view tests/test-check-code.t @ 22182:510cafe72004 stable

incoming: don't request heads that already are common

Pull would send a getbundle command where common heads were sent both as common
and head, even though there is no reason to request a common head.
The request was thus twice as big as necessary and more likely to hit HTTP
header size limits.

Instead, don't request heads that already are common.

This is fixed in bundlerepo.getremotechanges . It could perhaps also have been
fixed in discovery.findcommonincoming but that would have a bigger impact.

  $ cat > correct.py <<EOF
  > def toto(arg1, arg2):
  >     del arg2
  >     return (5 + 6, 9)
  > EOF
  $ cat > wrong.py <<EOF
  > def toto( arg1, arg2):
  >     del(arg2)
  >     return ( 5+6, 9)
  > EOF
  $ cat > quote.py <<EOF
  > # let's use quote in comments
  > (''' ( 4x5 )
  > but """\\''' and finally''',
  > """let's fool checkpatch""", '1+2',
  > '"""', 42+1, """and
  > ( 4-1 ) """, "( 1+1 )\" and ")
  > a, '\\\\\\\\', "\\\\\\" x-2", "c-1"
  > EOF
  $ cat > non-py24.py <<EOF
  > # Using builtins that does not exist in Python 2.4
  > if any():
  >     x = all()
  >     y = format(x)
  >     # next(generator) is new in 2.6
  >     z = next(x)
  >     # but generator.next() is okay
  >     x.next()
  >     # and we can make our own next
  >     def next(stuff):
  >         pass
  > 
  > # Do not complain about our own definition
  > def any(x):
  >     pass
  > 
  > # try/except/finally block does not exist in Python 2.4
  >     try:
  >         pass
  >     except StandardError, inst:
  >         pass
  >     finally:
  >         pass
  > 
  > # nested try/finally+try/except is allowed
  >     try:
  >         try:
  >             pass
  >         except StandardError, inst:
  >             pass
  >     finally:
  >         pass
  > 
  > # yield inside a try/finally block is not allowed in Python 2.4
  >     try:
  >         pass
  >         yield 1
  >     finally:
  >         pass
  >     try:
  >         yield
  >         pass
  >     finally:
  >         pass
  > 
  > EOF
  $ cat > classstyle.py <<EOF
  > class newstyle_class(object):
  >     pass
  > 
  > class oldstyle_class:
  >     pass
  > 
  > class empty():
  >     pass
  > 
  > no_class = 1:
  >     pass
  > EOF
  $ check_code="$TESTDIR"/../contrib/check-code.py
  $ "$check_code" ./wrong.py ./correct.py ./quote.py ./non-py24.py ./classstyle.py
  ./wrong.py:1:
   > def toto( arg1, arg2):
   gratuitous whitespace in () or []
  ./wrong.py:2:
   >     del(arg2)
   Python keyword is not a function
  ./wrong.py:3:
   >     return ( 5+6, 9)
   gratuitous whitespace in () or []
   missing whitespace in expression
  ./quote.py:5:
   > '"""', 42+1, """and
   missing whitespace in expression
  ./non-py24.py:2:
   > if any():
   any/all/format not available in Python 2.4
  ./non-py24.py:3:
   >     x = all()
   any/all/format not available in Python 2.4
  ./non-py24.py:4:
   >     y = format(x)
   any/all/format not available in Python 2.4
  ./non-py24.py:6:
   >     z = next(x)
   no next(foo) in Python 2.4 and 2.5, use foo.next() instead
  ./non-py24.py:18:
   >     try:
   no try/except/finally in Python 2.4
  ./non-py24.py:35:
   >     try:
   no yield inside try/finally in Python 2.4
  ./non-py24.py:40:
   >     try:
   no yield inside try/finally in Python 2.4
  ./classstyle.py:4:
   > class oldstyle_class:
   old-style class, use class foo(object)
  ./classstyle.py:7:
   > class empty():
   class foo() not available in Python 2.4, use class foo(object)
  [1]
  $ cat > python3-compat.py << EOF
  > foo <> bar
  > reduce(lambda a, b: a + b, [1, 2, 3, 4])
  > dict(key=value)
  > EOF
  $ "$check_code" python3-compat.py
  python3-compat.py:1:
   > foo <> bar
   <> operator is not available in Python 3+, use !=
  python3-compat.py:2:
   > reduce(lambda a, b: a + b, [1, 2, 3, 4])
   reduce is not available in Python 3+
  python3-compat.py:3:
   > dict(key=value)
   dict() is different in Py2 and 3 and is slower than {}
  [1]

  $ cat > is-op.py <<EOF
  > # is-operator comparing number or string literal
  > x = None
  > y = x is 'foo'
  > y = x is "foo"
  > y = x is 5346
  > y = x is -6
  > y = x is not 'foo'
  > y = x is not "foo"
  > y = x is not 5346
  > y = x is not -6
  > EOF

  $ "$check_code" ./is-op.py
  ./is-op.py:3:
   > y = x is 'foo'
   object comparison with literal
  ./is-op.py:4:
   > y = x is "foo"
   object comparison with literal
  ./is-op.py:5:
   > y = x is 5346
   object comparison with literal
  ./is-op.py:6:
   > y = x is -6
   object comparison with literal
  ./is-op.py:7:
   > y = x is not 'foo'
   object comparison with literal
  ./is-op.py:8:
   > y = x is not "foo"
   object comparison with literal
  ./is-op.py:9:
   > y = x is not 5346
   object comparison with literal
  ./is-op.py:10:
   > y = x is not -6
   object comparison with literal
  [1]

  $ cat > for-nolineno.py <<EOF
  > except:
  > EOF
  $ "$check_code" for-nolineno.py --nolineno
  for-nolineno.py:0:
   > except:
   naked except clause
  [1]

  $ cat > warning.t <<EOF
  >   $ function warnonly {
  >   > }
  >   $ diff -N aaa
  >   $ function onwarn {}
  > EOF
  $ "$check_code" warning.t
  $ "$check_code" --warn warning.t
  warning.t:1:
   >   $ function warnonly {
   warning: don't use 'function', use old style
  warning.t:3:
   >   $ diff -N aaa
   warning: don't use 'diff -N'
  warning.t:4:
   >   $ function onwarn {}
   warning: don't use 'function', use old style
  [1]
  $ cat > raise-format.py <<EOF
  > raise SomeException, message
  > # this next line is okay
  > raise SomeException(arg1, arg2)
  > EOF
  $ "$check_code" not-existing.py raise-format.py
  Skipping*not-existing.py* (glob)
  raise-format.py:1:
   > raise SomeException, message
   don't use old-style two-argument raise, use Exception(message)
  [1]

  $ cat > rst.py <<EOF
  > """problematic rst text
  > 
  > .. note::
  >     wrong
  > """
  > 
  > '''
  > 
  > .. note::
  > 
  >     valid
  > 
  > new text
  > 
  >     .. note::
  > 
  >         also valid
  > '''
  > 
  > """mixed
  > 
  > .. note::
  > 
  >   good
  > 
  >     .. note::
  >         plus bad
  > """
  > EOF
  $ $check_code -w rst.py
  rst.py:3:
   > .. note::
   warning: add two newlines after '.. note::'
  rst.py:26:
   >     .. note::
   warning: add two newlines after '.. note::'
  [1]

  $ cat > ./map-inside-gettext.py <<EOF
  > print _("map inside gettext %s" % v)
  > 
  > print _("concatenating " " by " " space %s" % v)
  > print _("concatenating " + " by " + " '+' %s" % v)
  > 
  > print _("maping operation in different line %s"
  >         % v)
  > 
  > print _(
  >         "leading spaces inside of '(' %s" % v)
  > EOF
  $ "$check_code" ./map-inside-gettext.py
  ./map-inside-gettext.py:1:
   > print _("map inside gettext %s" % v)
   don't use % inside _()
  ./map-inside-gettext.py:3:
   > print _("concatenating " " by " " space %s" % v)
   don't use % inside _()
  ./map-inside-gettext.py:4:
   > print _("concatenating " + " by " + " '+' %s" % v)
   don't use % inside _()
  ./map-inside-gettext.py:6:
   > print _("maping operation in different line %s"
   don't use % inside _()
  ./map-inside-gettext.py:9:
   > print _(
   don't use % inside _()
  [1]

web templates

  $ mkdir -p mercurial/templates
  $ cat > mercurial/templates/example.tmpl <<EOF
  > {desc}
  > {desc|escape}
  > {desc|firstline}
  > {desc|websub}
  > EOF

  $ "$check_code" --warnings mercurial/templates/example.tmpl
  mercurial/templates/example.tmpl:2:
   > {desc|escape}
   warning: follow desc keyword with either firstline or websub
  [1]