view tests/test-wireproto.t @ 18394:5010448197bc

branchmap: update cache of 'unserved' filter on new changesets

The `commitctx` and `addchangegroup` methods of repo upgrade branchcache after
completion. This behavior aims to keep the branchcache in sync for read only
process as hgweb. See ee317dbfb9d0 for details.

Since changelog filtering is used, those calls only update the cache for unfiltered repo.
One of no interest for typical read only process like hgweb.

Note: By chance in basic case, `repo.unfiltered() == repo.filtered('unserved')`

This changesets have the "unserved" cache updated instead. I think this is the
only cache that matter for hgweb.

We could imagine updating all possible branchcaches instead but:
- I'm not sure it would have any benefit impact. It may even increase the odd of
  all cache being invalidated.
- This is more complicated change.

So I'm going for updating a single cache only which is already better that
updating a cache nobody cares about.

This changeset have a few expected impact on the testsuite are different cache
are updated.

  $ "$TESTDIR/hghave" killdaemons || exit 80

Test wire protocol argument passing

Setup repo:

  $ hg init repo

Local:

  $ hg debugwireargs repo eins zwei --three drei --four vier
  eins zwei drei vier None
  $ hg debugwireargs repo eins zwei --four vier
  eins zwei None vier None
  $ hg debugwireargs repo eins zwei
  eins zwei None None None
  $ hg debugwireargs repo eins zwei --five fuenf
  eins zwei None None fuenf

HTTP:

  $ hg serve -R repo -p $HGPORT -d --pid-file=hg1.pid -E error.log -A access.log
  $ cat hg1.pid >> $DAEMON_PIDS

  $ hg debugwireargs http://localhost:$HGPORT/ un deux trois quatre
  un deux trois quatre None
  $ hg debugwireargs http://localhost:$HGPORT/ \ un deux trois\  qu\ \ atre
   un deux trois  qu  atre None
  $ hg debugwireargs http://localhost:$HGPORT/ eins zwei --four vier
  eins zwei None vier None
  $ hg debugwireargs http://localhost:$HGPORT/ eins zwei
  eins zwei None None None
  $ hg debugwireargs http://localhost:$HGPORT/ eins zwei --five fuenf
  eins zwei None None None
  $ hg debugwireargs http://localhost:$HGPORT/ un deux trois onethousandcharactersxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
  un deux trois onethousandcharactersxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx None
  $ cat error.log
  $ cat access.log
  * - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
  * - - [*] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:four=quatre&one=un&three=trois&two=deux (glob)
  * - - [*] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:four=quatre&one=un&three=trois&two=deux (glob)
  * - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
  * - - [*] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:four=qu++atre&one=+un&three=trois+&two=deux (glob)
  * - - [*] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:four=qu++atre&one=+un&three=trois+&two=deux (glob)
  * - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
  * - - [*] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:four=vier&one=eins&two=zwei (glob)
  * - - [*] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:four=vier&one=eins&two=zwei (glob)
  * - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
  * - - [*] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:one=eins&two=zwei (glob)
  * - - [*] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:one=eins&two=zwei (glob)
  * - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
  * - - [*] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:one=eins&two=zwei (glob)
  * - - [*] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:one=eins&two=zwei (glob)
  * - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
  * - - [*] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:four=onethousandcharactersxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx&one x-hgarg-2:=un&three=trois&two=deux (glob)
  * - - [*] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:four=onethousandcharactersxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx&one x-hgarg-2:=un&three=trois&two=deux (glob)

HTTP without the httpheader capability:

  $ HGRCPATH="`pwd`/repo/.hgrc"
  $ export HGRCPATH
  $ CAP=httpheader
  $ . "$TESTDIR/notcapable"

  $ hg serve -R repo -p $HGPORT2 -d --pid-file=hg2.pid -E error2.log -A access2.log
  $ cat hg2.pid >> $DAEMON_PIDS

  $ hg debugwireargs http://localhost:$HGPORT2/ un deux trois quatre
  un deux trois quatre None
  $ hg debugwireargs http://localhost:$HGPORT2/ eins zwei --four vier
  eins zwei None vier None
  $ hg debugwireargs http://localhost:$HGPORT2/ eins zwei
  eins zwei None None None
  $ hg debugwireargs http://localhost:$HGPORT2/ eins zwei --five fuenf
  eins zwei None None None
  $ cat error2.log
  $ cat access2.log
  * - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
  * - - [*] "GET /?cmd=debugwireargs&four=quatre&one=un&three=trois&two=deux HTTP/1.1" 200 - (glob)
  * - - [*] "GET /?cmd=debugwireargs&four=quatre&one=un&three=trois&two=deux HTTP/1.1" 200 - (glob)
  * - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
  * - - [*] "GET /?cmd=debugwireargs&four=vier&one=eins&two=zwei HTTP/1.1" 200 - (glob)
  * - - [*] "GET /?cmd=debugwireargs&four=vier&one=eins&two=zwei HTTP/1.1" 200 - (glob)
  * - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
  * - - [*] "GET /?cmd=debugwireargs&one=eins&two=zwei HTTP/1.1" 200 - (glob)
  * - - [*] "GET /?cmd=debugwireargs&one=eins&two=zwei HTTP/1.1" 200 - (glob)
  * - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
  * - - [*] "GET /?cmd=debugwireargs&one=eins&two=zwei HTTP/1.1" 200 - (glob)
  * - - [*] "GET /?cmd=debugwireargs&one=eins&two=zwei HTTP/1.1" 200 - (glob)

SSH (try to exercise the ssh functionality with a dummy script):

  $ cat <<EOF > dummyssh
  > import sys
  > import os
  > os.chdir(os.path.dirname(sys.argv[0]))
  > if sys.argv[1] != "user@dummy":
  >     sys.exit(-1)
  > if not os.path.exists("dummyssh"):
  >     sys.exit(-1)
  > os.environ["SSH_CLIENT"] = "127.0.0.1 1 2"
  > r = os.system(sys.argv[2])
  > sys.exit(bool(r))
  > EOF

  $ hg debugwireargs --ssh "python ./dummyssh" ssh://user@dummy/repo uno due tre quattro
  uno due tre quattro None
  $ hg debugwireargs --ssh "python ./dummyssh" ssh://user@dummy/repo eins zwei --four vier
  eins zwei None vier None
  $ hg debugwireargs --ssh "python ./dummyssh" ssh://user@dummy/repo eins zwei
  eins zwei None None None
  $ hg debugwireargs --ssh "python ./dummyssh" ssh://user@dummy/repo eins zwei --five fuenf
  eins zwei None None None

Explicitly kill daemons to let the test exit on Windows

  $ "$TESTDIR/killdaemons.py" $DAEMON_PIDS