view tests/test-exchange-obsmarkers-case-B6.t @ 41977:4ea21df312ec stable 4.9.1

record: prevent commits that don't pick up dirty subrepo changes (issue6102)

This path covers interactive mode for commit, amend, and shelve, as well as the
deprecated record extension.  Since shelf creation uses commit without -S in the
non-interactive case, aborting here should be OK.  (I didn't check what happens
to non interactive shelve creation if `ui.commitsubrepos=True` is set.)

subrepoutil.precommit() will abort on a dirty subrepo if the config option isn't
set, but the hint recommends using --subrepos to commit.  Since only the commit
command currently supports that option, the error has to be raised here to omit
the hint.

Doing the check before asking about all of the hunks in the MQ test seems like
an improvement on its own.  There's probably an additional check on this path
that can be removed.

============================================
Testing obsolescence markers push: Cases B.6
============================================

Mercurial pushes obsolescences markers relevant to the "pushed-set", the set of
all changesets that requested to be "in sync" after the push (even if they are
already on both side).

This test belongs to a series of tests checking such set is properly computed
and applied. This does not tests "obsmarkers" discovery capabilities.

Category B: pruning case
TestCase 6: Pruned changeset with precursors not in pushed set

B.6 Pruned changeset with precursors not in pushed set
======================================================

.. {{{
..   B ø⇠⊗ B'
..     | |
..   A ○ |
..     |/
..     ● O
.. }}}
..
.. Marker exist from:
..
..  * `B ø⇠⊗ B'`
..  * B' prune
..
.. Command run:
..
..  * hg push -r O
..
.. Expected exchange:
..
..  * `B ø⇠⊗ B'`
..  * B' prune

Setup
-----

  $ . $TESTDIR/testlib/exchange-obsmarker-util.sh

Initial

  $ setuprepos B.6
  creating test repo for test case B.6
  - pulldest
  - main
  - pushdest
  cd into `main` and proceed with env setup
  $ cd main
  $ mkcommit A
  $ mkcommit B0
  $ hg up --quiet 0
  $ mkcommit B1
  created new head
  $ hg debugobsolete `getid 'desc(B0)'` `getid 'desc(B1)'`
  obsoleted 1 changesets
  $ hg prune -qd '0 0' .
  $ hg log -G --hidden
  x  f6298a8ac3a4 (draft): B1
  |
  | x  962ecf6b1afc (draft): B0
  | |
  | o  f5bc6836db60 (draft): A
  |/
  @  a9bdc8b26820 (public): O
  
  $ inspect_obsmarkers
  obsstore content
  ================
  962ecf6b1afc94e15c7e48fdfb76ef8abd11372b f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  $ cd ..
  $ cd ..

Actual Test
-------------------------------------

  $ dotest B.6 O
  ## Running testcase B.6
  # testing echange of "O" (a9bdc8b26820)
  ## initial state
  # obstore: main
  962ecf6b1afc94e15c7e48fdfb76ef8abd11372b f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  # obstore: pulldest
  ## pushing "O" from main to pushdest
  pushing to pushdest
  searching for changes
  no changes found
  remote: 2 new obsolescence markers
  ## post push state
  # obstore: main
  962ecf6b1afc94e15c7e48fdfb76ef8abd11372b f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  962ecf6b1afc94e15c7e48fdfb76ef8abd11372b f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pulldest
  ## pulling "a9bdc8b26820" from main into pulldest
  pulling from main
  no changes found
  2 new obsolescence markers
  ## post pull state
  # obstore: main
  962ecf6b1afc94e15c7e48fdfb76ef8abd11372b f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  962ecf6b1afc94e15c7e48fdfb76ef8abd11372b f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pulldest
  962ecf6b1afc94e15c7e48fdfb76ef8abd11372b f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}