view tests/test-rename-dir-merge.t @ 35069:4fb489a998c9

run-tests: allow to register any arbitrary pattern for replacement

We add a 'common-pattern.py' file that allow to define extra pattern. This seems
a cleaner approach than editing the 'run-test.py' file over and over. In
addition allowing arbitrary pattern registration will also help extension.

The format used is a python file is picked out of convenience defining a list of
tuple in 'substitutions' variable. This is picked out of convenience since it is
dead simple to implement.

The end goal is to register more pattern for Mercurial test. There are multiple
common patterns that change over time. That impact is annoying. Using pattern
emplacement for them would be handy.

The next patches will define all the needed patterns and the last patch will
mass-update the tests outputs as it was easier to do in a single pass.

  $ hg init t
  $ cd t

  $ mkdir a
  $ echo foo > a/a
  $ echo bar > a/b
  $ hg ci -Am "0"
  adding a/a
  adding a/b

  $ hg co -C 0
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg mv a b
  moving a/a to b/a (glob)
  moving a/b to b/b (glob)
  $ hg ci -m "1 mv a/ b/"

  $ hg co -C 0
  2 files updated, 0 files merged, 2 files removed, 0 files unresolved
  $ echo baz > a/c
  $ echo quux > a/d
  $ hg add a/c
  $ hg ci -m "2 add a/c"
  created new head

  $ hg merge --debug 1
    searching for copies back to rev 1
    unmatched files in local:
     a/c
    unmatched files in other:
     b/a
     b/b
    all copies found (* = to merge, ! = divergent, % = renamed and deleted):
     src: 'a/a' -> dst: 'b/a' 
     src: 'a/b' -> dst: 'b/b' 
    checking for directory renames
     discovered dir src: 'a/' -> dst: 'b/'
     pending file src: 'a/c' -> dst: 'b/c'
  resolving manifests
   branchmerge: True, force: False, partial: False
   ancestor: f9b20c0d4c51, local: ce36d17b18fb+, remote: 397f8b00a740
   a/a: other deleted -> r
  removing a/a
   a/b: other deleted -> r
  removing a/b
   b/a: remote created -> g
  getting b/a
   b/b: remote created -> g
  getting b/b
   b/c: remote directory rename - move from a/c -> dm
  moving a/c to b/c (glob)
  3 files updated, 0 files merged, 2 files removed, 0 files unresolved
  (branch merge, don't forget to commit)

  $ echo a/* b/*
  a/d b/a b/b b/c
  $ hg st -C
  M b/a
  M b/b
  A b/c
    a/c
  R a/a
  R a/b
  R a/c
  ? a/d
  $ hg ci -m "3 merge 2+1"
  $ hg debugrename b/c
  b/c renamed from a/c:354ae8da6e890359ef49ade27b68bbc361f3ca88 (glob)

  $ hg co -C 1
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ hg merge --debug 2
    searching for copies back to rev 1
    unmatched files in local:
     b/a
     b/b
    unmatched files in other:
     a/c
    all copies found (* = to merge, ! = divergent, % = renamed and deleted):
     src: 'a/a' -> dst: 'b/a' 
     src: 'a/b' -> dst: 'b/b' 
    checking for directory renames
     discovered dir src: 'a/' -> dst: 'b/'
     pending file src: 'a/c' -> dst: 'b/c'
  resolving manifests
   branchmerge: True, force: False, partial: False
   ancestor: f9b20c0d4c51, local: 397f8b00a740+, remote: ce36d17b18fb
  starting 4 threads for background file closing (?)
   b/c: local directory rename - get from a/c -> dg
  getting a/c to b/c
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)

  $ echo a/* b/*
  a/d b/a b/b b/c
  $ hg st -C
  A b/c
    a/c
  ? a/d
  $ hg ci -m "4 merge 1+2"
  created new head
  $ hg debugrename b/c
  b/c renamed from a/c:354ae8da6e890359ef49ade27b68bbc361f3ca88 (glob)

Local directory rename with conflicting file added in remote source directory
and untracked in local target directory.

  $ hg co -qC 1
  $ echo target > b/c
  $ hg merge 2
  b/c: untracked file differs
  abort: untracked files in working directory differ from files in requested revision
  [255]
  $ cat b/c
  target
but it should succeed if the content matches
  $ hg cat -r 2 a/c > b/c
  $ hg merge 2
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg st -C
  A b/c
    a/c
  ? a/d

Local directory rename with conflicting file added in remote source directory
and committed in local target directory.

  $ hg co -qC 1
  $ echo target > b/c
  $ hg add b/c
  $ hg commit -qm 'new file in target directory'
  $ hg merge 2
  merging b/c and a/c to b/c
  warning: conflicts while merging b/c! (edit, then use 'hg resolve --mark')
  0 files updated, 0 files merged, 0 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg update -C .' to abandon
  [1]
  $ hg st -A
  M b/c
    a/c
  ? a/d
  ? b/c.orig
  C b/a
  C b/b
  $ cat b/c
  <<<<<<< working copy: f1c50ca4f127 - test: new file in target directory
  target
  =======
  baz
  >>>>>>> merge rev:    ce36d17b18fb - test: 2 add a/c
  $ rm b/c.orig

Remote directory rename with conflicting file added in remote target directory
and committed in local source directory.

  $ hg co -qC 2
  $ hg st -A
  ? a/d
  C a/a
  C a/b
  C a/c
  $ hg merge 5
  merging a/c and b/c to b/c
  warning: conflicts while merging b/c! (edit, then use 'hg resolve --mark')
  2 files updated, 0 files merged, 2 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg update -C .' to abandon
  [1]
  $ hg st -A
  M b/a
  M b/b
  M b/c
    a/c
  R a/a
  R a/b
  R a/c
  ? a/d
  ? b/c.orig
  $ cat b/c
  <<<<<<< working copy: ce36d17b18fb - test: 2 add a/c
  baz
  =======
  target
  >>>>>>> merge rev:    f1c50ca4f127 - test: new file in target directory

Second scenario with two repos:

  $ cd ..
  $ hg init r1
  $ cd r1
  $ mkdir a
  $ echo foo > a/f
  $ hg add a
  adding a/f (glob)
  $ hg ci -m "a/f == foo"
  $ cd ..

  $ hg clone r1 r2
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd r2
  $ hg mv a b
  moving a/f to b/f (glob)
  $ echo foo1 > b/f
  $ hg ci -m" a -> b, b/f == foo1"
  $ cd ..

  $ cd r1
  $ mkdir a/aa
  $ echo bar > a/aa/g
  $ hg add a/aa
  adding a/aa/g (glob)
  $ hg ci -m "a/aa/g"
  $ hg pull ../r2
  pulling from ../r2
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (+1 heads)
  new changesets 7d51ed18da25
  (run 'hg heads' to see heads, 'hg merge' to merge)

  $ hg merge
  2 files updated, 0 files merged, 1 files removed, 0 files unresolved
  (branch merge, don't forget to commit)

  $ hg st -C
  M b/f
  A b/aa/g
    a/aa/g
  R a/aa/g
  R a/f

  $ cd ..

Test renames to separate directories

  $ hg init a
  $ cd a
  $ mkdir a
  $ touch a/s
  $ touch a/t
  $ hg ci -Am0
  adding a/s
  adding a/t

Add more files

  $ touch a/s2
  $ touch a/t2
  $ hg ci -Am1
  adding a/s2
  adding a/t2

Do moves on a branch

  $ hg up 0
  0 files updated, 0 files merged, 2 files removed, 0 files unresolved
  $ mkdir s
  $ mkdir t
  $ hg mv a/s s
  $ hg mv a/t t
  $ hg ci -Am2
  created new head
  $ hg st --copies --change .
  A s/s
    a/s
  A t/t
    a/t
  R a/s
  R a/t

Merge shouldn't move s2, t2

  $ hg merge
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg st --copies
  M a/s2
  M a/t2

Try the merge in the other direction. It may or may not be appropriate for
status to list copies here.

  $ hg up -C 1
  4 files updated, 0 files merged, 2 files removed, 0 files unresolved
  $ hg merge
  2 files updated, 0 files merged, 2 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg st --copies
  M s/s
  M t/t
  R a/s
  R a/t