, app, opts)

def createservice(ui, repo, opts):
    if opts["cmdserver"]:
        return _createcmdservice(ui, repo, opts)
    else:
        return _createhgwebservice(ui, repo, opts)